Flexible Bottle Line For Pet Bottles With Good Quality
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 2000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Flexible Bottle Line For Pet Bottles
1.Structure of Description
This machine is used to fill pure water, mineral water and other non-carbonated beverage.
The automatic plastic bottle liquid filling machine is equipped with suspension type air conveyor and frequency control of motor speed.
This machine is comprised of rinsing, filling and capping system. Rinsing: grip the bottle neck, rotate filling plate, inverse bottle; internal rinsing and external spraying make bottles be cleaned completely. Filling: gravity filling with holding bottle neck; the special backflow type of the filling valve can avoid leakage after filling and also control liquid level accurately. Capping: magnetic torque bottle holding type can minimize the cap damage rate and make the capping performance the best.
This machine owns the reasonable, stable and safe design. Under the condition that the bottle neck size is the same, only the output star wheel needs to be changed if bottles are different. It improves the efficiency a lot.
2. Main Features
Steady and high quality
Fast shipment
Good experience for export work
3. Images
4. Specifications
Type:Filling Machine
Application:Beverage
Packaging Type:Bottles
Packaging Material:Plastic
Rated Output(500ml bottle):1000 bottle/hour
Compressed Air Consumption:0.25Nm3/min
Water Consumption:2.5m3/h
Filling Valve Head Count:24
Filling Valve Flow Rate:140~160ml/s
Power:5.5KW
Model Number:CGF24-24-8
Dimension(L*W*H):2900*2200*2300mm
Weight:4.5 T
- Q:What are the main plastic forming processes?
- 3. cold pressing molding. Cold pressing molding is also called cold pressing sintering molding. The difference between the cold press molding and the ordinary compression molding is that the material is pressurized and molded at room temperature. The mold after release can be heated or cured by chemical action. This method is used in the forming of polytetrafluoroethylene and some high temperature resistant plastics (such as polyimide, etc.). The general process is three steps of billet sintering cooling.4. transfer molding. Transfer molding is a molding process for thermosetting plastics. When molding, the mold is heated and softened in the heating chamber and then pressed into the mold cavity where it has been heated. According to the different types of transfer molding equipment form: trap type; the tank; the piston.The requirement of plastic molding for transfer molding is that the plastic should have a greater fluidity before reaching the curing temperature, and the curing rate must be faster at the curing temperature. Phenol, melamine, formaldehyde and epoxy resins can meet this requirement.Transfer molding has the following advantages: less waste edge products, can reduce the processing quantity; second molding with fine or brittle insert and perforation of the products, and can keep the insert and the hole position is correct; the product performance is uniform, accurate size, high quality; the mould wear small. The disadvantage is that the manufacturing cost is high compression mold die; the plastic loss; the fiber reinforced plastics for fiber orientation and anisotropy; and around the insert around the plastic, sometimes due to melting is not strong and make the products according to the strength reduction.
- Q:How does the pulp solidify? What additives do you need? Curing agents? Or what do you need as binders?
- (1) urea formaldehyde moulding powder;The resin powder of urea formaldehyde resin, commonly known as electric jade powder, is produced by wet process, such as tree ester, curing agent, filler, colorant, lubricant, stabilizer, plasticizer and so on1 Components(1) resin used for urea formaldehyde resin molding powder by condensation reaction degree is relatively shallow, the resin with low viscosity, easy dipping filler, and can ensure the long production cycle and drying after proper fluidity, condensate in the industrial use of urea and formaldehyde at low temperature (a mixture of dimethylol urea, urea and formaldehyde) are usually used. The ratio of 1:1.5 (molar ratio), the PH=8 (and temperature) 30 - 35 of all dissolved, adding urea oxalate was 0.3% - 0.33% and 0.88% - 0.54% of the oxalic acid, then the occurrence of exothermic reaction, temperature rise, temperature in 55 - 60 degrees, and strictly control the PH=5.5 - 6.5, 60 - 75min by urea formaldehyde resin is required. Because the condensation degree is low, in fact just over addition reaction, condensation reaction is mainly in the curing process.(2) the curing agent used in curing agent and pressing powder requires latent, usually oxalic acid, phthalic acid, two formic acid, benzoic acid, chloroacetic acid, etc.(3) packing material is the most commonly used pulp, followed by wood powder or inorganic fillers (glass fiber, asbestos, mica etc.). The pulp is wood as raw material, with sodium bisulfite, non soluble cellulose impurities to the wood, and then byThat is the pure cellulose bleaching. The amount of filler material for the total amount of 25%-32%, the amount is too small, the pressure of plastic powder fluidity big, product strength is low; on the contrary, the amount of excessive pressure, plastic powder fluidity decreases, the product surface is not smooth, water
- Q:Which friend is an expert in mechanical equipment or a better understanding of sealing machines? Tell me how to identify the equipment
- If these are good, and then talk about the price, always a penny goods, this side, quick packaging machine is not bad,
- Q:What's the best place to use the pillow type packing machine?
- In the early communication can be reflected, and sometimes non-standard customized to see the level of Technology
- Q:How much is the tableware wrapping machine?What's the price of the tableware wrapping machine?
- Tableware packing machine? Should the packing of the tableware be contracted? Tak Cheung packing machinery, automatic heat shrinkable tableware packing machine can be considered
- Q:What is the general packing cost of beer beverage packaging?
- In addition, according to the product's own conditions to set, the packaging machine prices are generally in the range of 3-5 yuan
- Q:What are the structures of the packaging machinery?
- Is far from a professional engaged in "packaging machinery" research and development, production, sales as one of the multinational enterprise groups. It is the largest manufacturer of packaging machinery in china. Located in the Chinese science and Education City - Hefei, the geographical position is superior, the traffic condition is convenient, and the sale network extends the whole country. Is far from, with a group of the world's top machinery manufacturing R & D team, specializing in all walks of life packaging enterprises, for the efficient production of enterprises to provide power. It is a large enterprise that put forward the concept of packaging automation earlier in china. Brand with strong economic strength, first-class R & D level, advanced business philosophy and good brand service, more and more people all over the world are respected and trusted. The entire manufacturing process in full accordance with the highest standards of global manufacturing; at the same time according to the quality standard of global market development process, operating procedures and quality control system of production, all is "far Machinery" have reached world-class standards. "Far distance machinery" combines the characteristics of all kinds of products in China, such as packaging machinery, food packaging machines, two times packaging machines, powder packaging machines, particle packaging machines, liquid packaging machines, weighing machines, and so on. It is well received by Chinese enterprises!
- Q:What does the mechanical equipment include?
- Rail aligning machine, rail straightening machine, grinding machineSlag shaping machine for track flat car internal combustion engine
- Q:Color code positioning of packaging machinery
- The use of the printed color packaging materials, photoelectric switch (available on the color electric eye tracking and positioning), through the control system to drive the stepper motor rotation and color according to the distance between the automatic stop, to complete and accurate packaging products logo.
- Q:What is a packaging machine?
- Meet the needs of mass production and meet the requirements of clean sanitationUsually some non-standard equipment, the common is pneumatic and simple combination of electrical components, to meet the requirements of factory automation
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Flexible Bottle Line For Pet Bottles With Good Quality
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 2000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords