Epoxy Antistatic and Oil-resistant Paint

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Product Description

Intended Uses

Suited for interior surface of tank loading crude oil gasoline, kerosene. Gas oil and as anticorrosive and antistatic coating. Also be used in the site required resistance to static. It forms a coating with excellent adhesion. Flexibility. Impact resistance. Good oil and corrosive resistance aswell as good antistatic property.

Product Description

Light gray, Using metallic oxide modified micapowder as conductive medium.

Product Information

Volume Solids:75%
Dry Film Thickness:100 microns equivalent to 133 microns of wet film
Theoretical Coverage:187g/²
Practical Coverage:Allow appropriate loss

Application Details

Mix Ratio A: B=20: 3(by weight)
Method of Application:
Airless Spray: Recommeded-Tip range: 0.53-0.68mm; Total output fluid pressure >17.6MPa
Brush or Roller: Recommended
Conventional Spray: Not Recommended
Thinner X-7
Pot Life 25ºC:4-6h
Storage Life One year
Drying Time
(Substrate Temperature 25ºC) Touch Dry ≤ 2h Hard Dry ≤ 24h Overcoating Interval(above10ºC):Minimum 24h Maximum 5days

Storage and Handlina

Storage : Store in cool and dry conditons
Pack Size A: 16Kg in 20 liter container
B: 3Kg in 4 liter container
Flash Point: 22ºC(after mix)
Specific Gravity : Approx 1.40Kg/L

Specification and Surface Preparation

Remove rust to SA2.5 and then integrall coating is conducted

Subsequent Paint/Limitations

Recommended coat: Spray two coats with high-pressure airless spray, for the sake of 200 microns of dry film thickness. Preceding coat: Inorganic zinc silicate primer etc.

Safety Precautions

This product is a kind of solvent-based paint. Ln order to avoid danger or accident, minimal safety precautions, as follow, should be done:
The paint contains volatile solvent and is flammable. So must keep away from sparks and open flames. No smoking at application site. Effective precautions(such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc)also should be done so as to avoid producing sparks. Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. Ln order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in generaLTherefore, 200m³ Of ventilation quantity per 1 Kg solvent(according to the solvent)is necessary.

Protect skin and eyes, and avoid touching with paints(Recommend to wear working clothes, gloves eye protection, face masks, barrier creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. Ln case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Paint, PE and, PU paint, what is the difference
Unsaturated resin coating (PE). Its advantages: 1, with good hardness, can reach 3H above 2, the finish can make a high gloss 3, wear, acid, heat resistance 4, full Very high degree
Q:What is the difference between powder coating and waterborne paint?
Powder coating one-time coating thickness is generally 60 ~ 80u, the liquid is difficult to do;
Q:When the tie-dy, can the direct pigment make the same effect as the reactive dyes?
Dyeing process, the chemical reaction between the dye and the fiber, and fiber-like functional groups on the different, so there is a big difference. Dye on the fiber by the above formula, the dye and fiber combination to generate a new overall.
Q:What is the difference between water-based paint and oily paint?
Before dilution with water is diluted with diluent, water is not compatible
Q:What is the difference between active printing and paint printing?
Active printing is the use of reactive dyes to penetrate into the fabric, and the resulting printing. Paint printing is the use of paint covering the fabric above, and the formation of the printing.
Q:What are the types of polymers that are classified by performance and use?
Plastic - at room temperature has a certain shape, the strength of the larger, after the force can occur a certain deformation of the polymer. According to the behavior of heat can be divided into two categories: where the heat can be plasticized and softened, after cooling and solidification forming, that is, with the temperature changes can be repeated denaturation called heat shrinkable plastic, such as polyethylene, polystyrene ; After heating plasticized softening and chemical changes and curing molding, cooling and then no heat plastic deformation known as thermosetting plastics, such as phenolic resin, epoxy resin.
Q:What is the dilution of acrylic paint, how to save after use?
A high degree of wine can be diluted with water can also be sealed
Q:Decoration, paint how to distinguish between paint and varnish?
Coated on the surface of the object can form a protective, decorative or special properties (such as insulation, corrosion, signs, etc.) of the solid-state coating of a class of liquid or solid material collectively. Most of the early to vegetable oil as the main raw material, it is known as paint. Now synthetic resin has been replaced by most or all of the vegetable oil, so called paint.
Q:Is the pigment poisonous?
In all colors, red, yellow, white, blue, green, black 6 are basic colors, other colors are deployed by them, and white, yellow, red, green 4 colors contain lead dioxide, Arsenic trioxide and other toxic substances. Water, powder, advertising color 3 kinds of pigments, were squeezed into the porous plate, and then dropping two drops of sulfuric acid, respectively, the results, sulfuric acid dissolved in the pigment, which shows that sulfuric acid and pigments and other heavy metals in the reaction The In other words, this chemical test proves that the pigment does contain toxic substances such as lead. Hope to adopt, thank you.
Q:What is the difference between the pigment and the pigment in the paint?
Pigments and physical pigments are special solids that are dispersed in the paint to impart certain properties to the paint. These properties include color, hiding power, durability, mechanical strength, and corrosion resistance to metal substrates. Among them, the pigment is mainly for the adhesive to provide color and hiding power, but also need to meet the mechanical strength and corrosion resistance and other requirements. Pigments can be divided into two kinds of inorganic pigments and organic pigments. In the paint formulations, mainly the use of inorganic pigments, and organic pigments used for decorative coatings. Most of the body pigments are white powder, no actual function (color strength or hiding power), but has increased the thickness of the film, improve the durability of the film and reduce costs and so on. Color, color fastness, tinting power and hiding power are inherent properties of pigments, which are related to the structure and composition of pigments. The crystal morphology, particle size and shape of the paint on the luster, paint storage during the stability of the pigment and the base material on the wetting of the pigment surface have a greater impact. In the paint industry, the use of grinding or high-speed dispersion method is usually used to disperse the pigment evenly in the paint system and keep it in a suspended state or easily dispersed after settling. Therefore, the paint is concerned, the pigment is a very important auxiliary material.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range