Q:Led display point density is what it means

LED display density refers to the LED display per square display the number of pixels, such as P10 model LED display is 10,000 pixels per square point, P16 model refers to the display refers to 3906 pixels per square point.

Q:Led display and led lighting What is the difference?

Application areas are different. Led display mainly in: government square, leisure square, bustling business center, advertising information release card, commercial street, railway station, sports venues (UNILUMIN Universiade) and so on. Led lighting is mainly home, mall, roads and other lighting

Q:How do I choose the dot pitch of the LED display?

LED display: LED light: according to the color of the lamp is divided into red, green and blue three primary colors; unit board, module; according to the pixel spacing is divided into ph10, ph16, ph20, ph40 and other series, the minimum point spacing 5mm, maximum 50mm;

Q:LED display how to install it?

LED display according to the application of different areas, divided into a variety of installation methods, there are: fixed installation, rental hoisting, stadium fence installation.

Q:LED display applications are what

Mail, shopping malls and other services in the field of business publicity and information display, advertising media, new products, performances and meetings, exhibitions, LED display large screen as an exhibition organizer to provide one of the important services, indoor large-screen TV applications

Q:Led display speed how to tune

All need to display the data are ready, the "send" button to send data, select the need to send the frame and set the starting address, the point can be sent

Q:LED display a board dark light how is it?

Measure the power supply module voltage low, adjust the fine-tuning (power module close to the indicator light at the fine) to make the voltage to the standard.

Q:Led display brightness is not enough because of what are the reasons

Display screen software which can adjust the brightness of the display. If you use the time for a long time, there are reasons for light failure, it is recommended to consider replacement

Q:IPS screen and LED screen difference

LED is the light-emitting diode, so the so-called LED screen is the concept of confusion, in fact, LCD panel with LED as a backlight, but also useful as a backlight CCFL, CCFL is cold cathode fluorescent tube,

Q:LED display power can not be displayed properly

Check and confirm that the serial cable used to connect the controller is loose or off. (If the black during the loading process, it is likely that because of this cause, that is, during the communication process due to loose communication line and interrupted, so the screen black. Do not think that the display body is not moving, the line can not be loose, please It is important to check the problem quickly.