Glass Fiber Reinforced Polymer Pipe Low thermo-conductivity in high quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
PRODUCT DESCRIPTION
1.Pipe Introduction
It is the ideal product for the transportations of the chemicals, drinking water, waste water, waste gas and sewer.
2.Production Range
Any type and specification RPMP of diameter DN400-DN4000 and pressure PN0.25-PN2.5MPa can be produced. Also, we can provide the customized product according to user’s specific requirements.
3.Application
Due to its own advantages, the RPMP is used extensively in the city engineering water supply and drainage, the water supply and the drainage or the recycle water in the electric factory, the waste water treatment, the oil chemical industry and so on.
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
CHARACTERISTICS
1. High anti-corrosion capability, long designed service time of 20 years;
2. Good hydraulic property, smooth inner surface with absolute roughness of 0.01mm, which is far less than that of carbon steel pipe or cast iron pipe;
3. Lightweight and facility to install and transport;
4. High specific intensity and reliable mechanical performance;
5. Low thermo-conductivity and small thermo-stress, which are allowed to be used in various conditions: exposed buried or suspended, in ocean or in deserts, freezing or humid;
COMPANT DESCRIPTION
CNBM,China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
PACKAGING & DELIVERY
1.Packaging Details
Standard packing or your requirement
2.Delivery Detail
Shipped in 25 days after payment
FAQ
1.Q:Are you factory or trading company ?
A:We are Factory produce FRP machines and FRP products.
2.Q:If can customized by customers requirements?
A:yes,we can produce the machine with customized size.
3.Q:How about the payment?
A:We accept any kind of payment.
PICTURES
- Q:Why FRP pipe corrosion?
- If it is ordinary water, generally does not count corrosion, there will be no obvious corrosion, long time began to soak rotten.
- Q:Mending method for glass fiber reinforced plastic pipe
- Tip: if glass fibre reinforced plastic pipe is broken, it is suggested to replace it with new pipe.
- Q:What are the specifications of glass fibre reinforced plastic cable pipes? What are they?
- Strong corrosion resistance, insulation, non magnetic, acid, alkali, flame retardant, anti-static. The utility model has the advantages of good elasticity of bending modulus, complete solution of the corrosion of the metal pipe, no distortion and elasticity, and the defects that the plastic tube is easy to aging and the impact resistance is poor. Good water resistance, can be used in damp or water for a long time without deterioration. Due to the specific properties of glass fiber reinforced plastic, the service life of the glass steel pipe is more than 50 years. The construction is convenient, in particular the repair project, the efficiency is particularly prominent, is the power cable communication cable engineering, municipal engineering and road underground cable is the most ideal protective device, the cable bridge across the river, the use of the most suitable and convenient.
- Q:What is the standard of flange coefficient for FRP ducts?
- That quota said: glass steel duct, pipe fittings, flange and reinforcing frame are in accordance with the finished preparation, only the wind pipe and the valve flange connection, before the implementation of the equipment support within the 20kg section, multiplied by the coefficient 1.4. Glass fiber reinforced plastic wind pipe is finished product: when it is made, there are moulds. According to the design of the drawing, the mould is made. The flange and the air duct are one! Remove the mold and install the hole on the flange! In general negotiations with the manufacturers directly n yuan / square meter (production, installation), whether it involves the number of flanges, such as included, there is no need to re count, direct calculation of the inner diameter of the air duct is the expansion area!
- Q:How can I replace the valve on the water supply pipe?
- Can be arranged according to the construction plan, the first excavation processing and then steel flange three pipe production, water supply operation again when all the preparatory work is completed, and according to the steel flange three pipe length decided to cut the glass steel pipes length;
- Q:There is a gap between the new glass fiber reinforced plastic pipe and its through wall. How can the plug be prevented from leaking through the cracks around the pipe?
- Through wall holes, made of other materials, wall fittings, ship wall fittings and glass fibre reinforced plastic pipes, flanges or other forms of connections are used, which may be referred to the application of the components of the ship piping;
- Q:Which is better, PVC pipe and GRP pipe?!
- Of course, FRP pipe, high strength, aging resistance, PVC too crisp
- Q:What are the disadvantages of glass fiber reinforced sand pipe?
- Not agree with the recommended answer, the same thickness of glass fiber reinforced plastic sand pipe and process tube, process tube stiffness is not low (can be calculated). The effect of sand inclusion is mainly to reduce the cost.
- Q:What is the stiffness of FRP pipe?
- The ring stiffness is the comprehensive parameter of the tube's resistance to external pressure. Obviously, the choice of ring stiffness is one of the keys to ensure the safe operation of plastic underground drainage pipe under the external compressive load. If the ring stiffness of the tube is too small, the tube may undergo excessive deformation or buckling failure. On the other hand, if the ring stiffness is chosen too high, the excessive cross section moment of inertia must be used, which will result in too much material and too high cost.
- Q:What is the heat preservation of the plumbing pipe now? I'd like to use fiberglass Seek help from a master
- I think that you can use magnesium aluminum silicate pipe because this product is suitable for oil pipeline and pipe insulation insulation general insulation are using the products and for foam asbestos products no pollution of construction
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Glass Fiber Reinforced Polymer Pipe Low thermo-conductivity in high quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords