Electronic Ballast 750W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 set set
- Supply Capability:
- 1500 Set Per Month set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Type |
Value |
Output power |
750W |
Input frequency |
50Hz-60Hz |
Current crest factor |
<1.5 |
Voltage |
220-240V |
Power Efficiency |
95%(Max) |
Material |
Aluminum |
Fan |
no |
THD |
<10% |
Lamp distance from ballast(max) |
15m |
Certificate |
CSA/CE/ROHS/UL |
Dimension |
385*205*105mm |
Max case temperature(T C) |
90°C |
Warranty |
3year |
2.Applications of Electronic Ballast 750W
Application for public lighting, like street lamps, marketplace, highway tunnel, public plaza,
theater, advertising and publication, industrial and mining enterprises, station dock, construction scene, horticulture and hydroponics
3.Package & Delivery of Electronic Ballast 750W
Protected with Polystyrene foam, Packaged by Export Carton/Pallet
- Q:How many watts is required for the 21W tube fluorescent lamp?
- Fluorescent lamp ballast is determined according to the power of the lamp. How large a tube is, how large a tube is,
- Q:What is the difference between a energy-saving lamp and a fluorescent lamp?
- The so-called energy-saving lamp is mainly used to see the same amount of electricity. With the same power, the older bulb is more efficient than the daylight With the same power, the bulb turns electric energy into light energy about 30 percent. And heat energy is 70 percent
- Q:What is the connection of the fluorescent lamp electronic ballast
- That's all right, you just need to pick up the butt, hehe, don't worry! ~ ~ ~ You met me this play electric ^_^
- Q:What is the difference between a transformer, a ballast, and a wave?
- Transformer - as the name implies, the voltage is either low or low. Ballast - generally refers to the fluorescent lamp startup and cooperate with the starter to produce flash, fluorescent lamp, after a limited current (is the current crackdown to live, don't call current too big).
- Q:Principle of inductor ballast starter
- Characteristics of the fluorescent lamp, lamp began to ignite need a high voltage, normal light allows only by small current, the voltage is lower than the voltage at the ends of the tube.
- Q:What capacitor is the c3 and c4 of this electronic ballast circuit board?
- From the photo, this is the polyester capacitor. 2A222j stands for 2.2 nF (2.2 nF = 0.0022 mu F), and pressure 100V. 3A223j says the capacity is 22nF (22nF = 0.022 mu F), and the pressure is 1000V. It is possible to measure the capacitance of the polyester by measuring the capacitance of other porcelain plates. Note the polyester capacitor in series with the lamp filament, which can easily break through the damage, causing the filament to be red but the lamp will not be able to initiate the fault.
- Q:The 25w ballast can match the amount of daylight light bulbs
- Now, that's one of the things that is very strict about matching two words; Not only the power must be matched but also the tube diameter of the lamp tube should be matched with the ballast, the flammable explosive places should be explosion-proof products
- Q:What happened to the electronic ballast 13003
- Could be supply voltage instantaneous had a high fever, possible temperature is too high, may the pipe itself is not good, may next to absorb high back pressure of diode is broken, which could offset resistance short-circuit, and so on, it depends on the situation in detail. I also had a ballast that burned two 13003, the ballast bad and the bad power tube.
- Q:What is the difference between a preheated ballast and a non-preheated ballast?
- A preheated ballast or cold start is when the bulb lights up and requires the filament to cool down to a certain temperature It is usually a low price for inductance ballast A non-preheated ballast or heat start-up is the ability to turn off the lights at any time without waiting Electronic ballast is usually more expensive
- Q:How do you determine the quality of a streetlamp ballast
- If online check several simple and practical way: 1, determine without leakage, feel with the hand, certainly does not work, if not hot ballast is bad above 2, a screwdriver top one close to the ballast, if you have any magnetic ballast suction screwdriver to account for the ballast is work.
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu, China |
Year Established | 2006 |
Annual Output Value | Above US$ 0.1 billion |
Main Markets | 20.00% Northern Europe 25.00% North America 55.00% China Mainland |
Company Certifications | ISO 9001 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 41% - 50% |
No.of Employees in Trade Department | 20 People |
Language Spoken: | English; Chinese |
b)Factory Information | |
Factory Size: | Above 50,000 square meters |
No. of Production Lines | Above 3 |
Contract Manufacturing | OEM Service Offered; Design Service Offered |
Product Price Range | Average |
Send your message to us
Electronic Ballast 750W
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 set set
- Supply Capability:
- 1500 Set Per Month set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords