FRP/GRP PIPE in water transportation Area
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
mateiral and technics:
fiber glass colth,resin,quartz sand, continous fiber glass widing with skill manufacture
features:
1)corrossive resistant
2)light weight,high intensity.,long service life
3)low installation and mainence costs
4)design flexibility and short period of model-changing
5)widely used in kinds of areas
application
1)drinking water transmiting
2)sewage pipeline,rainwater pipelin
3)angricultural irrigation
4)seawater desalination system
5) other kinds of liquid transmiting
6)municipal engineering construction
specification
1)DN100-4000
2)Pressure class: 0.1MPa0.6MPa1.0MPa1.6MPa2.0MPa2.5MPa
3) stiffness class SN1250SN2500SN5000SN10000
4) length:6m,12m
Qualification Testing
Strain corrosion Testing
Hydrostatic Design Basis
Joint Testing
Initial Ring Deflection
Long-Term Ring Bending
Potable water Approvals
Control Testing
Raw materials
Physical properties
Finished pipe:visual inspection,barcol hardness,wall thickness,section length, diameter,hydrostatic leak tightness test to 1.5rated pressure
- Q:Which is better, pultruded FRP square pipe with PVC?
- When abrasive materials are transported in the wear-resistant pipes (such as ash, coal dust, ore fines, etc.), there is a problem of rapid wear and tear of the wear-resistant pipes, especially the rapid wear of the bent pipe.
- Q:Are there any differences between FRP pipes and FRP pipes?
- Air duct is a pipe system used for air transportation and distribution. There are two kinds of composite air duct and inorganic air duct. The duct can be classified according to the shape and material of the section. Duct made of stainless steel duct, in the bite mouth, rivet joint, flange, four corners and other cracks painted with sealant (such as neutral glass glue). Surface dust and grease shall be removed before applying sealant. According to the section shape, the wind pipe can be divided into circular duct, rectangular duct, a variety of flat air pipe, wherein the circular duct resistance minimum maximum height, making complex. Therefore, the application of rectangular wind tube based. According to the material, the air duct can be divided into metal wind pipe, composite air pipe and macromolecule air pipe.
- Q:Is it useful to make gas pipelines with glass steel pipes? Or the idea that the technology is mature?
- Now the general use of steel pipe with PE pipe is very good, I don't FRP clearance, but there may be enamel can also withstand the pressure vessel, 3 class.
- Q:Glass fiber reinforced plastic sand pipe backfill 5m, how much kg pressure?
- These two parameters are based on the need and the actual geological situation to determine, not a backfill a few meters can be determined.
- Q:What are the differences between FRP pipes and sand pipes in their uses?
- Pressure more than 10 kg, generally do not clamp sand tube. Process tubes are mainly used in highly corrosive workplaces such as acids, alkalis, salt solutions, or high pressure pipes.
- Q:How much is a glass fiber reinforced plastic sand pipe socket pipe fitting?
- Glass reinforced plastic sand pipe can increase rigidity by adding sand layer to the middle layer of pipe wall, which can meet any reasonable rigidity requirement of users. Another advantage of gfrpmp stiffness is bending deformation ability is very strong, for example, glass steel 5000Pa stiffness of sand in deformation of 20% cases, no delamination damage, and after unloading can restore the concrete pipe due to large deformation may be unable to bear have broken gfrpmp ring 150MPa ~ to the apparent flexural strength 450MPa, tensile and compressive and flexural strength of the concrete pipe were borne by steel and concrete, the apparent flexural strength is still far below the gfrpmp, only 8.5% ~ gfrpmp 26%. Generally, the service life of the drained glass fiber reinforced plastic sand pipe can be more than 50 years, and it is more than 2 times that of reinforced concrete pipes and other drainage pipes.
- Q:What are the disadvantages of glass fiber reinforced sand pipe?
- Not agree with the recommended answer, the same thickness of glass fiber reinforced plastic sand pipe and process tube, process tube stiffness is not low (can be calculated). The effect of sand inclusion is mainly to reduce the cost.
- Q:What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe?
- Glass reinforced plastic sand pipe is actually in the production of glass fiber reinforced plastic pipe, in the middle to increase a layer of sand layer, the purpose is to increase the rigidity of the pipeline. The pipeline in the design according to the use of pressure, stiffness and other conditions to determine the need for sand, if the thickness of the pipe can satisfy the pressure requirements and can meet the requirement of stiffness, is generally not the sand.
- Q:Glass fiber reinforced plastic pipeline to do anti-corrosion?
- Glass steel pipe does not need to do anti-corrosion treatment, the material itself is the biggest advantage of corrosion resistance
- Q:How to improve the compressive strength of waste glass fiber reinforced plastic profiles (such as square tubes) should be started with resin, curing agent, glass fiber or other aspects!
- Ensure the solidification of glass steel products in a reasonable range, in general, glass fibre reinforced epoxy resin material curing degree if the use of amine curing agent, the best curing degree in the range of 135 degrees --150 degrees, polyester resin, Mohs hardness of about 60 is OK.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FRP/GRP PIPE in water transportation Area
- Loading Port:
- Lianyungang
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords