Glazed Floor Tile 300*300 Item Code CMAX3003

Ref Price:
Loading Port:
Guangzhou
Payment Terms:
TT OR LC
Min Order Qty:
500 m²
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Product Brief Introduction

 

Glazed Floor Tile 300*300mm, CMAX3003 is one of the popular models of 300*300 mm glazed floor tile, which is wildly used for floor of kitchen and bathroom as well as balcony and bedroom. These tiles could create an antique feel of classic European life, just like living in the old times of nature and pastoral life.  

 

Product Features

  Glazed Floor Tile

  Grade AAA available only

  Strict quality control system

  Much competitive price in the whole supplying market

  Standard export packing: Paper Carton+ Solid Wooden Pallet

  Fast production arrangement

  OEM service could be offered based on the actual requirement

  Comprehensive Marketing support on samples, catalogues as well as carton designing

  Professional sales team who could offer service during the whole purchasing process, from the beginning to the ending.

 

Product Specification 

 

  Tile Type: Dry-Pressed Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 3% -- 6%

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

 

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  11pcs/Ctn, 18.5kg/Ctn,1472Ctns/20’Fcl, 1457.28m2/20’Fcl

 

Production Line & Package 

 

Glazed Floor Tile 300*300 Item Code CMAX3003

Glazed Floor Tile 300*300 Item Code CMAX3003

FAQ

 

1.    For Ceramic Glazed Floor Tile, what are the regular sizes?

—— The regular sizes are 30*30, 40*40 and 45*45.  

 

         2.   Could we arrange the our own QC to check the items before container loading?

—— Yes, of course. Your quality checking will be welcome all the times.

3.   What is the delivery time after we paid the deposit?

—— Normally, we shall get all items ready for loading within 3 weeks after we get the deposit or the formal Letter of Credit. For orders which demand cutting job, it will take a longer time.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:major issue replacing bathroom tile?
Once you pull up the tiles and the old and get to the original subfloor you can put your backerboard directly on that. You don't need an extra layer of plywood. If you feel the subfloor is not sufficient you need to replace it too. If the subfloor is sturdy it is okay to put down a layer of thinset, then put down your backer, then screw the backer and fill the seams with thinset and the appropriate seam tape. Then lay your tiles like normal.
Q:Ceramic tile or concrete under linoleum?
You will need to remove the tiles and clean the tile adhesive from the concrete or put down a plywood subfloor. Linoleum will in a very short time show any dimple, pimple or ridge that is under it. As an alternative, wouldn't it be better to rehabilitate and regrout the existing ceramic tiles? Lino seems like quite a come down from ceramic. If you're on a budget and the color of the tiles is wrong or some are cracked, replace the cracked ones with light colored tiles of similar thickness. Clean the tile floor thoroughly and paint it. When dry, apply a pattern by dabbing with a sponge dipped in a much lighter shade, then paint the grout by running a brush along the grout lines using an appropriate color. When dry apply 3 coats of satin finish urethane. I've used this method to rehabilitate ceramic floors twice now. The first time was in my son's house 3 years ago and it still looks acceptable despite the best efforts of my 3 grandchildren Good luck
Q:I have a tile problem!!!!!!!?
Other than replacing the tile( which is a challenge for anybody) , all I recommend to my costumers is to cover the chip with an enamel to hide as best as possible. Grout won t hold since it s shallow and nothing to grip to.And the big splotch will stand out worse.An appliance repair enamel works well if you can find one to match or your tile is of a color that you can match..A rug or furniture is always a good stand by trick. GL
Q:where to get floor tiles @ good price?
Assuming you want ceramic tile, your bigger concern is installing it correctly then getting a better quality. You pay more for the style of the tile or if you get a natural stone tile. If you are not to particular about what you want then you should be able to get a remnant. May be even put 2 remnants together and make a pattern. Pinwheel pattern is one of my favorites. I would suggest going to the local flooring stores and checking out there rems and go to the ones that have designers for sales people. They offer a lot of design ideas free of charge.
Q:any ideas on how to get grout of my tile floor?
Moisten the joints between the tiles with a little bit of water. This makes the grout naturally flow into the crevices and away from the face of your tile. Work in small sections, cleaning the surface of the tile as you go. The longer you wait, the more the grout will set and the harder it will be to remove. Clean the tiles with a damp sponge. After you apply the grout to the joints of the tiles, use a damp sponge to wipe the surface of each tile clean. You may want to go over it a few times to make sure that no excess grout remains. Sweep all the grout to one area, and then wipe it with a rag if necessary. Find a pH balanced cleanser. If grout or residue still remains on the tile, use a gentle cleaner to scrub the surface. If you left the grout on too long and it cured on the tile, you may need an acid-based solution.
Q:why tile installed was defective?
Installing Tile can be a beautiful thing, but it can also be a terrible mess if not done correctly. A few things that could cause this is: Did you use mastic(glue) or thinset(concrete)? If you used Mastic that is not a good thing for an entire install on a floor, it should only be used as a repair or on small tile on a wall as it never truely dries gue to the outsite of the glue crusts and the center of the tile stays wet. If you used thinset was it mixed properly as that can be an issue due to coverage and set time. Did the back of the tile have dust on them from the box (the mill making these is dusty and sometimes tiles need to be cleaned before install) was the surface properly preped before you started? It needs to be a clean porus surface, if it is sealed or painted the tiles will not stick. Those are the most common issues, I hope this helps
Q:affordable tile flooring?
Try the materials for sale section of OKorder.com
Q:How do i stagger tile effect laminate flooring?...?
The tiles should be the same size or in a pattern such that you can off set the joints and still have the tilegrout lines still line up. Or some of them you can both off set the joints and do a offset or brick pattern in the laminate itself. This type of laminate you ll need more than normal scrap because you will scrap more out on this type of laminate. Any questions you can e mail me through my avatar, I ve attended several installation seminars as well as installed a few 100,000 s/f.. GL
Q:wood stove tile mural?
Your best bet is going to be to go to your local craft store. They have mosiac tiles and grout you can buy. It would probably be a lot easier on you to put the mural onto the board first, then mount the board on the wall where you want it. How big the mural end up being is purely a matter of your choice, but before you actually mount them and tile them you will want to lay out the design so that you can have a solid idea of where everything needs to be, and whether you have enough tiles to do the job. If you don't want to buy the tiles they have at the craft store, I have heard of people using old dishes, broken up and used. Some people go to garage sales looking for dishes just for this reason.
Q:Can you lay ceramic tile on wood flooring?
Yes you can, if in good condition. If you have hardwood over planks, then it won't move anymore than having cement board over planks will. 1.5 inches of wood in excellent condition doesn't have enough bounce to bother tile. Cement board is overkill in most jobs. And not that great of one in the first place. On the flip side, If it is not an overkill, then it probably isn't enough. Any tile that goes over the seams of the cement board, is at high risk for cracking. Tile in the center of cement board is very safe. Mine you if the joists aren't strong enough, it won't matter what the sub floor is or how many layers of cement board you have, you can't do tile. If the floor moves a 1/16th of an inch when 300 pounds is set in one spot, then you have to reinforce or replace the joists, nothing else will fix it. This is how most plank floors fail. Old floors often are built with 2x6 lumber spanning 10 feet. And then there is the new technology: Tile membranes. Cement board harden the floor so it doesn't move. Tile membranes create a floating layer for the tile to sit on. As long as the floor doesn't move more than an 1/8 at the extreme, the tile won't crack on top of a tile membrane. Tile membranes cost about 1.00 to 1.80 US dollars a square foot. The basic membrane is 1/8 of an inch thick. Due to price most tile installers have rarely or never used it, so be prepared to see skeptics. common membrane brands: Schluter®-DITRA is the favorite of TV shows like Holmes on Homes and is sold at home depot among other places. Homelux is sold at Menards

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range