Forklift Truck Gasoline with LPG (2-3.5 Ton)
Power:LP Gas Engine
Load Capacity:1T - 5T
Production Capacity:500 units / month
Japanese TCM technology;
Load capacity 3.0tons,
VM300 (two stage mast, with lifting height 3.0m),
Fork length 1070mm;
With Chinese famous GuangQing gasoline engine or Japanese famous Nissan gasoline engine,
With complete USA IMPCOLPGsystem,
Hydraulic transmission (same supplier as TCM),
|4||Gearbox change speed type||Hydraulic/Mechanical|
|5||Power type||Gasoline /LPG|
|9||Free lift height||mm||140||145||150|
|11||Mast tilt angle||Fwd/Bwd||deg||6/12|
|12||Overall length (without fork)||mm||2513||2583||2698||2725|
|14||Mast height fork lowered||mm||1995||2070||2160|
|15||Overall height fork raised||mm||4030||4250||4356|
|16||Overall height (overhead guard)||mm||2070||2090|
|17||Turning radius (outside)||mm||2170||2240||2400||2450|
|18||Load distance (centerline of front axle to front face of forks)||mm||483||498|
|19||Minimum Aisle -90 degree stack(Add load length and clearance)||mm||2640||2710||2885|
|23||Min. Under-clearance ||Bottom of mast||mm||110||135||145|
|24||Bottom of frame||mm||115||140||140|
|Performance||25||Speed||Travel Max.||With load||km/h||17||18|
|31||Max. Drawbar pull||With/without load||kg||1250/850||1250/850||1100/1000||1304/1190|
|33||Max. Gradeability||With/without load||% (fan)||20/20||17/18||15/18||15/18|
|35||Weight distribution||With load||Front||kg||4730||5480||6455||7320|
|Brake||41||Brake||Service ||Hydraulic-Foot pedal|
|Transmission||43||Battery||Voltage / Capacity||V/AH||12/100|
|44||Internal combustion engine||Model||MITSUBISHI /NISSAN / HW491/GQ-4Y |
|46||Rated torque||N. m/rpm||161/1600||185/1600|
|47||Number of cylinder||4|
|49||Fuel tank capacity||lit||70||70|
|51||Shift (Fwd/Rvs)||1/1 (2/2)|
- Q:Hydraulic forklift truck classification
- Hydraulic manual push high car, TF type hydraulic platform, cotangent cylinder, electric platform car, semi-electric drive, WAWP hydraulic forklift truck. Electric walking, hydraulic lift; It is light weight, low body, light operation and wide view. The frame design is strong and the bearing capacity is strong. It is stable, the electromagnetic braking of the motor output shaft. Large capacity traction battery to ensure long working hours. Electric drive, electric lift; It is easy to operate and has broad vision. The frame is strong and the bearing capacity is strong. It runs in a balanced way. Large capacity traction battery to ensure long working hours.
- Q:Electric forklifts can be used for a long time
- Look at the use case, look at work environment, look at worker's labor attitude, average about a year and a half.
- Q:Which is better, solid forklift tyres and inflatable forklift tyres?
- A forklift truck is a solid tire or pneumatic tyre? The characteristics of the solid tire of the forklift truck: good wear resistance and a life span of 3-4 Double, no rupture (unless the tyre quality problem)
- Q:Why do you lean forward when you're driving with a forklift?
- Cargo fork and cargo should be tilted forward, not forward, not for the sake of safety, not for convenience. If there is a person in front of a forward or parallel load, the person will be hurt when the brake is on. The latter is designed to make the goods more stable and create a resistance. Forklift truck: a forklift truck is an industrial transport vehicle, which is a variety of wheeled transport vehicles for loading and unloading, stacking and short-range transportation. International standardization organization ISO/TC110 is called an industrial vehicle. Often used for the transportation of large items in storage, usually with a fuel engine or battery.
- Q:What the forklift needs to be aware of...
- The forklift truck is prohibited from taking the goods at high speed and forbidding the personnel to stand on the fork; When taking the cargo work, the personnel are not standing around the fork, so as not to be hurt. The driver should check the crane chain, the door frame, the cargo fork, and whether the bolt is firm. Check for fuel oil, lubricating oil, check start-up, operation, and braking performance. Check the light and sound signal to be fully valid and confirm normal restart operation. After starting the engine, listen to the operation of the engine and check the instructions of each instrument. When there are mechanical problems, you can't repair yourself. You should close the forklift and inform the mechanic. The driver should observe four weeks before the start of the forklift truck. The carrier will start off slowly and smoothly and make sure the cargo is stable and reliable.
- Q:Who sells natural gas forklift
- Dual-fuel forklifts are exchanged for gasoline and liquefied gas or diesel and liquid gas, and the two fuels can be converted from a switch on a forklift. The liquid gas is different from natural gas, but it can be used.
- Q:What do you need to do to get a forklift license from the quality technology supervision bureau
- The driver of forklift has written test and practice exam, which is divided into two major categories, the pile test and the road test. There are different ways of testing in the area. Some areas are the actual driving forklifts, the actual operation of driving forklifts, the inspection of the rods, the line, the start, the fork, etc. This reflects the management of a region.
- Q:A manual forklift oil leak, what if you can't get up?
- Internal leakage (1) there is too much friction between the stem and the valve body Multiple directional control valve hoisting and tilt on the stem of each have three groove, groove and oil that can be switched on or off oil, change the way to work. Good distributing valve clearance between the valve stem and valve body is small, the spill is few, so the hydraulic cylinder down or tilt volume is small, do not affect work. But when wear clearance is too large, under the pressure of the hydraulic oil pump at work to produce, can cause work in oil or oil spill oil and the oil return tao, automatic back to the tank. The reason is mainly, because of the distributing valve use for a long time or the oil not clean accelerated wear of valve stem and valve body, such as destroy the sealing surface, lead to the oil. Repair if stem wear lighter, when to stem chrome plated finish; If the stem is worn badly, it needs to be replaced.
- Q:What is a forklift worker
- Power: currently there are four types of gasoline, diesel, liquefied petroleum gas and battery. Two forklifts, which use petrol and liquefied petroleum gas, are common indoors and outdoors. Of liquefied petroleum gas (LPG) due to the popularity of bottled gas, to simplify the forklift truck fuel supplement work, help to save maintenance and operation cost, less clean fuel gas combustion, slagging, lubricating oil consumption is small, prolong the life of the forklift truck, thus increasing popularity.
- Q:How about the forklift truck training, the forklift wages
- The level of skills needed to be re-established for on-the-job staff, such as position transfer. About post to create positions, forklift worker trainee 1 to 3 months after the inspection qualified rear can formal mount guard after probation period, the trainee and obtainment of the wage level of different forklift worker hired for 1 to 3 months after the probation period, probation, organization work skill examination and confirmation, after assessment is eligible to positive after giving skills rating, according to the different level skills allowance, obtainment of outstanding achievement appraisal of employees can be paid or given directly across their post grades, but the largest for level 3. For those who have had the higher skills and experience in the position, they may be qualified as junior, intermediate or senior.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range