FRP Pipe Factory Direct, Wholesale DN200, DN300, DN500 Fiberglass Pipe

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
20 m.t.
Supply Capability:
1000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1. Structure of FRP Process Pipe Description


Good corrosion resistance, no effect on water quality. FRP pipe can resist acid, alkali, salt, water, untreated sewage, corrosive soil or groundwater, and many chemical fluid erosion. 


At a 30 ℃ state, FRP pipe still has good toughness and high strength, at a 50 ℃ - 80 ℃ in the range of long-term use, the use of specially formulated resin also at least 11O ℃ temperature, and working.


2. Main Features of FRP Process Pipe


Produced using filament winding,Fiberglass Reinforced Plastic, their proportion in the 1.65-2.0, only 1/4 of the steel, but the ring to the tensile strength of the glass tube is 180 - 300MPa, axial tensile strength of 60 - 15OMPa, approximate alloy steel.


FRP pipe is non-conductor, insulation resistance at 1012 - 1015 Ω • cm, best adapted for use in power transmission, telecommunication lines and more densely populated areas mined; FRP pipe heat transfer coefficient is very small, only 0.23, a 5 ‰ steel. 


3. FRP Process Pipe Images


FRP Pipe Factory Direct, Wholesale DN200, DN300, DN500 Fiberglass Pipe

FRP Pipe Factory Direct, Wholesale DN200, DN300, DN500 Fiberglass Pipe

FRP Pipe Factory Direct, Wholesale DN200, DN300, DN500 Fiberglass Pipe


4. FRP Process Pipe Specification


1)Small specific gravity, light weight: FRP pipe’s specific gravity is 1.65-2.0 and one 1/4 compared with steel; hoop flexible tensile strength for FRP pipe is 150-420 MPa and axis tensile strength is 60-150MPa, similar to alloy steel. FRP pipe’s strength/specific gravity is 2 or 3 times compared with alloy steel so it can be designed according to customers different requirements for various pips bearing inside and outside pressure. For the same diameter pipe, FRP pipe’s weight is 1/2.5 compared with carbon steel pipe, 1/3.5 compared with cast iron pip, 1/8 compared with reinforced concrete pipe, so it’s easy for construction and transporting.

2) Fewer joints and efficient installment: Usual pipe’s length is 4-12 meters(other special length is also available according to customer demands). Single pipe is long with few joints to accelerate installment speed and reduce the fault possibility then improve efficiency of quality of construction of whole pipe.


5. FAQ of FRP Process Pipe


We have organized several common questions for our clients,may help you sincerely:


①How about your company?

One of the leading manufacturers and suppliers specializing in FRP pipe products in China. The integrated sales & service ensures customers with various demands an easier access for purchasing management.


②How to guarantee the quality of the products?

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.


③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Can FRP pipes be used in heating pipes?
FRP pipes are generally not used in heating pipes, because the use temperature of FRP pipes is limited, as detailed below:1. universal unsaturated polyester FRP can only be used for less than or equal to 60 degrees (HG/T20696-1999)2. bisphenol A unsaturated polyester FRP can only be used for less than or equal to 100 degrees HG/T20696-1999)3. vinyl unsaturated polyester glass fiber can only be used for less than or equal to 120 degrees HG/T20696-1999)4. epoxy FRP can be used for less than or equal to 90 degrees HG/T20696-1999)5. glass fiber reinforced plastic sand holding pipes can only be used for less than or equal to 50 degrees (GB/T21238-2007)
Q:FRP acceptance standard
As the glass pipe between the use of socket type, double "O" type sealing ring connection, so each installation of a pipe, it is necessary to bear in the socket to suppress, in order to detect double "O" type sealing ring sealing effect. The pressure test pump passes directly through the test hole on the top of the pipe. The water pressure of the pipeline working pressure of 1.5 times after the pump stops (during the operation to open the drain valve exhaust), observation of 2min, the pressure drop value does not exceed the test pressure and the nozzle 5%, no leakage, nozzle pressure test is qualified. If the pressure drop is faster, the sealing effect is poor and needs to be reinstalled to ensure the overall pressure test of the FRP piping system is successful.
Q:What's the price of fiberglass reinforced sand pipes?
Specifications: DN100--DN4000 are available.Thickness: 5mm--20mm, bothQ:28O5--9I343I/ I86+O38I+2OO7
Q:What are the standards for FRP pipes?
To install FRP pipes, first check the radial deflection of the GRP pipe. In accordance with the requirements of the specification, the FRP pipe shall be tested within 24 hours after the completion of the installation to test whether the initial radial deflection of the pipe installed is deformed and whether the pipe has occurred in the case of bulge, flat and other mutations.
Q:What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe? What kind of material is good?
There are two main functions of glass fiber reinforced plastic sand adding, one is to improve the rigidity, the other is to reduce the cost. These two aspects just agree with the municipal, the dosage is large, the pressure is low, and the underground and maintenance are few.
Q:Slurry circulation glass fiber reinforced plastic pipe
The slurry circulation FRP pipe project has long service life and is safe and reliable. The pipeline is durable and the safety factor is above 6. The pipeline life can reach up to 50 - 100 years. For example, the water supply pipeline from Shenzhen to Hongkong was built on the side of Hongkong, long 50KM, respectively, two kinds of glass pipes with inner diameter, 2.2m and 1.7m, which were installed and used so far in 1965, and they were left intact.
Q:What is the structure and function of glass fiber reinforced plastic lining?
Repeat the process of brushing and sticking, forming three cloth, four glue or four cloth, five glue process, according to the corrosive strength of the medium, the thickness of the glass fiber reinforced plastic lining layer is different, and the price is different.FRP lining is slightly cheaper than rubber lining, but the price is only about 30% of the latter
Q:What can be done to solve the leakage of FRP pipe?
If you can't get into the pipe, polish it from the outside and polish it to the lining. Then make a new lining, and then use a cloth to reinforce the structure.
Q:How is the glass reinforced septic tank and the cement drain pipe connected?
PE bellows is good, and now they are so connected.
Q:What's the process of continuous winding glass fiber reinforced plastic sand pipe?
(1) die: the continuous flat steel supported by the reel, winding to form a round mandrel.(2) feeding: when the mandrel moves, advanced packing, glass fiber, resin and surface material are accurately placed under the control of program control (PLC) and microcomputer (PC).(3) monitoring: according to the prepared material input program, only the basic pipeline data can be input; the computer can calculate the mechanical operation settings by itself. Material consumption, pipe thickness and so on will be constantly monitored and recorded.(4) curing: induction heating of the curing process of the product is accomplished by the flat band and the infrared device which is directly heated in the product. The temperature of 20 different parts of the product in the curing zone will be measured and displayed in the form of an image on the computer screen.(5) cutting and trimming: the pipe can be cut from 0.3 meters to 18 meters under the predetermined length. The cutting, chamfering and caliber measurement are coordinated with the longitudinal movement of the product to ensure the accurate vertical cutting of the glass fibre reinforced plastic pipe and the killing of the outer diameter.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range