Q:Now on the market scrap carbide blade (YG8 milling cutter) how much is one kilogram?

Now on the market scrap carbide blade about 100 yuan / kg, depending on the alloy composition, trading area and fixed.Cemented carbide is a kind of alloy material made by powder metallurgy process of hard metal and bonding metal of refractory metal.

Q:Method for assembling hard alloy cold heading die

Technological requirements for hole processing of cemented carbide die:1, carbide mold hole processing, selection, processing methods: according to the requirements of the drawings, select the electrical processing methods.2, select electrode material: according to the processing requirements, determine the processing methods and processing equipment to determine the electrode material.3. Design electrode: Design electrode according to clearance, shape and effective length of blade.4, processing electrode: generally use shaping grinding or square planer processing.5 、 clamping electrode.6, be processed carbide mold preparation.7. Calibration electrode.8 、 carbide mould clamping and positioning.9. Adjust the upper and lower positions of the spindle head.10, processing preparation.11, boot processing.12, regulation switching and intermediate inspection.13, carbide mold inspection: carbide mold after processing, should be carefully checked according to drawings, whether it meets the requirements of the drawings

Q:The milling of hard cutting workpiece hard alloy cutter knife edge collapse and Countermeasures of reason

Hard to turn materials require different speeds and special turning tools. There is a reasonable amount of feed. Ordinary alloy knives are very easy to break

Q:Is Zhuzhou the largest cemented carbide producer in Asia?

Of course, yes, or how could the 601 factory be so famous? That's the old military enterprise. It's the hard tool factory now. I hope it can help you!

Q:Where can I use cemented carbide?

The main application of carbide cutting tools, cutting tools and metal processing in geological drilling, drill and tool in shield construction. Manufacturing cutting tools, cutting tools, cobalt and wear-resistant parts, widely used in military, aerospace, aviation, machinery processing, metallurgy, oil drilling, mining tools, electronic communications, construction and other fields.

Q:Make cutting dosage

But modern machining, has no strict distinction between the T and G class, but in different types of processed materials and processing conditions, different ways such as the use of different materials, and with appropriate coating, to reduce the cost requirements.Cutting parameters need to be selected according to different cutting occasions and different materials to be machined.

Q:What does American standard cemented carbide grain size C mean?

Then, when the mixture is granulated and pressed and heated to a point near the bonding metal (1300~1500 DEG C), the eutectic alloy is formed by the hardening and bonding of the metal. After cooling, the hardened phases are distributed in a grid of bonded metals that are closely related to each other and form a solid whole. The hardness of cemented carbide depends on the content of the hardened phase and grain size. The higher the content of the hardened phase and the finer the grain, the greater the hardness. The toughness of cemented carbide is determined by bonding metal. The higher the bonding metal content is, the greater the bending strength is. The effect of grain size on the mechanical properties of metals has a curve diagram: the strength of both ends is large and the middle is low. Explain: the mechanical properties of single crystals are very good. The finer the grain, the better the mechanical properties, but the mechanical properties of the single crystal with infinite size are much better than the grain's infinitesimal! A lot of grain size control method, the main principle of two: 1, increase the metal crystallization undercooling of 2, increase the crystal nucleus specific methods: electromagnetic stirring, adding grain refiner (such as Aluminum Alloy plus Al-Ti-C master alloy as grain refiner), lower solidification temperature, and fine grain of alloy elements and so on many.

Q:Hard alloy and cast iron join together, use temperature 150 degrees, what glue is better to use?

High temperature resistant high strength metal and carbide inorganic adhesive YL04-3. For the structure of all kinds of cutting tools such as bonded &def hard alloy cutter and lengthened drill, geological drill; casting airhole crack repair; use temperature of -196 DEG ~800 DEG

Q:Hard alloy is tungsten?

Tungsten, titanium, tantalum (niobium) carbidesIs the main component of tungsten carbide, titanium carbide, tantalum carbide (or niobium carbide) and cobalt. This kind of hard alloy is also called universal cemented carbide or universal hard alloy.

Q:What is the tungsten alloy blade, what is the difference with the hard alloy blade? What is it for?

Tungsten alloy blade is a kind of hard alloy, metal processing used in the workpiece.You search for Zhuzhou cemented carbide first station can help you to find out more information