fiberglass mesh-60g/m2, 9*9/inch

Ref Price:
Loading Port:
China Main Port
Payment Terms:
Min Order Qty:
Supply Capability:

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Introduction

Fiberglass mesh, alkali resistant fiberglass mesh is on the basis of alkali-resistant or C-glass or E-glass woven fabric, then coated by acrylic acid copolymer liquid.

Characteristics: Good alkaline-resistance, high stength, excellent alkali and acid resistance, good cohesion, excellent in coating etc.

Uasge: It is widely used in wall reinforce, out side wall heat insulation, roof waterproof, reinforcement, plastic, bitumen, plaster, marble, mosaic. Etc. It is an ideal engineering material in construction.

Our best quality ablity:
1) mesh of warp and wet mesh is very straight
2)coating enough alkaline resistant glue and keep 60%-80% strength after testing in NaOH 28 days later
3)Made by C-glass or E glass fiber roving as basis material and then treated with acrylic acid coplolymer liquid.
4) our factory is the largerst fiberglass mesh manufacurer in China and the first Chiese factory which open fiberglass mesh factory in Dubai, UAE. In Chinese factory, there are more than 300 sets of textile machie and 8 sets of coating machines, every month we can produce more than 6000000 m2 fiberglass mesh. Dubai factory can produce more than 2000000 m2 every month
5) Dubai fiberglass mesh factory open in Dubai since 2012 year, no ant-dumping tax for europen countries, the quality can reach EU quality standard.

Weight: 45G/M2 --350G/M2
Weight: 45g/m2 3*3mm, 60g/m2 5*5mm, 60g/m2 3*3mm, 75g/m2 3*3mm, 80g/m2 5*5mm, 110g/m2 5*5mm, 110g/m2 10*10mm, 120g/m2 10*10mm, 130g/m2 5*5mm, 4*4mm, 145g/m2 4*4mm, 5*5mm, 4*5mm, 160g/m2 4*4mm, 4*5mm, 5*5mm, 190g/m2 4*4mm, 300g/m2 4*4mm, 400g/m2 4*4mm
Mesh size: 3*3mm, 4*4mm, 4*5mm, 5*5mm, 10*10mm
Color: White, blue, green, yellow, red
Width: 15cm --200cm
Roll length: 10m--500m

Inner packing: Plastic bag or shrink film
Outer packing: Export carton or pallet

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Each unit project of alkali resistant gridding cloth should send several groups for inspection.
The inspection length should be less than 3 if the material is used in 20000 ㎡ public buildings, residential, commercial buildings with the same construction, same production manufacturer and same process construction and less than 6 if the area is more than 20000 ㎡.
Q:For cement foam insulation board in roof insulation, does it need to use mesh?
What is above roof insulation layer is slope and leveling blanket, so it doesn't need to use mesh. The most ordinary mesh is wall insulation board. Roof insulation is only levled or flattened, let alone stel mesh. Then it is waterproof layer and protection layer. Protection layer is for waterproof layer. Thermal mortar will be used. But do not pave tile. Roof does not need mesh.
Q:Can glass fiber gridding cloth waste be recycled? If can, then what is is?
The acrylic in grid cloth can produce pungent smell and cause serious soil pollution after high temperature, which proves the environmental protection of glass fiber. It may cause serious air and soil pollution and contain harmful substance to respiratory system. And the core material of grid ding cloth is flame retardant and cannot be burnt.
Q:What is the construction method of external wall thermal insulation mesh
7, As the reqiured length and width, the meshes are cut from the entire roll of fiberglass mesh, leaving the necessary length for lapping or partial stack. 8, It is cut in the centre of a clean flat, cutting must be precise. The cutted mesh must be rolled up, and not allowed to fold or tread. 9, The reinforcing layer is made in the external corner of buildings, which should be laid the inner side, each side is150mm. 10, When coating the polymer mortar in the first time, the surface of EPS board should be dry, removing the harmful substances or impurities on the board. 11, a layer of polymer mortar is scraped on the surface of polyphenyl board, the scraping area should be slightly larger than the length or width of mesh, the thickness should about 2mm. Except the requirement for edging, the polymer mortar is not allowed to coat at the side of polystyrene board. 12, After scraped off polymer mortar, the mesh should be disposed on it. The curved surface of mesh faces toward the wall, coating from the center to the surrounding so that the mesh embedded in a polymer mortar, mesh should not be wrinkled. After the appearance is dry, and then wipe on a layer of polymer
Q:How long is a roll of mesh specially for external wall thermal insulation?
A roll of standard alkali-resistant fiberglass mesh is 100 meters. Some mesh may be only 70 or 80 meters because the manufacturers want instant interests.
Q:What steps should be taken to make wall fiberglass mesh?
1. Wall should be kept clean and dry. 2. Paste mesh at cracks and press tightly. 3. Confirm the gap has been covered by mesh, then cut useless mesh with a knife, the last step is to brush on mortar. 4. Leave it dry alone, then polish lightly. 5. Fill it with enough coat to make the surface smooth. 6. Remove extra mesh. Then, pay attention to that all the cracks have been properly repaired, decorate around with composite material to make it clean as new.
Q:Should gridding cloth be added when painting the inside corner of infilled wall and concrete column or shear wall?
It should be added, or crack may appear.
Q:Why does the first layer or double layers of alkali resistant glass fiber gridding cloth for external wall insulation should be thickened?
Because the first layer is exposed to the human activities and thus the insulation system may be damaged, therefore, the first layer or double layers of alkali resistant glass fiber gridding cloth for external wall insulation are often thickened for enhancing shock resistance of external insulation system. And two layer of more are not exposed to human, so single layered gridding cloth is ok.
Q:What additive does alkali resistant glass fiber gridding cloth has?
Ore melting status by purification of lower alkali content in wire drawing glass fiber grid cloth weaving to deal with
Q:The construction sequence of plastering alkali resistant glass fiber cloth (gridding cloth)
Cover and press the grid on the mortar. The easiest way is to plaster a layer first

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range