Order On-line Tracking
Specifications of Engineered Veneer Wood:
Engineered Veneer Unreal Color Wood for Door Skins and Plywood
2.Grade:furniture,door and panel grade
Specification of Engineered Veneer Wood:
(1)Regular Size: Width640mm*Thickness 0.30-0.6mm *Length 2500mm
(2)Application: Can be used in interior decoration,furniture and music equipments , plywood or MDF , door etc
(4)Packing:Wood pallet covered with plastic and fixed by iron belt
(5)Terms of payment: TT, LC at sight
(6)Delivery date:within 7—10 days after order confirmed. Your special order is also welcome
Other Information of Engineered Veneer Wood:
2 x 8 feet/2.5mx64cm
quarter cut/crown cut
To be 8%-10% at time of shipment.
Clear grain, uniformity color, no chew silk, no any defect
High grade Furniture, Restaurant and hotel decoration. Decoration board. Be pasted on MDF, Plywood. Other wood product, ect.
Wooden pallet packing
Quanity fits in container
No requirements or can place a sample order to test our quality.
5-15 days on receipt of deposit.
EXW, FOB, CIF, CNF.
By T/T, 30% for depoait and 70% is paid before shipment or after goods' inspection
Process of Engineered Veneer Wood:
EV is generally produced from Chinese Poplar logs, grown locally either by local co-operatives,
or in registered plantation areas. The light natural colour and soft grain definition of Poplar makes it wellsuited to the production of EV. The process of converting timber into EV starts with the selection of logs, following which they are bought to the mill for processing. The timber is trimmed, sawn to length and debarked. The logs are now ready to be peeled.
Peeling of the Logs
The logs are mounted onto a giant lathe. Within minutes the logs are peeled into rotary veneers. This is achieved by pressing a rotating log towards a large blade, thinly peeling a continuous sheet of veneer off the log. The veneer is dried, stacked and then graded. It is now ready to be dyed.
EV veneers can be dryed to a consistent colour to suit the market requirement. The raw veneer leaves are stacked into a stainless steel cage. Once completely loaded, the stainless steel cage is immersed into a pressurized, heated vat that is filled with water soluble dry. This system ensures that each leaf is given the correct amount of time to allow the dry to completely penetrate each individual leaf of veneer. Once the desired colour has been achieved, the leaves are unloaded from the vat, dried and given a final inspection before going to the gluing stage.
The gluing process is critical for the performance of the finished product. A layer of glue goes between each leaf of veneer, to bond the leave of veneer together. Once the stack has been laid up it is then put into a high pressure press to bond the leaves together, creating a large rectangular block.
Slicing of the Block
The block in now ready to be sliced into veneer leaves. Once the block has been produced, it is turned through 90 degrees, to present the end grain, then mounted to the slicing unit. The blade now runs across the end grain of the block, slicing thickness controlled leaves of veneer. The veneer leaves that are produced are approximately 0.4mm thick, and in 2440 x 1220 format. The veneer is now ready to be used as face veneer for Eucalyptus and Poplar core plywood products.
Packing of Engineered Veneer Wood:
1. Manufacturer Overview
|Annual Output Value|
2. Manufacturer Certificates
|a) Certification Name|
3. Manufacturer Capability
|No.of Employees in Trade Department|
|No. of Production Lines|
|Product Price Range|