Epistar 5M Smd5050 Rgb Blister Kit Led Strip

Ref Price:
Loading Port:
Shenzhen
Payment Terms:
T/T
Min Order Qty:
20 Sets set
Supply Capability:
10000 Sets Per Month set/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

General Introduction

smd5050 RGB blister kit led strip  

 

Specification

LED TypeLED QTYPower(w)Voltage(v)ColorChangableWL/CCT(nm/K)
 SMD5050 30LEDs/M7.212 RGBYES  RGB

 

Features
1. We suggest you use the products under the required temperture,(working temperature:-20°-40°,storage temperature:--20°C-80°C)and make sure the voltage accord with product specification.

2. For product shell we use ABS platic,anti-corrosion,non-discolouring,PCB is made of half a glass fiber and fire prevention material,good hear dissipation,low power consumption.

3. Our light sources are all packed with silicone glue,under rated conditions it works 1000hours and without light failure,and the lifespan is more than 50,000 hours.

4. In order to fix the single led module w can stick 3M glue back and install screw,fixed way can be chosen by yourself,each way is convenient and quick.

5.Porducts are glued by transparent or milky glue,the protection grade up to IP65,fully comply with outdoor insallation use.

Application 
1. Advertising signs:back light/arcylic/glowing words.

2. Interior decoration:shop/store/car decoration/corridor lighting/furniture decoration lighting/window decoration.

3. Outdoor lighting:the edge lighting/decorating building/mark lighting/sign lighting/underwater engineering lighting.

4. Atmosphere lighting:the bar/KTV/coffee shop and leisure entertainment.

Packaging & Delivery

 

Package:

1 x Box

 

Delivery:

Shipping Service

Estimated Delivery Time

DHL

2-8 business days

FedEx

3-8 business days

TNT

2-10 business days

UPS

1-7 business days

EMS

6-14 business days

ePacket

7-12 business days

China Post Air Mail

7-15 business days

China Post SAL

14-30 business days

By sea

30-40 business days

1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.

2. "Business days" means Monday-Friday, excluding holidays.

3. DHL and UPS cannot ship to military or P.O. boxes address.

4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us. 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Which of the 12 volt LED light band and 220 volt LED lamp is brighter? What's the difference in electricity costs? Want to use it in the mall counter, 12 volts
12V is commonly known as low voltage line, and 220V is high voltage line.A few years ago, high voltage line technology is not mature, low voltage line can be broken, a chip at worst, in series near the other 2 (3 string). And then the high voltage line is bad, one will be bad on the whole meter.Later, the high voltage line technology mature, and now also three chips in series, pay attention to the procurement, ask the relevant personnel, do not buy the oldest high-voltage wire products on it. When I was 12, the hotel project was still using 12V, and now I've switched to 220V altogetherBrightness of the big difference, cheap 5-6 meters per meter (I have seen the cheapest, 2 meters a meter, no warranty), relatively bright manufacturers, ex factory price is 13. 5050 patch specifications, if you use high brightness chip wafer. (it's hard to find on the market.)
Q:Is the LED belt with a constant voltage transformer or a constant current transformer?
The LED light belt is made of a constant current transformer. Because the life of LED is only affected by the current, the power must be constant current.
Q:Led how to connect the light belt?
If you buy high lights, then only need a connection head on it; if you are buying a low-voltage lights, need to use a power converter, high voltage into low voltage, and then connected with lights, it will light up!
Q:The problem of residual light in LED lamp after power failure
In fact, it is not the induction voltage, but the voltage of the alternating current fire line to the ground. In fact, this phenomenon occurs in fluorescent lamps. In general, as long as the switch off the fire line, this phenomenon will be eliminated.
Q:How to make the effect of LED light belt fixed?
This has something to do with the controller. If you know the principle of his chip, it's an effect to short-circuit a PIN directly
Q:Series parallel Led light band problem
It depends on the power supply voltage of your lamp belt. I don't know what you're using. If one meter is as long as 7 meters, it doesn't matter. As for the principle of luminescence, they are the same. But sharing the same transformer, that is, the power supply, must be the same as the two required supply voltage, otherwise it is easy to burn the lamp belt.
Q:LED current increases beyond 20MA, or when 30MA-50MA has consequences for LED lights?
The high power LED does not matter, but the straw hat, like 5mm small LED lamp is fatal, usually these small LED rated current is 20mA, a do make it work on the 15--18ma, you need to 30MA-50MA, it is early light oh, quickly over the
Q:How many meters can the 250W transformer carry with the LED light belt?
This depends on the specific product specifications, can not be generalized. Generally speaking, the 3528 series LED lamp belt has the longest connection distance of 20 meters, and the 5050 series LED lamp belt has the longest connection distance of 15 meters.
Q:How do I connect the two LED light bands?
Connect two LED lights, you need to see what kind of LED light belt, and some light belt itself has reserved lights, with serial plug, they can be directly inserted together. Some light belts must use separate power adapters, which are not directly connected in series. They can only be placed together and powered separately.
Q:Troubleshooting of LED light belt
Mainly from the following aspects to identify:1, look at solder joints. Regular LED lamp manufacturers with LED light band produced by SMT patch process, produced by solder paste and reflow soldering. Therefore, the solder joint on the LED light band is smoother and the solder flux is not much, and the solder joint is in an arc shape extending from the FPC pad to the LED electrode.2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.3. Look at the cleanliness of the surface of the LED lamp. LED band produced by SMT process, its surface cleanness is very good, can not see what impurities and stains. Hand soldering process to produce a cottage version of the LED lamp band, no matter how the surface cleaning, will remain stains and traces of cleaning.4. Look at the packing. The regular LED lamp belt will be packed with an antistatic coil tray, 5 meters roll or 10 meters roll, and the outer packing will be sealed with anti-static moisture proof packing bag. LED version of the cottage version of the band with recycled reel, there is no anti-static moisture-proof package, a closer look at the reel, you can see the appearance of cleaning labels left traces and scratches.5. Look at the label. Regular LED lights, bags and rolls have printed labels, not printed labels.6, look at the attachment. LED lamp with formal will attach instructions and specifications in the lights inside the boxes, also equipped with LED lights with a connector or card holder; not the accessories and LED lamp with copycat version of the box, because some manufacturers still can be saved.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range