eps foam sandwich panels
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
EPS Sandwich Panels
EPS Styrofoam Sandwich Panel
Structure | 1.)Steel sheet for both the surface 2.)Explosion polystyrene for the core material |
Steel Sheet Thickness | 0. 3~0.6mm,PPGI |
Panel thickness | 50mm~200mm,common thickness is 50mm,75mm,100mm,150mm and 200mm |
Effective width | 1.) 950/980mm--- Corrugated Roof Panle 2.) 950 / 1150mm---Wall or Ceiling Panel |
Length | Custom, less than 11.8m |
EPS density | 10~20kg/m3 , Normal is 12kg/m3,14kg/m3 |
Color | Regular is White/Red/Blue, also can be Custom |
Heat conductivity | ≤0.045 W/m.k |
Parts | Steel covered-sides for easy to connect one piece to another, easy to assemble Film covering to protect the steel of panels |
lifetime | 20~25 years |
Character | Light in weight, heat insulation, fireproof and waterproof, fast installation ,environmental |
Use | for all kinds of prefabricated buildings’(warehouse, workshop, garage etc.) roof and wall for existing buildings, can be exterior protected construction or bearing structure |
Packing | Flat packing in shipping Container or according to your demands |
Structure –The EPS panel is constituted by two sheets and middle condensed polystyrene foam board. The upper and lower surface of the panel can be different kind of metal sheets.
Features:
1)Weatherability
EPS covered with fiberglass alkali-resistant mesh and special glue and cement, it has particular weather resistance and durability. It will not crack, bubble and peel when being used in ultraviolet radiation, moisture, salt, heat and cold insulation for long time. Our products are durable and can resist the affects of rain, snow, wind, frost and or other bad weather.
2)Heat insulation and Fireproofing performance
Expandable polystyrene foam incorporated into the panel design shall provide a sufficient thermal break to ensure non-conductivity of temperature between surfaces. The building can reach the standard of energy-saving design without EIFS. It is ideal material for construction in both tropical and frigid countries, it will bring you a comfortable and safe habitation. The core of new self-insulation composite wall material is fireproofing EPS. The completed panels with finished surface are un-inflammable and its fire prevention performance reach B class of GB8624 standards according to testing results from National Center for Quality Supervision and Testing of Fire Building Material.
3)High supporting capability
Individual panel size and configuration is dependent upon project design requirements. The integrated galvanized antirust steel studs for strength is pre-inserted in the wall, and strength of our system depends on the specification and space of steel studs.
4)Installing easily and quickly
It is easy to install with some bonding glue. Our building systems create a single, one-piece corner or T-shaped connecting sections, eliminating the difficult problem of joints between two walls. Wall section is a fully structural, insulated system of factory made sections are easily to assembled on site. Several workers are enough for whole construction, and only need 1/3 time of traditional construction.
5)Excellent strength and durability
Our building systems is customized to the exact architectural drawings, design and specifications and can also be used for almost all kinds of foundation wall system as well as structural floor, wall and roof systems. Formed steel studs shall comprise the integral framework of all panels and sections. It provides lasting strength. Our system and panels shall meet or exceed all code requirements. The houses can be installed without other frame and make the building durable enough.
6)Wide applications
Our building systems could be widely used in exterior wall and partition of villas, residential houses, workshops, cold storages, security lodges, civil engineering, mobile toilets, rubbish centers, transformer substations, sentry boxes and other prefabricated houses.
7)Low Cost--Industry and trade integration
We have our own factory with several production lines manufacturing the panels and sell them through our own trading company. So we can give you the most competitive price and control the delivery time for your benefits!
- Q:What is the acceptance criteria for rock wool sandwich panels?
- 1) upper and lower surface: the use of galvanized color steel plate, the thickness of 0.4-0.8mm. According to the specific requirements of customers, can also be used galvanized steel or galvanized steel plate. The steel plate is first molded by a molding machine and is compounded with the rock wool factory. ? 2) Yanmian core material: the use of density of 120kg / m yan rock block staggered laying, the fiber perpendicular to the sandwich plate on the upper and lower surfaces, and close contact to enrich the sandwich panel of the entire vertical and horizontal. The combination of rock wool and rock wool and the upper and lower steel plates through the high-strength foaming agent to form a whole, sophisticated production process to ensure that the high-density rockwool insulation and metal plate between the inner wall can produce poles Strong adhesion, so that the rock wool sandwich panel has a very good stiffness. ? Wujiang City Linxue purification Choi Board Co., Ltd. is the China Electronics Society Clean Technology Branch members. Commitment to various types of purification decoration, clean air-conditioning works, hydropower engineering facilities supporting the design, installation, commissioning through-train service.
- Q:Explosion-proof rock wool sandwich panel how to do waterproof
- Do a good job of waterproof coating treatment, the other is, you can in its surface, composite layer of metal, so you can better waterproof moisture Oh.
- Q:Color steel sandwich panel wall, you can directly spray really stone paint what is the practice
- According to the following construction methods to achieve good results: 1, in the sandwich panel (plate) on the gap to be caulking. It is recommended to use the home of the heart of the card to worry about toughness to fill the joints, and then paste the seam (master understand). 2, if directly in the sandwich panel (plate) on the batch of putty powder or spray paint really easy to drop off the phenomenon of paint, the first primer, it is recommended to use the home of the board of people worry-free putty scraping again There are), to be dry and then approved scraping putty powder. 3, spray really stone paint.
- Q:Color steel sandwich panel can do the widest, can be more than rice
- Can be a maximum of 1.1 meters
- Q:Flammable and toxic "" "", how long life?
- There are two types of polyurethane foam and polystyrene foam!
- Q:Is there any profit in the rock wool sandwich panels?
- f course, ah, foam sandwich panels are not allowed to use the fire department, optimistic about the Yanmian sandwich panels, glass wool sandwich panel market prospects, Shandong Zibo permanent company is the largest sales of Yanmian sandwich panels manufacturers, Steel sandwich panels, save money is the last word!
- Q:Is the interior material of the rock wool sandwich panel fluffy or compact?
- This is related to bulk density. Big enough to be dense, you can knock to listen to its voice.
- Q:What is the difference between the sandwich panel and the composite board?
- Metal sandwich panels are made of two-layer metal panels (or other material panels) for the surface material, insulation materials to do the core material, with adhesive composite or direct foam curing molding compound. Building insulation sheet industry in the insulation board refers to the sandwich panels, composite board is popular called. Metal composite panel in the industry refers to a layer of metal plate covered with another metal plate, in order to reduce the use of the effect (corrosion resistance, mechanical strength, etc.) under the premise of saving resources and reduce the cost of the effect.
- Q:What is the rigid polyurethane sandwich panel
- This is a Caigang sandwich panel, can be used as a roof structure of the roof and wall panels, with a large stiffness, than the pressure plate stiffness, thermal performance is also very good, and the polyurethane sandwich panel fire Performance is also good
- Q:Can Caigang sandwich panels cover cottage? Is it possible to install it?
- Can, need color steel sandwich panels to find Wujiang City, the LEADER air conditioning purification equipment engaged in color steel technology research and production, sales manufacturers
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
eps foam sandwich panels
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords