Engineered Wood Veneer EV Wood Veneer 1250x2700mm for door

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
5000 pc
Supply Capability:
5000000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Specifications of Engineered Veneer Wood:

Engineered Veneer Unreal Color Wood for Door Skins and Plywood
1.Thickness:0.3mm-0.6mm
2.Grade:furniture,door and panel grade

Specification of Engineered Veneer Wood:

(1)Regular Size: Width640mm*Thickness 0.30-0.6mm *Length 2500mm

(2)Application: Can be used in interior decoration,furniture and music equipments , plywood or MDF , door etc

(3)MOQ: 500m2

(4)Packing:Wood pallet covered with plastic and fixed by iron belt

(5)Terms of payment: TT, LC at sight

(6)Delivery date:within 7—10 days after order confirmed. Your special order is also welcome

Other Information of Engineered Veneer Wood:

Dimension

2 x 8 feet/2.5mx64cm

Thickness

0.5mm/0.3mm

Grain

quarter cut/crown cut

Grade

Good quality

Moisture

To be 8%-10% at time of shipment.

Quality

Clear grain,  uniformity color,   no chew silk, no any defect

Usage

High grade Furniture, Restaurant and hotel decoration. Decoration board. Be pasted on MDF, Plywood. Other wood product, ect.

Package

Wooden pallet packing

Quanity fits in container

20’GP

35000m2

40’GP

65000m2

40’HQ

75000m2

MOQ

No requirements or can place a sample order to test our quality.

Delivery time

5-15 days on receipt of deposit.

Price terms

EXW, FOB, CIF, CNF.

Payment terms

By T/T, 30% for depoait and 70% is paid before shipment or after goods' inspection

 

Process of Engineered Veneer Wood:

Log Selection
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.

Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.

Drying
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.

Gluing
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.

Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.

Packing of Engineered Veneer Wood:

 Engineered Wood Veneer EV Wood Veneer 1250x2700mm for door

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the defects in plywood material?
Fracture split, end split The fiber is separated in the direction of the grain, usually starting from one end and extending through the thickness of the morning plate
Q:What is the best way to fix multi-layer plywood?
The usual length and width specifications are: 1220 × 2440mm, while the thickness specifications are generally: 3,5,9,12,15,18 mm and so on
Q:Four levels: Principal, First, Second, Third. Commonly used for one, two, three and so on
Quality grade for the premium, one, two, three a total of four, the indicator is similar to the MDF, but the intensity is much higher than the MDF
Q:What are the key points for plywood selection?
may be damp the hidden parts and high demand for waterproof occasions should consider the use of Class I or II plywood, outdoor use of plywood should be used Ⅰ class plywood.
Q:One of the commonly used materials for furniture is a wood-based panel
With the veneer after the wood by the direction of the criss-cross the composition of the slab, heated or not heated under the conditions of suppression
Q:What is a joinery board?
Blockboard core board should be the same species or similar properties of the tree species, water content of 6 to 12%. Core width is not greater than three times the thickness, do not allow a larger crack, holes and so on
Q:Poisoning diagnosis and grading standards
The diagnosis of chronic benzene poisoning is based on a long period of close contact with benzene occupational history, clinical manifestations are mainly hematopoietic inhibition
Q:The Decorative veneer veneer plywood grade classification
To remind manufacturers and other forms of consumer do not meet the requirements of China's decorative veneer veneer plywood standards
Q:Plywood in the decoration works how to use
Commonly used plywood type plywood, penta and so on. Plywood can improve timber utilization and is a major way to save wood.
Q:Plywood in the material defects?
race of the parasitic plant marks of parasitic plants formed by the parasitic plants or rotten plants penetrate the wood and the formation of small groups of small channels

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range