Full Electric Walkie Scissor Aerial Work Platform(hydraulic motor)-JCPT0807DC
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | Unit | JCPT0807DC |
Rated capacity | kg | 230 |
Extend platform Rated capacity | kg | 113 |
Max number of people | 2 | |
Max working height | mm | 7800 |
Max platform height | mm | 5800 |
Overall length | mm | 1860 |
Overall length (with outrigger) | mm | 1840 |
Overall width | mm | 760 |
Over height(rail unfold) | mm | 2160 |
Overall height(rail fold) | mm | 1840 |
Working platform size | mm | 1670×740 |
Platform extend size | mm | 900×740 |
Ground clearance(stowed) | mm | 90 |
Wheelbase | mm | 1380 |
Min turing radius(inside) | mm | 0 |
Min turing radius(outside) | mm | 1640 |
Drive motor | V/kw | 2/0.5 |
Lift motor | V/kw | 24/3 |
Drive speed(stowed) | km/h | 6 |
Drive speed(lifting) | km/h | 0.8 |
Raising/Falling speed | sec | 31/37 |
Battery | V/Ah | 4×6/210 |
Charger | V/A | 24/30 |
Maximum gradeability | % | 25 |
Max angle | 2-3 | |
Tyre | mm | 305×100 |
NW | kg | 1240 |
Standard Configuration
-Proportional controller
-Automatic pot hole protection system
-4x2 drive
-Emergency stop button
-Emergency descending button
-Horn
-Working chronometer
-Transport standard forklift hole
-Extended platform
-Charge protection
-Self-lock door
-Total excursion
-Tracelessness tyre
-Self-actuating brake system
-Oil pipe explosion protection system
-Fault diagnosis system
-Tilt protection
-Motor reset protect
-Buzzer
-Folded rail
-Strut bar for safe overhaul
Optional Configuration
-AC power source connected to platform
-Working lamp
-Rotary strobe light
-Overweight sensor
-Air scoop connected with platform
- Q:Which is good for mobile goods elevators?
- The design load of all mechanical and transmission equipment of the hoist is more than five times the actual load. It is a safe choice for you to go to jinan
- Q:What certificate is required to operate hydraulic platform
- Need special equipment to use the license, do this card is very expensive, seem to want 500 ~ 10000. Where did you buy it, because the house can do it for you? If the product does not meet technical review do not water,,,, I know there is a producers can do STH for sb, HuaNanJun industry machinery equipment co., LTD, special equipment to check more strictly, now,
- Q:Where do the elevator motors go?
- Abstract: the shear fork type electric elevator is a special equipment for high altitude operation. The it scissor mechanical structure, make the lifting platform lifting Has high stability, wide operating platform and high bearing capacity, make the work high above the range is bigger, and is suitable for many people work at the same time. It makes high-altitude work more efficient and safer. It is a special equipment for high-altitude operation. Characteristics: the lifting mechanism adopts high strength manganese steel. There is a safety protection device that prevents the elevator from overloading. Safety valve shall be set up to prevent rupture of hydraulic pipe. An emergency reduction device with a power failure. The product is suitable for high-altitude equipment installation, maintenance, etc. According to different requirements can choose different dynamic form (such as: three-phase ac power supply, single-phase ac power supply, dc power and diesel power, etc.), and with manual hydraulic equipment, can be in a power outage or lifting work as usual, no power supply and can add adjustable platform, can extend to the desired location on the length of the platform, so as to improve the work efficiency. It is the ideal of modern high building and equipment, which is necessary for the production of high-altitude safe civilization.
- Q:What should the chain's main elevator be aware of when installing the chain
- Based on many years of production installation experience, the following items should be noted in the installation: The rail type carries mesa thickness problem. According to the actual demand, adopt the most appropriate bearing mesa, some manufacturers in order to save costs by steel plate thickness is not appropriate, causing customers to use after a period of time, serious deformation mesa.
- Q:What are the elevating institutions
- Four-wheel mobile elevators and two rounds of traction elevator, car modification lift, storage battery lift, self-propelled elevator, lifting height range from 4 m to 18 m
- Q:The ball of the universal milling and lifting platform rolls off, how to install,
- Screw has a variety of forms, one of the most common is to use return and return two catheters, if not nut screw the screw will not drop the ball, if there is no turn the screw nut and fell out of the ball, that is to return or return pipe is broken, have to put on reload. Let me be specific. If there is no damage, then use the lithium base grease to keep the ball rolling in separate loops, and then turn the nut back in the way of the regular nut. The key is to start at the beginning, but once the ball comes out, it's going to come back again. Try it twice. (note the non-circular path (snails) don't let the ball drop!)
- Q:Description of fixed hydraulic elevator
- Main USES: installation maintenance, such as power line, lighting, elevated pipe, etc. Applies to can't work of the excavation pit, USES the chain wheel lift height, with a single break, double break, adopt effective guidance system, make the lifting platform in the process of translation and small gap with fixed bed, smooth operation, stepless speed change. The synchronizing device adopts low speed large torsional drive, which can be completely parallel, freely and retractable in the lifting process. The machine is stable and safe, suitable for the supermarket, hospital, restaurant, shop and so on.
- Q:There is no easy way to push the goods when the platform is loaded.
- There are several rollers or balls on the workbench that can move from above, not knowing what you are doing. If necessary, a friend can leave a message.
- Q:How do you remove the horizontal universal elevator milling cutter
- When the milling cutter is removed from the vertical milling machine, the lever nut must be released and then the end of the rod is gently tapped. ; You should not release too much, as long as you have some loose space. When you release too much, the thread connecting the rod and the milling cutter is too short, and when you tap, you slip and even drop the knife.
- Q:When the hydraulic platform drops, it feels very shaken and unbalanced. Please answer?
- Connected to the solenoid valve is the control valve core, if it is to be repaired. To change oil, you need to lift it up to the top, and then use the safety support frame or stick to support it so that you can do what you want
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Full Electric Walkie Scissor Aerial Work Platform(hydraulic motor)-JCPT0807DC
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords