galvanized malleable iron pipe clamps

Ref Price:
$0.03 / pc
Loading Port:
Qingdao
Payment Terms:
TT LC
Min Order Qty:
100 pcs pc
Supply Capability:
300000pcs Per Month pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Usage: Pipe Clamp
Material: steel、matel;Galvanized iron ,stainles
Band width:3mm/20mm
Connection:welding
Model number:As your requirement
Structure:Swivel clamp
Certificate:ISO9001:2008
Feature:
1.Use the open internal and external circle structure,and with screw fixed.It is effectively to solve the problem that when small diameter solft tube connect the hared tube,it is easy appear dead angle,and liquid or gas leakage problem.Easy structure,Easy maked.
2.Edge is no burrfree,it is ability to prevent the tube damaged
3.By a efficiently hydrogen relief treatment,long-term use needn't to worry fracture and other problems
Surface: zinc plated Packaging
4.Accord with DIN3017 Standard.By 48 hours salt and fog test,it has a good corrosion resistance
5.By our last 48 hours elastic test,to insure a high strength mechanical properties.
6.Easy to fix.
Working Temp: -40 ℃ ~ 110 ℃
Size:3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2
Structure: Suspension Clamp and so on On-time shipment and pre-shipment product quality safeguards clamp is mainly used in automobiles,tractors, ships, gasoline engine, and so on each kind of mechanical
device for oil, gas, hydraulic hose connector, various types of
rubber tube interface must join parts fastening.
Detail: plywood case ,pallets or any other package as buyer's requirements
Delivery Detail: about 20-30days

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why my fridge had put popsicle or ice cream frozen stiff
The first refrigerant into the freezer, it is necessary to check whether the refrigerant is enough, good effect of the freezer, the temperature in the refrigerator, the refrigerator temperature control is good, in the long, low efficiency of compressor.
Q:A fire was found with a ground electricity? Stealing electricity.
To do so is very dangerous, prone to accidents, in case the public grounding wire grounding resistance is large, it will cause the water running electricity, indirectly causing electrocution, death accident, that would be troublesome
Q:Can the 5 (20) A meter withstand the current of 30A?
Able to withstand, but not for long periods of time, potentially dangerous
Q:How to measure the motor current with a multimeter?
Measurement of direct current. The first black probe into "COM" hole. If the measured current is more than 200mA, will be the red pen into the "10A" Jack and the knob to direct "10A"; if the current measurement is less than 200mA, the red pen into the "200mA" Jack will knob to the appropriate range of DC within 200mA. When adjusted, it can be measured. String the multimeter into the circuit and keep it steady until you read it. If the display is "1.", then to increase the range; if the numerical left "-" appears, indicates that the current from flowing into the black pen multimeter.
Q:What is the difference between the clamp meter and the universal table?
The clamp type meter measures very large current, and the multimeter can measure small current, and the caliper type meter doesn't need to be broken when measuring.
Q:Methods use a table clamp type table and the matters needing attention
The measurement in high voltage loop, prohibit the use of lead from the clamp ammeters another meter measurement. When measuring the phase current of high voltage cable, the distance between the cable head and line should be above 300mm, and the insulation is good, which can be carried out when the measurement is convenient.
Q:Vc3266l digital caliper table phase sequence measurement
Alternating current measurement(1) function switch is put in A first gear.(2) clamping the head of the tested wire with a clamp head, adjusting the wire to be aligned with the clamp head vertically and being in the geometric center of the clamp head, and checking that the clamp head should be closed well.(3) at this point, the LCD readings are the AC current values to be measured.
Q:How can I measure the voltage and current with a clamp?
Clamp meter with digital display and pointer display, measuring about estimated range of the measured current, pay attention to the selection of range clamp meter, try to choose the appropriate range to reduce the error. In addition to the wire clamp in the middle of the jaw clamp meter, if the measured current is too small, can take the form of a plurality of winding wires, and then measure the value by the number of roots, but also take care not to measure the bare wire, so as to avoid the risk of electric shock. If we can measure the voltage clamp and other functions of the table, when measuring the current to pull out test. Furthermore, in the three-phase load, the line of the jaw clamp measures the current of the wire, and the two measuring current is the third. When measuring the current voltage clamp meter should note 1, the measured line is lower than the rated voltage of the current clamp meter; 2, measurement of high voltage transmission lines, to wear insulated gloves, wear insulated shoes, stood on the insulating pad; 3, to close not charged for jaw closing range; 4, in the measurement of resistance before the tested circuit must be completely discharged, and completely isolated from the power supply circuit; 5, if the test pen or power adapter to replace the damaged power, must have the same model and the same electrical specification test pen and power adapter; 6, the electric energy consumption as the battery indicator instructions, do not use instruments. If you don't use it for long time, remove the battery after storage; 7, not in high temperature, high humidity, flammable and explosive and electromagnetic field to store or use clamp meter; 8, please use a damp cloth or cleaner clamp meter shell, do not use friction or solvent; 9, the instrument when wet please, drying and storage.
Q:Clamp ammeters how to measure resistance, current, voltage
A multimeter and ordinary multimeter is not the same as lies in: as the current measurement to the meter in series in the circuit, so under normal circumstances, using ordinary multimeter to measure the current required power cut, multimeter or current meter, current transformer primary side connected in series in the circuit. Then power is measured, and a multimeter can measure the current power. A multimeter than the ordinary multimeter more than one meter, the meter is made according to the principle of the current transformer, specially used for measuring alternating current. Its working principle is as follows: a part of current meter measurement million by the current transformer and current measuring part composed of 000 table. The iron core of the mutual inductor is provided with a movable part and is connected with the handle. When the utility model is used, the movable iron core is opened by pressing the handle. The wires of the current to be measured are put into the jaw and the handle is closed to close the iron core.
Q:Clamp type meter use
Structure and principleClamp meter is essentially composed of a current transformer, a rectifier type clamp wrench and magnetoelectric force instrument.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range