Fireroof Phenolic Foam Board for House Insulation
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m.t.
- Supply Capability:
- 6000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Fireroof thermal phenolic insulation foam board
1.Great heat insulation
2.Excellent sound insulation
3.Light weight
4.Long life
5.Fire resistance
Technical Data Sheet of Phenolic Foam | ||
ITEM | UNIT | SPECIFICATION |
Density | kg/m3 | 40-60 |
Double side Aluminum thickness | mm | 0.04, 0.08 etc. |
Total thickness | mm | 20-200 |
Thermal Conductivity | w/m.k | 0.020-0.030 |
Flexural Strength | Mpa | 1 |
combustion property | ~ | Non-combustible Class A |
Water Absorption Rate | % | 1.9 |
Max Smoke Density | % | 2 |
Dimension Change Rate | % | 0.3 |
Compressive Strength | Mpa | 0.25 |
Service Temperature | -200to200 | |
Standard Size | mm | 240*600*20-150(L*W*T) |
1. Excellent fireproof performance
Thermal insulation layer adopts phenolic foam, and other composite materials used for building insulation,
fundamentally eliminate the insulation and the possibility of fire, use temperature range is -200 °C ~ +200°C.
2. Thermal insulation energy-saving effect of prominent
Phenolic insulating plate has a good thermal insulation properties, its thermal conductivity is about 0.020-0.030W/ (m · K), far below the current market used inorganic, organic external insulation products, can achieve
higher energy saving effect.
3. A wide range of uses
Not only can be used for traditional exterior insulation system, can also be made with facing layer composite
thermal insulation decorative integration plate, but also can be used to construct traditional EPS/XPS/PU
external wall insulation system fireproof isolation belt, used as a curtain wall of fire insulation materials, fire door
inner insulation material, as well as low or high temperature fire insulation materials.
- Q:What are the uses of ceramic fiber boards?
- According to the conditions of use, can be divided into:Fire dragon high purity ceramic fiber fire block HLGX-364DThe dragon high alumina ceramic fiber fireproof plate HLGX-464D
- Q:What is the difference between ceramic fiber board and nano ceramic fiber board?
- The nano ceramic fiber board through the introduction of nanotechnology, the special production process, product performance has been greatly improved, high strength, low thermal conductivity, good heat insulation performance, energy saving effect is obvious, which improves the safety of the furnace, and in high temperature and high pressure conditions, can also play a good performance the product.
- Q:What method should be used to measure the thermal conductivity of fiberboard?
- Fiber board thermal conductivity of ceramic fiber board thermal conductivity information is mainly: ceramic fiber board thermal conductivity, thermal conductivity of ceramic fiber board price, thermal conductivity of ceramic fiber board wholesale, thermal conductivity of ceramic fiber board factory, discusses the protection method of hot plate test principle and method of MDF thermal conductivity and its relation with temperature; and analyzed the test error.
- Q:What are the specifications of the ceramic fiber board?
- Ceramic fiber board common specifications are: 600*400, 900*600, 1000*600 and 1000*1200mm, thickness 10/20/25/30/40/50mm, thinnest can do 6mm.Depending on the temperature range, it can be divided into:Common ceramic fiber board HLGX-164Standard ceramic fiber board HLGX-264High purity ceramic fiber board HLGX-364High alumina ceramic fiber board HLGX-464Ceramic fiber board containing zirconium HLGX-564
- Q:How much pressure can the ceramic fiber board withstand?
- Ceramic fiber fireproof plate, the density of 350-400Kg/m ceramic fiber board, fand; density above fand 400Kg/m.
- Q:Ceramic fiber plate and aluminium silicate plate are chosen as lining materials
- Ceramic fiber board is of high quality ceramic fiber cotton with low slag ball content as raw material, using specific pulp and mixing equipment, ensure the cutting length and the concentration uniformity of cotton fiber, using international advanced vacuum molding technology and international advanced processing technology, the product not only has excellent mechanical strength and precise geometry the size, and maintains the excellent properties of fibrous insulation materials, can be substituted for calcium silicate board also requires tough, self-supporting and refractory insulation field.
- Q:What are the differences between nano ceramic plate and ceramic fiber board?
- The biggest difference between the two is that:1, the coefficient of thermal conductivity is different, the nano ceramic plate is about three times of the ordinary ceramic fiber board2, temperature class is not the same, nano ceramic board maximum temperature of 1050 degrees, ceramic fiber board should be 1400 degrees temperature.3, the range of applications is different. Nano ceramic plate is mainly used in high, fine and sharp technical fields, and has strict requirements on thermal conductivity. Ceramic fiber boards are widely used and can be used wherever there is flame or temperature.
- Q:What are the sound-absorbing fiber boards?
- The theory on the absorption coefficient is the best sound-absorbing board sound-absorbing effect 1 (all suck, no reflections), but in reality, this material does not exist (black holes in the universe are the sound absorption coefficient is 1, which is completely absorbed)
- Q:Is there any difference between ceramic silicon fiber board and ceramic fiber board?
- Ceramic fiber board is aluminum silicate fiber board, a refractory material. Even after heating, good mechanical strength is maintained. The product is a fibrous insulation product that is rigid and has a supporting strength compared to fiber blankets. Features: ceramic fiber board has excellent quality, toughness and strength, besides, it has excellent resistance to wind erosion. The utility model has the advantages of no heat expansion, light weight, convenient construction, and arbitrary shearing and bending. The utility model is an ideal energy-saving material for kilns, pipes and other heat preservation equipment.
- Q:Refractory insulation board, pressure plate, nano heat transfer plate, calcium silicate board and ceramic fiber board, which is good?
- Ceramic fiber boardCeramic fiber board product categories:1260 standard ceramic fiber board sygx-264 1260 high purity ceramic fiber board sygx-3641400 zirconium ceramic fiber board sygx-564 1400 high alumina ceramic fiber fire plate sygx-464D1400 zirconium ceramic fiber fire baffle sygx-564D
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Fireroof Phenolic Foam Board for House Insulation
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m.t.
- Supply Capability:
- 6000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords