Frequency Inverter mn series 220v 3.7kw high proformance

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
1 kg
Supply Capability:
3000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


SVF-M mini vector variable frequency drive for water pump

 

Technical Specification

Control Characteristics

Control Mode

SPWM (Sinusoidal Pulse Width Modulation) control (V/F sensorless vector control)

Freq. Setting Resolution

0.1Hz

Output Freq. Resolution

0.1Hz

Torque Characteristics

Including the auto-torque, auto-slip compensation, starting torque can be 150% at 5.0Hz

Overload Endurance

150% of rated current for 1 minute

Skip Frequency

Three zones, settings range 0.1~400Hz

Acc/Dec Time

0.1~600s (Independent settings)

V/F Curve

Arbitrary V/F curve setting

Stall Prevention Threshold Frequency Setting

20~200%, Setting of Rated Current

DC Injection Braking

Operation frequency 0.01~60Hz, output 0~100% rated current, start time 0~5s, stop time 0~25s

Braking Torque

Approx. 20% (up to 125% possible with option brake resistor or brake unit externally mounted)

Operating Characteristics

Frequency Setting



External Signal

Potentiometer 5kΩ/0.5W 0~+10VDC, 4~20mA, interface RS485; Multi-function Inputs (7 steps, Jog, Up/Down)

Operation Setting Signal

Keypad

Set by RUN, STOP

External Signal

S0~S5 can be combined to offer various modes of operation, RS485 serial interface (MODBUS)

Multi-function input signal

Multi-step selection 0 to 7, Acc/Dec inhibit, two Acc/Dec switches, External Counter, Jog, PLC operation, External Base Block, auxiliary motor protection, auxiliary motor control is invalid, drive reset, UP/DOWN key settings

Multi-function output signal

AC drive operating, frequency attained, zero speed, PLC operation, counter attained, over torque, base block, operation mode, fault indication, drive is ready, overheat alarm, emergency stop

Analog output signal

Indicate output frequency, current, voltage, frequency command, speed, power factor output signal

Alarm Output Contact

Drive is fault, the contact will be ON

(One form C contact or 3 open collector outputs)

Operation Functions

AVR, over-voltage, over-current stall prevention, 3 fault records, reverse inhibition, momentary power loss restart, DC injection braking, auto torque compensation, slip compensation, S-curve, auto tuning, adjustable carrier frequency, frequency limits, parameters reset, vector control, PID feedback control, external counter, PLC, MODBUS communication, abnormal reset, abnormal restart, digital frequency output, sleep/revival function, 1st/2nd frequency source selections

Protection Functions

Over voltage, over current, under voltage, external fault, overload, contact protection, overheating, electronic thermal, ground fault

Display Keypads

6-key, 4-digit, 7-segment LED, 4 status LED, master frequency, output frequency, output current, custom units, parameter values for setup, review and faults, RUN, STOP, RESET, FWD/REV

Built-in brake chopper

Built-in for all models

Environment Condition

Protection threshold

IP20

Pollution Degree

2

Installation location

Altitude 1000m or lower, keep from corrosive gasses, liquid and dust

Ambient temperature

-10°C~50°C non-condensing and not frozen (-10°C~40°C for above 5.5KW)

Storage/Transportation temperature

-20°C~60°C

Ambient humidity

Below 90%RH (non-condensing)

Vibration

9.80665m2(1G) less than 20Hz; 5.88m/s2(0.6G) at 20 to 50Hz

Approvals


 

Technical Parameter

 

  

VFD Capacity

Input Voltage (V)

Power Capacity (KVA)

Input Current (A)

Output Current (A)

Adapter Motor(KW)

3.7S/T2B

3 Phase 230V

5.9

19.6

18

3.7

 

 Model Size

 

VFD Model

W1

H1

W

D

H

Installation Aperture  

Weight (Kg)

SVF-MN3.7S/T2B

110.0

205

125

166

220


3.2

 

 


Accessories

 

 

Company Introduction                         

 

 

 

Shandong Chinsc Electric Technology Co., Ltd. is a manufacturer of professional inverters integrating research and development, production and sales. With advanced technologies, excellent quality, scientific management and perfect services, we are building a first-class inverter manufacturer gradually.

 

Currently, our company has introduced CHINSC inverter models such as SVF3000 series, SVF-M series, SVF-EV series, SVF-G7 Series 0.4 ~ 630KW, to the markets. With excellent product quality, excellent technology development capabilities and comprehensive after-sales services, CHINSC inverters have won praise among agents and customers across the country.


