EXACAVATOR CLG904DIIIA, GOOD QUALITY AND BEST PRICE
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
SPEC
Operating Weight | 4,000kg |
Bucket Capacity | 0.058-0.3m³ |
Engine | Yanmar 4TNV88-BSBKC |
Gross Power | 27.2 kW (36.4 hp) @ 2,200 rpm |
Net Power | 25.2 kW (33.8 hp) @ 2,200 rpm |
Peak Torque | 141.7N•m@1320rpm |
Travel Speed | High:4.4km/h, Low: 2.7km/h |
Drawbar Pull | 31.8kN |
Swing Speed | 11.1rpm |
Arm Breakout Force, normal, ISO | 17.6kN |
Bucket Breakout Force, normal, ISO | 28.3 kN |
Maximum Dig Depth | 3,100 mm |
Reach at Ground Level | 5,220 mm |
Depth of 8’ Level Bottom | 2,620 mm |
Maximum Dig Height | 5,000 mm |
Dump Height | 3,600 mm |
Maximum Dig Depth of Vertical Wall | 2,040 mm |
Overall Lenth | 5,150 mm |
Overall Width | 1,600 mm |
Overall Height | 2,500 mm |
FEATURES
1. A water proof ring prevents rainwater from entering the swing bearing
1. Vertical installation of the main valve makes it quicker and more convenient to disassemble hoses
2. The improved pipeline layout also leads to less problems and easier maintenance.
3. Integrated solenoid valve with pilot valve block placed at the front of the main control valve. This design increases space with in the machine, opening the front cover allows for convenient maintenance of pilot valve block
1. Quieter noise levels more comfortable for operator, and better for environment.
2. Great capability in low speed conditions, outstanding torque ensures there is no stalling.
3. Elevated water tank makes it easier to check and maintain, the shorten pipe protects against freezing in cold environments..
4. Enhanced vibration reduction lowers shaking and is better for the operator and machine.
- Q:I wanted to be a petroleum engineer due to its high salary, but am unsure if it's worth it.Is it worth it? Is it fun?Aeronautical engineering doesn't have a salary as high, but it seems like a fun job.I am hard of hearing and wear hearing aids. I suppose both jobs would accept this type of person.Which of those jobs has a better hiring rate?
- Petroleum engineers do not have any thing to do with the design of machinery. Their primary interest is the underground reservoirs that contain oil and gas. They can spend some time around a drilling rig but they do most of their work in an office. Having hearing aids should not be a problem in terms of employment. You need to realize that picking discipline for salary is the wrong thing to do for two reasons. One you should always work at something you enjoy and are good at. Two, just because a given discipline has a higher average salary doesn't mean you will be one of the engineers that earns that higher salary.
- Q:Or would you remain stoically silent?
- Crushed by heavy machinery? Hah! My manly ribcage can not be crushed.
- Q:What's the level of the construction machinery in China?
- First, the team is definitely not, but it takes up most of the second team.
- Q:What are it's advantages and disadvantages in both commercial farming and subsistence farming?
- Good question Advantages of Commercial Farming Can generate cash, the products are therefore intended to be marketed for profit. An extra profit is needed to fund the next cropping activities. A positive impact on an economy, unemployment decreases more people and resources are fully utilize and as a result government generates more revenue through taxes which makes an economy of a country more powerful. Disadvantages of Commercial Farming is that only certain crops would be produce as it has more money value. Peoples' would not get a variety to choose. Advantages of Subsistence Farming The people who worked there can get the food and it is a quite cheap as compare to Commercial Farming where excess of money is required to operate the farm whereas in subsistence farming you just have to buy a little piece of land and little money to be spend on the crops. Disadvantages are there is no proper source of income in this farming system. Difficult to buy seeds for new crops due to a cash-flow problem. A farmer has to work hard to yields the crops. Hope this helps and I think you are a student, if is it so then I am sure with this answer you would get 100% :)
- Q:i want to sell an unused candle maker
- The questions need to ask yourself are: - Is the weight of the product and corresponding freight cost going to be prohibitive for anyone bidding internationally or far from my local area? - Is my product too specialised for OKorder? - do I need a large national/international group of prospective buyers to ensure a sale? You may in fact be better off finding a more specialised sales platform. Good luck.
- Q:that question is related to basic fluid machinery... the reaction turbines, when running are full of water that is the water is all around the vanes but in the analysis we use to draw a single line representing the inlet velocity why?????
- resultant force acts on the line
- Q:What are the five major cost components of the project cost?
- Material cost means the amortization of the raw material, structural parts and semi-finished products, auxiliary materials, and turnover materials and the rental costs of the raw materials, components, fittings and semi-finished products, auxiliary materials, which are included in the budget. Mechanical use fees refer to the contents of the quota included in the budget, the mechanical use fees incurred in the construction process and the rental fees of the construction machinery leased by the outside units, and the fees for installation, disassembly and entry and exit
- Q:I'm planning on getting a machine for $65000, I've never had any loans or buy a new car. My credit scores are not good in 2 bureus are 670 and Expirian is 570. I'm trying right now to improve my credit scores but it's not easy, takes time. I applyed in City Financial for a personal lon (not that I need one) but just to try to get the loan and pay it off. But I was denied. So I decided to use more of my credit card so it will show in my cradit report that I had a bigger loan ($7000). And then pay off the credit cards. If you have any ideas what shoul I do I'll appreciate you answer. Thank you in advance.
- It will be very hard to get a loan for 65,000 with little credit history. What will make it even harder is if you can't show income. The manufacturer of the equipment may have finance available through them, since if you default, they can take back possession. Most banks will consider a piece of machinery a poor securitization option because there is such a limited market.
- Q:what are the methods to depreciate machineries ?
- Straight Line Depreciation Declining Balance method Double Declining Balance method
- Q:I am restoring an older , but good piece of machinery. It sat for many years, so it's really really dirty and showing some rust and paint wear. I do not want to wash it and get water all over it so it starts rusting the gearing, and tooling surfaces. What do you recommend to start getting this beast clean, so I can work on it without getting really, really dirty? Is there a spray or should I use something like ...WD-40? How about the chemical RESTORE they show on the $19.95 TV Ads??? Used to restore the faded paint on a car or clean the headlight lens from oxidation??
- There are degreaser products, but those are fairly aggressive and intended for really gummy congealed lubricant removal. WD-40, while less aggressive, is still a pretty good solvent as well as a light lubricant. If you need a lot of it, they sell it in 1 gallon cans (and probably larger sizes for industrial use), and they have pump sprayers to use with that size. I think a product for use on headlights or faded paint would be more of a polish than a degreaser, so that would not be appropriate unless you're trying to clean up a plastic viewing window or some such plastic guard, shield, etc.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
EXACAVATOR CLG904DIIIA, GOOD QUALITY AND BEST PRICE
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 100 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords