Full Polished Glazed Porcelain Tile 600 YDL6AA536

Ref Price:
Loading Port:
Guangzhou
Payment Terms:
TT OR LC
Min Order Qty:
1267.2
Supply Capability:
100000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Brief Introduction

 

Full Polished Glazed Porcelain Tile 600 YDL6AA536 is one of the most popular color of Crystal Jade Serie, which is one serie of Polished Porcelain Tile in the present market. Just like other series, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.

Full glazed polished tiles are on the basis of the traditional polishing brick surface glazing and polishing products, whole set polished tile and glazed ceramic products archaize brick both advantages in one, not only glaze as smooth as polished tile brightening, like archaize brick pattern of design and color is rich, thick gorgeous color, natural texture, and the environmental protection and energy saving, service life long advantages and the low barriers to entry.


 

Product Features

 

  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

 

Product Specification 

 

  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.

 

Packing Information (For 27.5 Tons heavy 20’Fcl)

 

  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl

 

Production Line & Package 

 

Full Polished Glazed Porcelain Tile 600 YDL6AA536

Full Polished Glazed Porcelain Tile 600 YDL6AA536


 

 

FAQ

 

1.    For Polished Porcelain Tile, is the 30*60 available?

—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.

 

2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.

 

3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs. 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Where to get specialized tile?
Start by calling all of the roofing contractors in your local phone book and asking for them to come over and give you a free bid to match the existing tile ,if the roofing contractors know that they are competing for the job or sell of tile they are more likly to keep the price fair..
Q:Which type of roof is better in Florida? Shingle or Tile?
Tile will last much longer in the harsh sun of FL.
Q:to TILE or NOT to tile....?
I'm a huge fan of bathroom tile and I don't even have children but I'm putting it in my home. Bigger squares look much more modern than the older two color small squares do. Go with shiny white! Then the top half of the room can pop with as much color as you like!
Q:DIY mosaic tiling?
technically, tile isn't made to stick directly over formica. a form of underlayment is required, especially if trying to tile over a formica countertop. since this is just a table, and you are using small mosaic type tiles, the best thing for you to do is sand the finish off of the formica. a belt sander would be the easiest and best way, but if you don't have one or are afraid of powertools, some heavy grit sandpaper would do the trick, and LOTS of elbow grease. you're looking to take the finish and top layer off. use a white thinset, preferably a multiflex (available at home depot or lowes), to set your tiles with, as it is a better product than mastic, and if any of your mosaic tiles are made of glass, mastic won't even stick to them. then, wait for it to dry (24 hours) and grout with the color of your choice. good luck!
Q:Bai Peng tiles origin? how is it?
You have not provided the brand we have tested, to provide you with the method of selecting the tile, I hope to help you. 1 election origin Almost tiles on the market come from two places: Guangdong and Shandong. Guangdong brick overall quality is better than Shandong brick, domestic brands of ceramic tile origin is also generally from Guangdong, so a simple choice of Guangdong brick. (Shandong bricks are also good quality, but more need to blink of an eye). 2 to see flatness Flatness is very critical, if the flatness is very poor, it is difficult to shop in the edge of each tile are not the edge of the gap, there is not only the impact of visual effects affected, serious and even cause Ge (gè) feet. Figure tiles flatness is very poor gap is too large Method one: the same paragraph of the two tiles on the face of the table, his hands pinching side, observe the other side of the tilt, tilt the smaller, the higher the flatness. (This method is suitable for fully flattened bricks that do not apply to antique tiles and bricks with special craftsmanship)
Q:bamboo over vinyl tile?
Possibly. The vinyl tile must be well installed (not coming loose or bubbling or open seams, etc.). If the vinyl tile is a no wax or smooth surface, it may still need to be prepped with a palm sander and 80 grit just enough to give it some tooth. And finally, make certain to contact both manufacturers' reps or technical services to make certain that the new glue is compatible with both the vinyl and the bamboo... and to make certain that this endeavor will not void your warranty. Good luck.
Q:Tile Cost: Any way to get it wholesale/lower cost?
You ll have trouble finding a lot in a 24x 24 tile wholesale/retail or other wise. These are a more pricey tile since the size alone makes them hard to handle, transport and produce. Your chance are better off in a 16x16 or 18x18 tiles because of getting that many you can pallet pricing and get a discount. Unless you have a builders license your not supposed to be able to buy them wholesale but you can get a deal in that quantity through your mom and pop flooring places. You may be able to find a deal at your discount places, but a lot of that tile is close out and discontinued tiles which I don t recommend when getting that amount.( may not be able to get more should you need it.) GL
Q:how to measure the bathroom for tiles?
If your bathroom already had linoleum on the floor, just count the number there are. Start from the corner where your door is because you are going to have to cut some probably to go near your sink, and you do not want that showing on the opposite wall. I think they are usually 1 x 1 foot, and depending on how large your bathroom is (mine is small), it will probably only take one box of tiles. Get the kind that have paper on the back that you can pull off and just stick it down on the floor. That way, you do not have to mess with that glue stuff. It will stay stuck well if the floor is good and clean first.
Q:How do I repair this broken tile?
Sockies, this is actually an easy repair. The first responder suggested liquid nails. Don't even consider that. If you have a matching tile available, use that in lieu of trying to clean off the tile. First off, it looks like the tile came loose based the non-continuous thinset on the bottom of the tile. If that is the case (which is probably the cause), you want to fill in under the tile with thinset, so the entire area where the tile sets is filled solid from the sub-floor to approx. 1/8 below the bottom of the surrounding tiles. You should remove the existing thinset where the tile will set. You can do this with a brick or masonry chisel. If a little remains at the perimeter, that will be fine. Trying to remove all of it flush with the surrounding tiles may result in loosening additional tiles. You don't want that. Allow about 5-6 hours for that to set (harden) enough to set the tile. You don't make it flush because you will spread additional thinset on the underside of the tile to set it. Use a 3/8 notched trowel to spread the thinset on the entire surface of the bottom of the tile. Place the tile keeping an even spacing from the tile to the surrounding tiles You want the grout joints to be the same size all around. Press down over the entire surface of the tile to ensure it embeds completely and is flush with the surrounding tiles. Allow it to set overnight and remove any thinset that will impede the grout from obtaining 1/4 depth. It's not necessary to make the grout the full depth of the tile. It's imperative to remove any loose grout prior to grouting. That's it. I suggest buying thinset that comes in the bag that you mix with water. Don't make it too soupy when you mix it. The thinset and grout need to (what's called) slake during the mixing process. It simply means you mix it, allow it to set 5 minutes and remix it, and it's ready to use. The bag will have those instructions on the back.
Q:Newbie tiling question?
Get okorder.com/

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range