FRP tanks and vessels High mechanical inertness with harmless of different styles
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
INSTRUCTION
FRP tanks and vessels can be largely used in many areas of the light industry, petroleum, chemical, food brewing, transportation and so on. Such product can resist the corrosion of various acids, alkalis and salts.
CHARACTERISTICS
• High mechanical strength
• High mechanical inertness
• Resistance to weathering
• Low thermal and electrical conductivity
• Long Life
• Non-toxicity
• No need for maintenance
• Light weight
DESIGN PHILOSOPHY
The correct structuring of any kind of G.R.P. tank consist of three distinct types of layers:
• Chemical Resistant Layer
• Mechanically Resistant Layer
• Outer Protective Layer
OTHER DESIGN CONDITIONS
• Working pressure, Vacuum
• Support span
• Working temperature
CHEMICAL RESISTANCE
Resistance to corrosion in aggressive environments is one of
the primary reasons for specifying GRP tanks. These, resists a
wide range of chemicals and temperatures and can be built to
provide additional abrasion, weathering and fire resistance. The
chemical resistance of GRP tank depends primarily on the resin/
glass matrix used. Other factors can affect laminate resistance
including liner construction, cure, and fabrication methodology
and installation techniques.
General corrosion, galvanic, aerobic, pitting, dezincification,
graphitic and intergranular corrosion harm metals but not GRP.
PRODUCTION RANGE
FRP small-scale storage tank: Diameter ≤ 4M
Large-scale jobsite winding vertical storage tank: Diameter 4200mm-25000mm
EXECUTIVE STANDARD
FRP small-scale storage tank
JC/T587-1995 (Glass fiber reinforced plastic storage tank)
Large-scale storage tank
HG/T3983-2007 Industry standards of Chemical Corrosion-resistant jobsite Winding FRP Large-scale storage tank
HG/T20696 Design Requirements of FRP Chemical Equipment
COMPANY INTRODUCTION
CNBM, China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products, professional service and complete solution to our customers. Strong delivery capacity, advanced technology
& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PICTURE S
- Q:Difference between glass fiber reinforced plastic and insulating board
- (1) FRP tanks: FRP tanks, hydrochloric acid tanks, sulfuric acid tanks, reaction tanks, anti-corrosion tanks, chemical storage tanks, transport tanks, food cans, fire cans, etc.;(2) glass fibre reinforced plastic pipe: glass fibre reinforced plastic pipe, glass fibre reinforced plastic sand pipe, glass fibre reinforced plastic wind pipe, glass fibre reinforced plastic cable tube, glass fibre reinforced plastic pipe jacking, glass fiber reinforced plastic pipe, etc.;
- Q:What are the maintenance methods of FRP tanks?
- FRP tanks have two molding methods: 1. hand paste molding, resin glass cloth, hand paste molding.
- Q:20 cubic meter FRP double deck tank price
- But now, the production of this kind of glass double deck oil storage tank rarely, we oil in a short listed, called what type 3DFF, but listen to brother units say, construction is very quick, very convenient.
- Q:What are the manufacturing processes of FRP tanks?
- The lining has the skeleton and the airtight function, is a part of the finished product. When designing the lining, pay attention to the sufficient strength and rigidity. The thickness of the inner layer is more than 3mm (see Table 1), and the resin content is greater than 80%. The corrosion resistant surface felt, short cut felt and cloth handle paste can be used for making the inner layer. Its production process is roughly as follows: mold making, mold, tank head hand paste glass fiber products, after curing, stripping adhesive, bonding head, air nozzle test, grinding, repairing, too. For the qualified lining lining molding, using two type sealing and simplified one and head connecting two. Thus, it is easier to produce a qualified lining and increase productivity than a three end combination of a sealed tail, a simplified type and a head. The key to making the qualified lining is the connection between the head and the cylinder. The head and the cylinder should be made of socket joint, because the plug joint has the advantages of high strength of joint, good performance of internal pressure, uneasy leakage and convenient assembly. As long as the socket structure is reasonable, it will not leak after use. The bonding joint depends on the resin cement and the outer FRP reinforcement. Wherein, the daub is applied between the socket and the socket and plays the first line of defense. It is made up of resin and filler, and resin has the function of adhesion and seepage prevention. It requires good toughness and higher adhesion, so epoxy resin should be used as daub. After the first line of defense, the seepage prevention mainly depends on the FRP reinforced layer. The layer consists of fiberglass products and resins. Among them, glass fiber products such as blankets and cloth between the fiber gap, can not be impermeable, can only play a strengthening role.
- Q:How long is the service life of FRP tanks?
- Glass fiber reinforced plastic storage tank is a kind of non-metal composite tank made of resin and glass fiber by computer controlled machine winding. The service life of mechanical winding FRP tanks normal for 8 to 15 years, and the length of the service life of the products, the quality of the installation base, the storage of chemical properties, content, standard operation has a very important relationship.
- Q:What are the characteristics of FRP softened water tank?
- Long service life. A stamping molding plate (3-4 times stamping plate bearing capacity of ordinary plate).
- Q:How much can glass steel cans do?
- Water glass steel tank of the outer winding layer is lined with glass fiber, PE/FRP, maximum test pressure is 150PSI, the maximum working pressure is 100PSI, the working temperature is 1-49 degrees, the maximum degree of vacuum is 5 "Hg (127mm Hg).
- Q:What matters should be paid attention to when cleaning and maintaining FRP tanks?
- To prevent the equipment from hitting the tank wall, use a ladder, metal pieces equal to the tank wall contact part, add soft pad to protect the inner wall from being split and bruised.
- Q:How long is the normal service life of FRP cans? How long will it take if I use it in harsh conditions?
- The quality of the resin will directly affect the service life of your product, and the specific environmental factors need to be analyzed in detail. Suggest you contact specific supplier, put forward your requirement, just can provide the product that you need according to your requirement
- Q:Glass fiber (resin) storage tank for hydrochloric acid, how many years of service, please list the basis, thank you!
- According to the use of resin and hydrochloric acid concentration and temperature are different, 30% concentration 100 DEG C can be used for a long time, more than 25 years
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FRP tanks and vessels High mechanical inertness with harmless of different styles
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3 m.t.
- Supply Capability:
- 50000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords