Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
10 m.t.
Supply Capability:
6000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Calcined Bauxite for aluminate cement

1.Introduction

Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there.By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns. 

2.Grade

gradeAl2O3 contentFe2O3 contentTiO2 contentK2O+Na2O contentCaO+MgO contentbulk density
7575%min ≤ 3.0% 4.0% 0.3% 0.5% 2.70
8080%min 3.0% 4.0% 0.3% 0.5% 2.80
8585%min 2.0% 4.0% 0.3% 0.5% 3.00
8686%min 2.0% 4.0% 0.3% 0.5% 3.10
8787%min 2.0% 4.0% 0.3% 0.5% 3.20
8888%min 1.8% 4.0% 0.25% 0.5% 3.25
9090%min 1.8% 4.0% 0.25% 0.5% 3.30

3.Application

mainly used in  aluminium metallurgy,aiso used in  abrasive ,cement ,chemical,  refractory

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price

Factory Directly 85% also3 1-3mm Calcined Bauxite with Low Price


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What is the difference between metallurgical coke and chemical coke
Chemical coke:Chemical gasification coke, the intensity of the requirements are not strict, but requires a good reaction, high ash melting point; calcium carbide production requirements for coke to improve the fixed carbon contentQuality index of coke
Q:Who knows the proportion of pig iron and coke used in Cupola
There is doubt: the export rate is lower than the standard exception.4, blank blank processing: according to customer requirements of different direct sales, some need to continue processing after the sale, the ordinary rough machined after a blank rate of about more than 70%, about 30% (excluding scrap scrap), dryer enterprises after after machining yield is about 25% ~ 30% (including waste scrap and iron, basically use recycled material, material waste accounted for ratio of 30% ~ 40%). To 1.5M x 2M cylinder, for example, rough weight of about 5.8 tons ~ ~ 6 tons (standard cylinder, including the cylinder head) cylinder head rough weight of about 1.7 tons ~ ~ 1.8 tons, cylinder weight of about about 4.2 tons. After processing, the cylinder head weighs about 0.5 tons to 0.6 tons, accounting for the proportion of about 65% to 70% head (excluding scrap, scrap accounted for about 10%, blank cylinder head and iron) accounted for about 30% ~ 35% blank cylinder head, accounted for the proportion is about 40% recycled waste, scrap iron accounted for under foot material proportion 60%, enterprises can not return direct sales (currently, only production enterprises can use recycled scrap iron). Total iron blank ratio is about 15% ~ 18%.
Q:How coal is turned into coke in the coking chamber
The kiln chamber wall set to continue burning, and some heat incoming kiln (indirect heating). High temperature gas flow (800 DEG C, is mixed with coal pyrolysis, chemical products into the fabric of unburned.
Q:What is the difference between coke and coking coal
Coke: a solid fuel, hard, porous, high calorific value coal. High temperature carbonization made for ironmakingTypes of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.
Q:How much coke oven gas is produced?
From the production equipment and technology of the popular view, a ton of coke oven gas produces about 400 cubic meters, of which about 200 cubic meters of coke oven returned through the pipeline used for coking heat source, the remaining more than and 200 cubic meters was emptying, "or the lantern".
Q:Coke is how to produce, what is its purpose?
Under the condition of air isolation, the bituminous coal is heated to 950-1050 DEG C, which is finally made into coke by drying, pyrolysis, melting, bonding, solidification and shrinkage. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.
Q:Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between
3, calcium carbide coke is conductive body and a heating body for electric arc furnace of coke in the production of calcium carbide. Calcium carbide with coke into the electric arc furnace, arc heat and heat resistance at high temperature (1800-2200 degrees Celsius) under the action of complex reaction and lime, calcium carbide formation in the molten state (carbide). The generation process of the following reaction type available:CaO+3C - CaC2+CO-46.52KLCalcium carbide with coke should have low ash, high reactivity and high resistivity and grain size. The secondary characteristics, but also try to remove the powder and reduce moisture. Its chemical composition and particle size should meet the following requirement: >84% <14% fixed carbon, ash, volatile <2.0%, sulfur
Q:What are the requirements for the quality of coke in blast furnace smelting
Coke is a solid product of high temperature carbonization, the main component is carbon, is a crack and irregular pore structure (or porous). The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke). The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke.
Q:Coke in the steelmaking process in the end is what
3) skeleton: smelting process in blast furnace is gas rise and decline occurred in the opposite charge of movement and interaction, the core permeability is the key operation of blast furnace. In the upper column, gas flow distribution of coke layer; in the middle of the column material, the coke from the skeleton effect, support has been melting the iron ore, the normal gas rise; in the lower column, high temperature in the solid massive existing coke and has become liquid hot metal and slag mixed together, become loose skeleton gas rising and falling iron and slag.
Q:What is the use of coke
From the distribution of coke production in China, the distribution of coking enterprises in China is unbalanced, which is mainly distributed in North China, East China and northeast china. Three, the use of coke coke is mainly used in blast furnace ironmaking and copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting furnace, reducing agent, heating agent and the role of the material column skeleton. The use of coke instead of charcoal in the blast furnace has laid the foundation for the large-scale development of modern blast furnaces and is a major milestone in the history of metallurgy. In order to achieve better technical and economic indexes of blast furnace operation, the coke (metallurgical coke) must have proper chemical and physical properties. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength, but requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range