FRP Process Pipe/Industrial Fiberglass FRP Pipe

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 m
Supply Capability:
10000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

FRP pipe 
1.High impact resistance 
2.Corrosion resistance, FRP pipe 
3.low temperature resistance, FRP pipe 
4.ISO 

FRP GRP pipe:

 

Characteristic: 

— Light weight, high strength, and convenient transportation and installation.
— Excellent corrosion resistant, it can be used under the condition of seawater environment for long time.
— Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time.
— Smooth inner surface, its roughness coefficient is 0.0084, good conveying, and no fouling, no secondary pollution, decrease the cost of the running & maintenance.
— Fire retardant, it meets IMOA.753(18) Level-3 fire resistance class.

 

Specification:

—Diameter:DN25~DN4000
—Pressure:0.25Mpa~2.5Mpa
—Temperature:-45°C~120°C
—Length of single pipe: DN<250 ,L=6m ;DN≥12m ;the length can also be made according to the requirement of the user.

 

Connection way:
Connection way can adopt screw connection, spigot and socket connection, flange connection, plain end butt connection, sleeve connection, etc connection way.

 

Application: 
FRP pipe can be used for every kind of pipeline system of ocean engineering and ship, such as: fire protection water supply system, brine water supply pipeline, cooling water, potable water pipeline, process pipeline, ballast piping, lio loading & unloading pipeline, ship’s bottom sewage pipeline, sprinkler system, freshwater pipeline, sanitation water supply pipeline, board water drainage pipeline, depth-measuring pipe, vent pipeline, water drainage pipe and cable protection pipe etc.

FRP Process Pipe/Industrial Fiberglass FRP Pipe

FRP Process Pipe/Industrial Fiberglass FRP Pipe

FRP Process Pipe/Industrial Fiberglass FRP Pipe

FRP Process Pipe/Industrial Fiberglass FRP Pipe


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe? What kind of material is good?
Other fields such as chemical industry, the product is relatively high, generally aerial or ground, even if there is high pressure, bad high risk, so even high stiffness is thicker instead of sand, in general, not afraid of high investment, the use of pure glass tube, don't use the sand tube.
Q:FRP duct material plan is how to mention?
Process design according to user's requirements and choose what material to use. Then according to the drawings and process, calculate the amount of various materials. According to the delivery date and production schedule, you can write the material schedule.
Q:How is FRP ventilation pipe made?
Coating moldingOn the surface of the mold, a transparent glass paper is fixed on the surface of the bread. When it is fixed, it is coated with a resin coating which has been adjusted. It should be even and not exposed. Then apply a layer of glass cloth and then coat with a resin coating. Each coated with a layer of resin is deposited a layer of glass cloth. The cloth lap to stagger and scraping, the outermost layer of ruibu glass surface should be coated with a layer of resin coating. After reaching the required thickness, and then deposited on the outer surface of the glass paper flatten the light pressure.
Q:Who knows, how is the glass reinforced septic tank connected with the municipal pipe?
Septic tank (Hu, F, NCH) is the treatment of nightsoil and to filter precipitation equipment. The principle is that the cured material decomposes at the bottom of the tank, and the upper hydration object flows into the pipeline to prevent the pipe from clogging and has enough time to hydrolyze the solidified object (such as excrement and urine). Tank (septic) refers to the division of living sewage sludge, and anaerobic digestion of sludge structure of small structures.
Q:Raw material and mix ratio of inorganic glass fibre reinforced plastic wind pipe
In order to improve the quality of glass.Advanced technology may be used.The ratio seems to be 1 to 0.001. Pretty much within this range.
Q:Where are the advantages of FRP pipes? Long life?
AntifoulingThe pipe surface using unsaturated polyester resin, so the surface is clean and smooth, not by sea or sewage in a shell, fungi and other microbial contamination of borers, so increasing roughness, reduce cross section, increase maintenance costs. No such pollution, long-term use clean as before.
Q:Glass fiber reinforced plastic pipeline to do anti-corrosion?
Glass fiber reinforced plastic itself belongs to a kind of anticorrosive material, and usually needs no antiseptic treatment. However, mainly depends on the environment and requirements.
Q:What is the compressive strength of all kinds of FRP materials?
Anti fouling and anti moth: unsaturated polyester resin surface clean and smooth, will not be ocean or sewage in the shellfish, fungi and other microorganisms stained, moth, so as to increase roughness, reduce water cross section, increase maintenance costs. FRP pipes are free from these pollution and are clean for a long time. At the same time, because of its smooth inner wall and excellent corrosion resistance, it will not cause scale and microbial growth, effectively guarantee water quality and maintain the stability of water resistance. But the traditional pipe still exist after water resistance increases and the surface fouling phenomenon.
Q:Glass tube has different diameters with different prices. Who can elaborate?
The standard for FRP pipe execution is GB21238-2007
Q:FRP pipe price
FRP prices are calculated in terms of material length and nozzle diameter.FRP duct price is: 3mm specifications 66 yuan / square meter, 4mm specifications 88 yuan / square meter, 5mm specifications 110 yuan / square meter, 6mm specifications 130 yuan / square meter, 7mm specifications 150 yuan / square meter

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range