Gasket SBR Rubber Ring DN150 On Sanitary

Ref Price:
Loading Port:
China main port
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
30000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Description of gasket :
This results in alternating layers of filler and metal. The filler material in these gaskets acts as the sealing element, with the metal providing structural support. These gaskets have proven to be reliable in most applications, and allow lower clamping forces than solid gaskets, albeit with a higher cost.
It could be standard style,it just formed stainless steel and graphite or non asbestos etc.
It could be add inner ring or outter ring.The material ring  could be carbon steel or stainless steel.

2.Features of gasket :
• Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel t
3.Gasket Images:
Gasket SBR Rubber Ring DN150 On Sanitary

Gasket SBR Rubber Ring DN150 On Sanitary

4.Specifications of the gasket:
• We can produce according to your samples, design or specification.
• Reasonable Price, Prompt Delivery, Quality Assurance, considerate service.
• We also can design and manufacture rubber mold and rubber products by ourselves. Yes, you can get the High quality and best price.
• We value every customer and every order be it one piece or thousands.
• To get more details and any questions, please feel free to contact us. We are always ready to provide you the quality service.
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would raise the price by any reason.
               2.They willn't provide the high qualities to you cause it had the cheap price.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:Should i pay for it If some product need molds?
Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order.
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.
Ask 5:What's the FOB port?
Anser:Our port are Shanghai and Ningbo usual.
Ask 6:Your price seems higher than others.
Answer:As you know,Price equals qualities.We have faith in our qualites.But it must be in the acceptable range

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why do rubber products Blister?
A lot of reasons, but the main factors are: 1) there are 2 water) mixed rubber Mooney viscosity high fluidity of the compound 3) poor curing pressure lowFrom what you say without adding mold agent foaming phenomenon is more obvious in terms of liquidity, the reason may not glue a problem.
Q:Properties and specific uses of various rubbers
Rubber is divided into natural rubber and synthetic rubber. Natural rubber is mainly derived from the Hevea tree. When the epidermis of this rubber tree is cut open, it will shed milky juice. It is called latex, and the latex will be natural rubber when it is condensed, washed, molded and dried. Rubber productsSynthetic rubber is made by synthetic methods, and different kinds of rubber can be synthesized with different raw materials (monomers). Such as, butadiene rubber, chloroprene rubber, styrene butadiene rubber and so on. The yield of synthetic rubber has greatly exceeded that of natural rubber, of which the largest yield is styrene butadiene rubber.
Q:What are the causes of cracks in vulcanized rubber products?
1. Add some oil, 2. And reduce accelerator or vulcanizing agent 3., reduce the sulfidation temperature 4. After complete cooling
Q:Does antirust oil affect rubber?
Anti rust oil has an effect on rubber, and butadiene rubber is recommended!
Q:Why does rubber stink?
The word "rubber" comes from the Indian language "cau-uchu", meaning "weeping tree"". Natural rubber is flowing out from the Hevea latex when tapping after solidification and drying process. In 1770, British chemist J. Priestley discovered that rubber could be used to erase pencil writing. The material used at that time was called rubber, which has been used so far. The molecular chain of rubber can be crosslinked, and the crosslinked rubber can recover quickly when it is deformed by external force, and has good physical and mechanical properties and chemical stability. Rubber is the basic raw material of rubber industry. It is widely used in making tyres, rubber hoses, tapes, cables and other kinds of rubber products.
Q:What are the uses of ethylene propylene rubber?
Ethylene propylene rubber (EPR) is the most widely used automotive industry. It is mainly used in automobile seals, radiator hoses, spark plug sheaths, air conditioning hoses, rubber pads, hoses and so on. In the automotive sealing industry, mainly the use of EPDM, elastic characteristics of ozone resistance, weather resistance, EPDM rubber type ENB has become a main material of automobile rubber seal, domestic consumption has exceeded 10 thousand tons, but due to its variety, half rely on imports.
Q:What is the rubber composition and function of the airplane tyres?
Rubber is divided into natural rubber and synthetic rubber. Natural rubber is mainly derived from the Hevea tree. When the epidermis of this rubber tree is cut open, it will shed milky juice. It is called latex, and the latex will be natural rubber when it is condensed, washed, molded and dried. Synthetic rubber is made by synthetic methods, and different kinds of rubber can be synthesized with different raw materials (monomers). Between 1900 and 1910, chemist C.D. Harris (Harris) measured the structure of natural rubber as a polymer of isoprene, which opened the way for synthetic rubber. In 1910, Russian chemist SV Lebedev (Lebedev, 1874 - 1934) with sodium initiator 1, sodium 3 - butadiene rubber polymerization into small, then there are many new varieties of synthetic rubber, such as polybutadiene rubber, chloroprene rubber, styrene butadiene rubber and so on. The yield of synthetic rubber has greatly exceeded that of natural rubber, of which the largest yield is styrene butadiene rubber. General rubber glue refers to replace some or all use such as natural rubber, styrene butadiene rubber, butadiene rubber, isoprene rubber, mainly used in the manufacture of tyres and rubber products industry. General purpose rubber is in great demand and is the main variety of synthetic rubber. Styrene butadiene rubber styrene butadiene rubber [1] is made by copolymerization of butadiene and styrene. It is the largest synthetic rubber with milk, styrene butadiene rubber, styrene butadiene rubber and thermoplastic elastomer (SBS).
Q:How to maintain and store the rubber material?
When storing, matters needing attention are:(1) should be stored in a ventilated, dry environment, the relative humidity of the air is 50% ~ 80%.(2) should be stored in non corrosive media, and away from the heat source, the temperature is about 5 degrees Celsius conditions(3) packing should be kept as far as possible without box stacking
Q:What gum does rubber and metal stick together?
JL-499 resistance to 150 degrees high temperature instant glue: waterproof, high temperature resistance, with metal, electroplating materials, plastic, rubber and so on between the bonding, metal bonding, high strength, impact resistance, peeling. With high performance, high strength, single component, waterproof, high temperature resistance, anti-aging and other excellent performance, it is suitable for continuous production line operation. It is used for bonding metal, electroplating material, metal, rubber, electronic component, circuit board, glass, ceramic and so on.
Q:What plastic rubber will not be subjected to oil (such as transformer oil) by quality (e.g., aging, dissolution)?
Generally, aging and dissolution occur. If you want to make the structure, you can choose XF POM C13031 Ticona of the company. This is the company specializing in the development of temperature resistance, oil (especially gasoline, diesel) products.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range