Specifications of Gypsum ceiling
1.Material: incombustible gypsum board,PVC facing, glue and aluminum foil backing
2.Size:600*600,603*603,600*1200 and 603*1206
thickness from 7MM to 9.5MM
3.Surface deal:Normally white color with over 50 kinds of designs such as 154.996.572 etc
Partial color such as 631, full color, silver color and golden color.
4.Edge:only square edge
Personality of Gypsum ceiling
1. Tidy, easy to clean and install
2. various choice with many fashionable design
3. price is very cheap, green products.
Application of Gypsum ceiling
Fasle ceiling in many apartment, factory office, school etc.
Technical data of Gypsum ceiling
HUMIDITY RESISTANT PROPERTY:
UP TO 95% RELATIVE HUMIDITY
LIGHT REFLECTANT PROPERTY:
ACCORDS TO GB8624-1997
Package of Gypsum Ceiling
1.Standard export package, film inside carton outside
2.8 or 10 pcs in one carton
We have 10 production line, 60 containers per month.we have powerful production ability and best price as well as professional team, why not choose us?
- Q:How do you remove the gypsum line between the ceiling and the wall?
- Very simple ah! With a small hammer with a small steel tip, frame a good tripod and then slowly chisel up!
- Q:Mediterranean style, do not gypsum line and ceiling can you?
- Yes, wallpaper selection on the need to pay attention, there is the focus of the late soft
- Q:Living room top is to do ceiling look, or gypsum line?
- The ceiling is good-looking, according to the height of the living room, if the height of 2.7 or more can be considered to do the ceiling, so the installation of downlight, the background wall will have the effect of shining down the ceiling inside the virtual light can also be installed, more colorful , But also according to your style of decoration may be, is the art of the ceiling or shape-shaped ceiling, etc., gypsum line price is relatively low, if with some style, such as pastoral, European and the like will look good. But do not consider the price, or the ceiling look good, the ceiling can be followed by a layer of gypsum line.
- Q:How to accept gypsum board ceiling?
- Installation of double gypsum board, the surface plate and the base plate of the joints should be staggered, not allowed in the same keel on the seam, self-tapping screws to brush anti-rust paint, in dealing with patchy putty paint.
- Q:Ward to the top how to paste plaster line
- Wardrobe to do from the top 10 to 15 cm distance, in the above take a block of 10 to 15 cm cap. Look specifically at the width of your corners. If there are 20, then stay a little more. Above the door to open the door, it is also recommended long and short
- Q:Gypsum board ceiling, always cracks, what is the reason?
- Fixed gypsum board self-tapping nail spacing is too large or part of the self-tapping nail force
1, to strengthen the operation of workers training.
2, self-tapping the nail did not attack the keel on the timely return of the nail, and in the distance about 2-3cm from the nail to strengthen the nail.
3, gypsum board fixed self-tapping screw, spacing edge size is less than 180mm, the central spacing of not more than 250mm.
4, burr gypsum board attack attack nail, as far as possible to the board, from the edge of the seam is greater than 15mm, so that both to ensure that the nail on the keel, but also reduce the gypsum board edge gypsum burst.
- Q:Decorative ceiling gypsum pressure line
- That garbage company you can immediately put his workers out of ,,,
2, you are very benzene ,,,
Pull that if it is easy to steel, that iron hammer to get, if it is expansion of the screw, then get a pliers will get ~!
Do not play plaster pressure line ~ that is the works of the early decades, and playing is not very good cut, and wood pressure lines do not distinguish the color. The The
Or the Quartet is good. The The I do not know how your room, or else you can give you a starting point
- Q:Gypsum board ceiling specifications which are detailed
- The main keel spacing is generally not more than 120 cm. Vice keel spacing 30 cm.
Home gypsum board general specifications is 1220mm * 2440mm, but do smallpox, then it depends on your original size and shape of the original
- Q:Gypsum board ceiling seam how to deal with?
- First with a good point of caulking gypsum treatment base, dry, the second treatment again leveling, pay attention to spatula to be flat, and then use a good point of the seaming agent or white latex plus paper bandage bonding, careful not to timely ventilation, To be closed to deal with dry after the beginning to do putty.
- Q:Ceiling ceiling is gypsum board installed with wood screws will fall?
- Gypsum board although there is a certain strength, but the plasticity is poor, so the screw can only be directly knocked into, can not be screwed into the wood screw, or can not let the gypsum board tightly "hold" the screws. That is, with a straight nail, can only be knocked into the no longer move, a move, gypsum board can no longer "hold" the screws, for the installation of lamps, lamps must be considered after installation, may be affected by the wind, , The impact of screw tightening, coupled with gypsum board because of the installation and materials, etc. reasons, the latter will have a certain deformation, will affect the screw in the gypsum board is loose. Once the screws are loose, the fixture will definitely fall.
Perfect,a well-known enterprise specializing in the production and sales of Gypsum board and gypsum ceiling, is a direct supplier for CNBM, the wold 500 strong enterprises.
Since the establishment of our company, we have been devoted to setting up a good CIS and completely implementing ISO9001 quality management system.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 10-US$ 50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||Above5000 square meters
|No. of Production Lines
||OEM Service Offered； Design Service Offered
|Product Price Range