ER1100 aluminum TIG welding wire (TIG ROD)

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT or LC
Min Order Qty:
1 m.t.
Supply Capability:
500 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specifications

1)Pure aluminum -99% min 
2)Excellent corrosion resistance. 
3)High thermal conductivity and electrical conductivity. 

Class: ER1100

AWS: A5.10

Conforms to Certification: AWS A5.10                 ASME SFA A5.10

Weld Process: Tig (GTAW)

AWS Chemical Composition Requirements
Cu = 0.05 – 0.20Al = 99.0 min
Mn = 0.05 maxSi + Fe = 0.95 max
Zn = 0.10 maxBe = 0.0003 max
Other = 0.05 each – 0.15 total

Available Sizes:
Upon Request, call for more information

Application
Type ER1100 can be used to weld base materials types 1060, 1070, 1080, and 3003.

  • Welding Filler Wire

  • Heat Exchangers

  • Food Handling Equipment

  • Rivets

    Main Features

The proper choice of aluminum filler metal mainly depends on the base metal properties to be achieved and welding technique. Post weld cracking, corrosion resistance and behavior under elevated temperature also need to be taken into consideration. Cracking usually can be minimized by choosing a filler metal alloy of higher alloy content then the base metal.

Deposited Chemical Composition % (Typical)
Deposited chemistry is influenced by many factors so no typical analysis can be reported.

Deposited All Weld Metal Properties %
As-Welded

Deposited all weld metal properties are influenced by many factors such as weld process used, so no typical weld metal properties can be reported.

 

Pictures:

 

 


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Construction and technical parameters of LED lamp
Voltage and current: voltage and current are also very important basic parameters of LED bulb. The voltage of the grid in different countries in the world and the voltage used on some occasions are different. The common voltages are 12V, 110V, 220V and 85v-265v. The current into the input current and lamp current. First: input current: can be tested by power supply, different power is different, the instrument shall prevail. Second: lamp current: general high power is between 300mA to 320mA-. A large current of the LED light attenuation effect, so the current stability is also very important. Lamp current and voltage can not give too much, otherwise it will seriously affect the service life of the LED lamp.
Q:What material is it fill aluminum pot
Fill the pan trachoma usable riveting filling method: according to the size of sand with aluminium rivets, aluminum wire
Q:Microdetector internal tied aluminum wire is then used by the eddy current, electromagnetic damping brake?
Aluminum wire is closed loop. The loop is in opposition to the action of the coil. It's not eddy.Current scoring, permanent magnets, and coils.
Q:Why is aluminum wire difficult to react with dilute sulfuric acid by hydrochloric acid reaction?
And dilute sulfuric acid seems to have passivation phenomenon, will prevent further reactions
Q:How to bind overhead wires?
Mainly refers to the overhead line overhead line, set up above the ground, with the transmission line transmission line insulator fixed to transfer power in upright on the ground on the tower. The erection and maintenance more convenient, low cost, but vulnerable to weather and environment (such as wind, lightning, ice contamination, etc.) the influence caused by the fault at the same time, the entire corridor occupied land area is more, easy to cause the electromagnetic interference of the surrounding environment.
Q:LV how to solder, seek expert advice, please everybody
First of all, strongly recommend the purchase of a dedicated aluminum wire feed tool, a kit will contain the following items:1. non metallic lined tubes - designed to minimize wire feed friction2. U grooved drive roller - used to prevent breakage or deformation of soft aluminum wire. These drive rollers don't scratch aluminum wires like V groove rollers. The use of V groove roller, will make the wire scraping lining pipe plug, causing wire feed failure.3. inlet and outlet guide device - designed to avoid wire scratches.4. contact contacts - use a larger diameter opening in the welding head of aluminum material, because the expansion of the aluminum wire is more expansive than that of the steel. Therefore, the size of the contact head for aluminum wire is small enough to maintain electrical contact and sufficient to allow expansion.
Q:How many coarse aluminum threads does a 4 kW single-phase motor require?
Specification of cable selection 1. is determined using the specifications of wire and cable (conductors), should consider fever, voltage loss, economic current density, mechanical strength and other conditions. According to the experience of low-voltage power line due to the load current is large, so generally according to the heat conditions section, and then check the voltage loss and mechanical strength; 2. low-voltage lighting line because of its high requirements of voltage level, can according to the allowable voltage loss section, then checking the heating conditions and Mechanical strength; 3. on high voltage lines, first according to economic current density section, and then check the heating conditions and the allowable voltage loss; 4. high-voltage overhead line, its mechanical strength is also fulfilled. If the user does not have experience, you should consult the relevant professional units or people.
Q:Electric cooker bladder low leakage to trap
Honeycomb liner refers to the thermal effect of the liner, designed for honeycomb arrangement, this design can allow more heat convection, more efficient than traditional flat liner.
Q:How about the difference between aluminum wire and copper wire?
The aluminum wire is white, the copper wire is yellow, and if the copper is rusty, it will be green
Q:What are the specific effects of a fuse in an appliance?
A fuse is a safety device for electrical wiring and electrical equipment.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range