Detailed Product Description
Fresnel light, spot light
Voltage: AC-110V OR AC-220V.
Studio spotlight is the main light for new broadcast. Proscenium and studio. The shell is made in high quality aluminum. The light way is reasonable. It is light weight and elegant, and the lighting high is equal. It could light big area in photography, and also could be special light for special photography, and it also could be used to light the figure and stage property in stage or studio.
1. Fixing the Spotlight on the light stand or Ceiling track, loosen.
2. The screws by the sides of U shape stand. The angle of Fluorescent light can be adjusted.
3. Turn on the main power, and related light tube you need, then make the shoot.
4. While turn on the light, should avoid the light’s body vibrated, in order to prevent damage the bulb, then make the shoot.
1. Caution: high temperature, no touch.
2. Please use the power supply with good ground connection.
3. please donot use under Moistness, Cold or Hot environment.
4. Cut off the power supply after using, and put the light in dry place.
5. There is high-voltage power inside the light, so it need dismantle by professional staff.
6. When the light on working please do not touch the tube or see the tube directly.
7. When the light have problems or become damp, it need exam and repair by professional staff then can put in use again.
- Q:Where can I find a Star Projector in Linyi?
- A lot of places, you can go to some jewelry stores such as seven or female a few to see, or to buy a Taobao.
- Q:The whiteboard projection light doesn't turn on, the alarm light and the power indicator red light at the same time
- Your problem should be the bulb fault of the projector. Recommend you change the emperor's projector and electronic whiteboard, service life will be 2 to 3 times longer than the average length
- Q:Where can I get the star projection lamp in Shanghai? It's better to get there on the subway
- Subway? Go to Xujiahui, the Pacific Digital Bainaohui. Let's see.
- Q:Is the projection light connected to the computer's pattern?
- Is connected to the computer, there are not connected to the computer, but currently on the market there are many special patterns fit into a lamp inside the cast out effect.
- Q:Which scene is suitable for advertising projection lamp?
- First media China has mentioned a concept - attention, which is where the user has to look. For example, the corridor corridor, the light is dark, no other advertising grab the audience's attention, this time advertising content is passed by everyone must see, and will remember.
- Q:Can translucent light screen be used as projection cloth?
- Pattern LOGO projection lamp. It is suitable for the exhibition of Museum Exhibition Gallery Exhibition 2002 - shaped collector performance and shape brand marketing, PUB, KTV, Cara OK, coffee shops, department stores and other advertising market atmosphere will leave people make a special impression, due to the replacement of advertising only need to change the pattern piece without the traditional Poster Sign Making for a long time the price is expensive, the product saves time and money;
- Q:There is a projection lamp, thrown to the ground,
- It uses advanced computer vision technology and projection display technology to create a magical, dynamic interactive experience, the system can produce a variety of special effects at your feet.
- Q:What are the problems that should be noticed in installing the projection lamp wiring?
- Generally speaking, the installation of a projector does not mean that you can immediately begin to appreciate your favorite movie. In order to achieve better results, we must also adjust it. The first thing the computer resolution adjustment, the longest resolution is 1024 * 768, if you choose the projector in support of the 1024 * 768 resolution, basically do not need to adjust, but if you use to support a maximum resolution of 800 x 600, but the computer resolution is 1024 * 768 or even higher, in in this case the projector will automatically use the compression function to display the image, we can see the normal image, but the picture display quality is greatly reduced. Therefore, the resolution of the video source is set according to the resolution supported by the projector to match each other to obtain the best effect. Then the image projected onto the wall or curtain, a mobile projector to project an image into the correct position, and adjust the projector lens focusing knob on the line, while the image projection image to fill the entire screen. If the image is trapezoidal or parallelogram, then it can also be adjusted with the help of the built-in keystone correction function. Before using the technique 1. Before setting up the projector power, you need to confirm the normal connection of the projector cable and make sure that the video source has been properly output. After you complete the projection connection and turn on the projector, you also need to switch the output mode. Because there are three ways to output the projector, you can hold the Win logo key at the same time and press the F5 key (when you connect to the laptop, press the Fn key and the F8 key) to select the right screen output mode.
- Q:How do you do routine maintenance of projection bulb?
- Prevent repeated movementIn the projection process, we will definitely encounter the condition of adjusting the projection azimuth. At this time, many people will adopt the direct movement method to adjust to the appropriate position. But what we're going to tell us here is that it wasWhen the light bulb is in use, the temperature will be very high. At the moment, the filament inside the bulb is usually operated in semi molten condition. If the projection is moving frequently at this time, it will probably harm the projection bulb. Thus advocated,If it is placed in the projection, when we use the two or three best can be placed in position to determine the projection, such as non special conditions, we must prevent the move, so every time not only easy to use, but also reduce the direct harm to the projection.The projection bulb replacement / installation method is very elegantWhen the projection lamp needs replacement, we should immediately check the projector containing instructions, ensure the protection and replacement steps accurately; at the same time, buy the bulb, we also recognize that what the common type and the projector bulb can compatible, which is not compatible, if the selected fault type and may burn lighting, projection the lamp and projector.All objects on so precious, we usually use the best care treatment, carefully protected, it means only a maximum limit, extending life saving bulbs.
- Q:Four seasons star projection lights assembled,
- Yes, there's a plastic film. It's easy. Take a film on the edge, all torn down.
"Quality First, Client Utmost" is our philosophy. Our company is dedicated to supplying you with innovative products. We welcome your inquiries. If you are interested in our products, please feel free to contact us for friendly business cooperation.
Superior quality, attractive designs, favorable prices and timely delivery are our main advantages. We also make products as per clients' requirements.
1. Manufacturer Overview
|Annual Output Value
||North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Mid East; Eastern Asia; Western Europe; Central America; Northern Europe; Southern Europe; South Asia; Domestic Market
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||91% - 100%
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range