Forklift Truck 2.5t CNG Gas with Engine (FGL25CTJ)
Power:CNG Gas Engine
Load Capacity:1T - 5T
Fuel Tank Capacity:50L
Length to Fork Face:2620mm
Lifting Speed(with Load):450mm
Lifting Speed(Without Load):550mm/H
Reasonably low-center gravity design:By computer digital imitation,the most suitable and stable low center of gravity is designde. At the same time, body is weld by high intensity steel plate, assuring forklift being more stable and safe in traveling.
Double-"J"high rigidty mast material and intelligent system of downing and buffering.
Wider and more comfortable seat.
Tilt-adjustable steering wheel.
Human-based hydraulic steering-handle
Super elastic solid tire
Shock absorption system
|Rated Capacity ||Q(kg)||1500||2000||2500|
|Load center ||C(mm)||500||500||500|
|Wheel Type-Front/Rear||PU Polyurethane Solid tyre|
|Front Wheel ||φ267×114||φ267×114||φ267×114|
|Drive Wheel ||φ343×108||φ343×108||φ343×108|
|Tyres No. -front/rear (X=Drive wheel)||2 / 1X /2||2 / 1X /2||2 / 1X /2|
|Fork Tilt Angle----Upward/Downward--deg.||α/β(º)||3/5||3/5||3/5|
|Lift Height ||h1(mm)||3000||3000||3000|
|Height--Free Lift ||h2(mm)||100||100||100|
|Height-Mast Extended w/ Load-Backrest ||h4(mm)||3910||3920||3920|
|Height--pedal to overhead guard||h6(mm)||1888||1888||1888|
|Mast Min Ground Clearance||h7(mm)||80||80||80|
|Overall Length w/ fork||11(mm)||2284||2471||2471|
|Overall Width ||b1/b2(mm)||1098||1258||1258|
|Width across forks||b5(mm)||220-662||247-780||247-780|
|Aisle width for pallet 1000*1200||Ast(mm)||2690||2938||2938|
|Aisle with for pallet 800*1200||Ast(mm)||2568||2794||2794|
|Travel Speed -laden/unladen|| km/h||7.5/8.5||7.5/8.5||7.5/8.5|
|Lift Speed -laden/unladen||mm/s||117/243||110/243||110/243|
|Max. Gradeability -laden/unladen||%||≤10||≤10||≤10|
|Drive Motor type||AC||AC||AC|
|Driving Motor (S2 60)||kw||5.5||5.5||5.5|
|Lift motor type||DC||DC||DC|
|Lift Motor (S3 15%)||kw||6.3||7.5||7.5|
|Steering||Steering type||Full hydraulic|
|Parking Brake model||Mechanical Disc Braking |
|Parking Operation type||releasing brake|
|Service Brake-Operation type||release braking|
|Other||Battery Change type||Forward loading|
- Q:The basics of driving a forklift
- Note the position of the gearshift and the reverse pole. The speed of the forklift truck is slow, usually only one and two blocks, and a reverse gear is specially set up. When driving, first hang in the reverse gear, switch the forklift to move forward or back, then push the shift lever to 1 stop and start smoothly. The forklift does not stop changing direction, causing damage to the transmission.
- Q:The component of electric forklift drive system
- An electric forklift is a forklift, which USES electricity to do its work, mostly for batteries. The battery is a type of battery that is used to store a limited amount of electricity in the right place. It works by converting chemical energy into electricity. This is the battery in the battery of an electric forklift. Be careful: the battery had better not be horizontal! Because the interior of the battery is typically 22 to 28 percent of dilute sulphuric acid. Battery is put electrolyte can drown plate and left a little space if the battery laid-down there will be a part of the plate electrode exposed to air, this is very bad for battery plate, and the general observation hole or the top of the battery cells are vent communicates with the outside world, so the battery electrolyte askew is easy to flow out.
