Forklift Truck with Smart Performance, High Quality and Good Price
- Ref Price:
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 500 m²/month
- OKorder Service Pledge
- Quality Product
- Order Online Tracking
- Timely Delivery
- OKorder Financial Service
- Credit Rating
- Credit Services
- Credit Purchasing
Product Name: Forklift Truck with Smart Performance
1. Specification
GENERAL INTRODUCTION | 1 | MODEL |
| FD40B-W1 | ||
2 | POWER TYPE |
| DIESEL | |||
3 | RATED CAPACITY | kg | 5000 | |||
4 | LOAD CENTRE | mm | 600 | |||
CHARACTERISTIC AND DIAMENSION | 5 | LIFT HEIGHT | mm | 3000 | ||
6 | FORK SIZE | L×W×T | mm | 1220×150×65 | ||
7 | MAST TILT ANGLE | F/R | Deg | 6°/12° | ||
8 | FRONT OVERHANG(Wheel center to fork face) | mm | 487 | |||
9 | GROUND CLEARANCE | mm | 140 | |||
10 | OVERALLDIMENSION | OVERALL LENGTH(Without fork) | mm | 2460 | ||
11 | OVERALL WIDTH | mm | 1150 | |||
12 | MAST LOWERED HEIGHT | mm | 1985 | |||
13 | MAST EXTENDED HEIGHT (With Backrest) | mm | 4030 | |||
14 | Overhead Guard Height | mm | 2070 | |||
15 | TURNING RADIUS (outside) | mm | 2170 | |||
PERFORMANCE | 16 | Speed | TRAVEL(Full load) | km/h | 19 | |
17 | LIFTING (Full load) | mm/s | 490 | |||
18 | MAX. GRADEABILITY | % | 20 | |||
FRAME | 19 | TIRE | FRONT | 7.00-12-12PR | ||
20 | REAR | 6.00-9-10PR | ||||
21 | WHEELBASE | mm | 1600 | |||
22 | SERVICE WEIGHT | kg | 3350 | |||
POWER AND TRANSMISSION | 23 | BATTERY | VOLTAGE/CAPACITY | V/Ah | 12/90 | |
ENGINE | ||||||
25 | MAUFACTURE |
| ISUZU C240 | |||
26 | RATED OUTPUT/R.P.M | kw/rpm | 37/2650 | |||
27 | RATED TORQUE/R.P.M | N·m/rpm | 148/1800-1900 | |||
28 | NO.of CYLINDER |
| 4 | |||
29 | BORE×STROKE | mm | 90×105 | |||
30 | DISPLACEMENT | cc | 2540 | |||
31 | FUEL TEAK CAPACITY | L | 60 | |||
32 | GEARBOX | TYPE | ELECTRICAL SHIFT/MANUAL SHIFT | |||
33 | STAGE | F/R | 1/1(2/2) | |||
2. Application
For Transporting Goods
3. Package
Put into containers.
FAQ:
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some Forklift Truck with Smart Performance according to customers request?
A4: Yes, we can produce Forklift Truck with Smart Performance according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:Where should I take the special operation equipment certificate for the forklift?
- You can get a forklift operation certificate when you pass the exam. The certificate is found on the website of the state administration of quality supervision.
- Q:What's the tonnage of the forklift
- The standard forklift truck is usually one ton, two tons, three tons Special choice in addition to the standard forklifts, forklift with a container for container operations, points into the tank container forklift forklift (2 ~ 5 t), the empty container stacking forklift (7 ~ 10 t) and a tank full of loading and unloading container forklift (20 ~ 42 t) Each rating of the forklift truck crane quality refers to the cargo weight within the standard load center distance forklift, forklift truck door frame, vertical lifting by forklift standard lifting height (hoisting height provisions in China standard is 3000 mm) when lifting the quality of the goods. User when choosing forklift tonnage, therefore, should be based on the center of gravity of the loading and unloading goods compared with the size of the forklift truck standard load center, such as cargo center of gravity is equal to or less than the standard forklift load center distance, is the selected forklift lifting quality rating equal to or higher than the goods quality. If the center of mass of the cargo is greater than the standard load center of the forklift truck, the loading curve of the forklift truck will be determined according to the loading curve of the forklift truck.
- Q:The forklift license test is for those
- Ordinary driving forklift belongs to the special vehicle, can't registration, registration unit is the local bureau of quality and technical supervision of special equipment safety supervision department registration first, when they reach a certain number of unified exam. The exam is organized by the "special equipment operator exam center". Exam fees according to the local "about special equipment operating personnel safety skills examination fee standards", usually specialized technical theory test costs 40 yuan/person. Time, practical test costs about 120 yuan/person.. For six years, every two years.
- Q:How to start a forklift? Say detailed point
- Turn the key clockwise and start the engine; First notice the cargo fork: the control lever of the operating door is raised about 300 mm from the ground, and then the door frame is tilted forward to move. Step down the clutch control panel and move forward the back control lever and the gear stop. Slowly release the clutch pedal completely; Forbidding wild driving: don't turn on the key switch when stepping on the accelerator pedal. Do not suddenly start, brake or turn to prevent the fall of the cargo. Don't run over the barriers or obstacles that litter the road. Don't get into the soft ground; When driving on a wet, slippery, uneven or sloping road, please lower your driving speed. Make sure there is a gap between the door frame and the roof and the entrance.
- Q:How do you drive the forklift
- (1) check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective. (4) the forklift should check the pressure and the temperature is normal. (5) after the operation of the forklift truck, it should also check the leak and replace the sealing part in time. (6) the electric cylinder forklift should check the contents of the electric car and inspect the circuit of the electric bottle forklift.
- Q:What are some of the common failures of forklifts?
- First, if the generator is normal, if the generator is normal then it is the problem of the battery. The most stupid way to measure the virtual voltage of a direct battery is to charge the battery with a charger, and if it can't be plugged directly, the battery will be dead. Change generators or batteries. When you turn on the key switch, you turn on the key switch and start clicking. Change the starter 3, if the key switch is bad, start with a little bit of reaction fluid. In the key switch 4, the oil pump is not supplied with oil and this needs to be removed and sprayed. In exchange for oil pump or repair. There is no oil in the tank. Come on! There is no oil measuring tape. Add oil! 7 and 8, twist the key switch, and the motivation is normal, but you can't afford a car, or get up and stall. Repair engine!
- Q:How do you change the oil of the forklift truck, without a slot and a jack, so you can change it on the ground? Do you know a teacher?
- You can do it with a little bit of energy and you can see it on the low side of the low shell and the oil screw
- Q:What is the cause of my forklift
- There was no oil tank; Come on Oil pumps do not pump oil; Replace the oil transfer pump 3, pump plunger wear; Replace the pump plunger 4, the oil supply time is not right; Adjust the oil supply system 5, disordered; Adjust the gas parameters 6, the battery is dead. Replace the battery 7, the connection line is in bad contact; Reconnect the 8, starting motive failure; Professional manufacturer's repair
- Q:Skill and use of side forklift?
- Side forklift characteristics: The lateral forklift can carry all sorts of super-long weights, which can be run on narrow channels, which is not possible for the average head forklift truck. The side forklift can carry out the operation of the resetting of various molding goods. We will improve the storage and storage of the goods, and we will standardize the operation of the board, warehouse and yard The necessary machinery. The lateral forklift truck can self-load, self-transport, dump all kinds of large goods, one machine can do more, save the middle process of the job, improve the efficiency of work. The lateral forklift can transfer all kinds of equipment and goods in various places
- Q:What is a forklift truck
- In general paper goods factory USES a lot of, be in the forklift truck to add a clip to call a hug car
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Similar products
New products
Hot products
You Might Also Like