 




Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is the laptop power adapter hot?
Third, the power of the nominal voltage than my books the battery voltage is much higher, not an accident, right? First of all, to know is that the power supply to the books and the battery power supply to the notebook is different. Battery-powered, the battery output is pure DC, very clean, the battery voltage is neither possible nor need to design a high, lithium battery chemical properties determine a cell output voltage can only be about 3.6V, so Many batteries are used in three cascade way, 10.8V also became a very popular battery voltage. Some batteries are slightly larger than the integer value of 3.6V, such as 3.7V or 11.2V, etc., in fact, to protect the battery. Power supply, the situation is more complex, first of all need to add voltage to further regulation filter to ensure that the power performance is not very good in the case of stable work, the voltage regulator after the two parts of the city, all the way to the work of the power supply , The other way to the battery charge to the part of the power supply to the battery when the same power supply, and the part of the battery charge through the battery charge control circuit can be added to the battery, the control circuit can be very complex, so the power The voltage must be greater than the cell voltage to have sufficient capacity to supply the charge control circuit to the units. Finally the voltage actually added to the cell will never be the nominal voltage of your power supply. Rest assured.
Q:Is it possible to use a different laptop's power adapter?
It is recommended to use the original comes with the adapter, different adapter output voltage is not the same
Q:How do I select a drive? Which brand is better
   4, when the inverter is used to control several motors in parallel, be sure to consider the inverter to the motor cable length of the sum of the inverter in the allowable range. If you exceed the specified value, to enlarge one or two steps to select the inverter. In addition, in this case, the inverter control mode can only be V / F control mode, and the inverter can not protect the motor over-current, overload protection, this time in each motor on the fuse to achieve protection.     5, for some special applications, such as high ambient temperature, high switching frequency, high altitude, etc., this time will cause the inverter derating, the inverter need to enlarge a file selection.     6, the use of inverter control high-speed motor, due to high-speed motor reactance small, high harmonics also increase the output current value. Therefore, when selecting a frequency converter for a high-speed motor, it should be slightly larger than the inverter of an ordinary motor.     7, the inverter for the variable pole motor, should pay full attention to select the inverter capacity, so that the maximum rated current in the inverter rated output current below. In addition, in the operation of the number of pole conversion, you should first stop the motor work, otherwise it will cause the motor idling, bad will cause damage to the inverter.
Q:Laptop power adapter current is not the same alternative?
The adapter is the voltage source, the actual output current depends on the size of the load resistance,
Q:A 4-pole AC motor into a 2-pole AC motor, the motor is controlled by the inverter, to make the maximum speed of the 2-pole motor and the original 4-pole
First reduce the frequency of about one-third of the test, not the case, then appropriate adjustments!
Q:Laptop adapter heat
Therefore, in the design and production of switching power supply, we must choose high temperature components. Of course, be sure to control the temperature of the power supply within the allowable range of the application environment. First, the conversion efficiency should be designed as high as possible, and secondly, to use the pressure drop is small, low loss of switching components, the third is to be thermal design, cooling area to be as large as possible, more than 100W switching power supply Should have a metal perforated shell, or add a cooling fan. The current notebook power adapter power is generally around sixty or seventy W, the use of high temperature plastic fire sealed package, the internal heat generated by the plastic shell mainly distributed out. Therefore, the power adapter surface temperature is still quite high, the maximum temperature or even reach about 70 degrees! Think of the inside of the adapter, it is not like the fire! So, when you use the laptop, try to place the power adapter in a better place to ventilate heat, do not put books and the like on the power above. As for the kind of hot feeling, do not have to worry about is the power, not angry strange!
Q:Old printing machine transformation, 37KW6 polar frequency motor with brake, inverter 55KW, now found running,
It should be the inverter problem, I have encountered before, followed by the inverter upgrade was resolved. Is to replace a set of power board, power board, CPU board.
Q:A water supply project, how to choose electrodes and frequency converters, such as giving a 7-storey water supply
3. Take a doorway as an example: choose DN50, N = 7.5Kw enough. About 50 cubic meters / H.
Q:What is the principle and implementation of the inverter?
AC inverter principle. It is the first AC current will be converted into direct current, and then use the electronic components of the DC switch. AC power. General power of the larger inverter with a thyristor. And set an adjustable frequency device. The frequency in a certain range adjustable . Used to control the number of revolutions of the motor. The number of revolutions can be adjusted within a certain range. The frequency converter is widely used in the speed regulation of AC motor. Frequency control technology is an important development direction of modern power transmission technology, with power electronics Technology development, exchange frequency conversion technology from theory to practice gradually mature. Inverter not only smooth speed, large range, high efficiency, start current is small, smooth operation, and energy saving effect is obvious. Therefore, the exchange frequency control has gradually replaced the traditional traditional slip speed, variable speed control, DC speed control system, more and more widely used in metallurgy, textile, printing and dyeing, smoke machine production lines and buildings, Water supply and other fields. Generally divided into rectifier circuit, flat wave circuit, control circuit, inverter circuit, and so on several major parts.
Q:Delta VFD-F frequency converter how to adjust the number of poles
Look at the 07 motor parameters, I VFD-F instructions need, then the mailbox sent

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range