- Q:Where are the advantages and disadvantages of a battery lifter and a diesel forklift
- Different kinds of forklifts are formed because of the difference in the structure and location of the four most of the forklifts. A balanced truck is the most common form of forklift truck. Let's take the forklift truck as an example and introduce the parts of the forklift truck. Dynamic part 1. Most of the power of the internal combustion forklift truck is powered by reciprocating piston type internal-combustion engines. It has petrol engines, diesel engines and liquid oil jets. Power forklifts are made up of batteries and dc series motors. In recent years, new forklifts have come out, powered by dual-fuel or dual-powered vehicles. The drive system is the device that takes power and transfers power to the driving system. It has two kinds of mechanical drive system and hydraulic mechanical transmission. The former consists of a friction clutch, gear transmission, wanxiang transmission gear and main drive and differential in the drive bridge. The latter replaces the friction clutch with a torque variable, and the rest is the same as the former. In recent years, new forklift trucks have been introduced and all hydraulic transmission systems are adopted. Reduces the component of the drive and ensures reliability.
- Q:What is the cause of my forklift
- There are a lot of reasons why you can't start, and the owner doesn't say whether it's an internal combustion fork or a forklift truck.
- Q:Who sells natural gas forklift
- Dual-fuel forklifts are exchanged for gasoline and liquefied gas or diesel and liquid gas, and the two fuels can be converted from a switch on a forklift. The liquid gas is different from natural gas, but it can be used.
- Q:What is a forklift worker
- First know what a forklift is, and the driver of this car is a forklift 1. An overview of the The forklift truck is designed for handling goods and short distances, the main lifting device is a fork, and can be fitted with various types of equipment. This forklift is best suited for smooth, hard surfaces (asphalt, cement, etc.). Used for loading and unloading of warehouse, railway station, shipping dock, construction site, etc., which can reduce the labor intensity of staff and improve the efficiency of loading and unloading.
- Q:Do forklifts need to be measured?
- Forklift does not need to be measured because forklift is not a measuring device but is a special equipment. The forklift needs to be tested annually. According to the factory motor vehicle supervision and inspection procedures "China quality inspection boiler no. 16 , article 3: the new and repair or reconstruction of motor vehicles in the plant, put into use before, shall, in accordance with the provisions of this regulation, a regular inspection every year. Encounter may affect the safety and technical performance of natural disasters or motor vehicles inside the plant after the equipment accidents, and stop using more than one year use of motor vehicles in the factory, again after a make-over, shall, in accordance with the provisions of this regulation the acceptance inspection of the content.
- Q:What are the types of battery forklifts
- Electric forklift can be divided into three categories: balanced, heavy electric forklift, storage electric forklift, and pre-moving electric forklift. A balanced, heavy electric forklift is powered by an electric motor and a battery is energy. The load capacity is 1.0 ~ 4.8 tons and the width of the job channel is usually 3.5 ~ 5.0 meters. No pollution, no noise.
- Q:What is the principle and function of the forklift differential
- Forklift differential classification: the structure of the conical wheel (umbrella), the structure of the cylinder wheel, such as torsion and torsion and so on, with more differential on the forklift at present widely used four planetary gear (umbrella gear to form), the range of the structure of the twisted to form a differential. Normal form of differential forklift: is mainly composed of shell, planetary gear (cross shaft to form) and four quadrant gear, planetary wheel axle and half axle gear, adjusting shim, half shaft, and so on
- Q:How about the forklift truck training, the forklift wages
- As the saying goes, the skill is no burden, for some have no record of formal schooling, and without any special skills, learn a skill alongside the body should be the right thing to do, learning forklift is right choice, forklift worker's monthly salary composition material member forklift driver: post salary + skills allowance + fall class expense + on performance-related pay receiving, issuing forklift driver: salary + month performance salary + skills allowance job salary is the basic wage, this related to many factors, such as local economic level, the wage, the skill level of the individual, etc., usually ranging from 2000-3000 implementation skills allowance for forklift driver positions. The reward salary for the skill level that the individual has received in the position, encourages the employee to do the job well
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range