Electrical Tape for Insulation Use of High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of KC71 Tape
• KC 71 is a self-amalgamating ethylene propylene rubber (EPR) tape used on solid dielectric cable for electrical insulation and jacketing in splices up to 69Kv and for building stress cones in terminations up to 35kV.
• The tape comes with a separator that is removed during the taping process.
• Its 0,76mm thickness and quick amalgamation facilitates a rapid, void free insulation build-up that is electrically stable and moisture proof.
• KC 71 is suitable for use with conductors rated at 90°C with an emergency overload rating of 130°C.
• The tape is also resistant to corrosion, chemicals and ultra violet light.
• KC 71 fully meets the Table 1 requirements for Type III tape in ASTM D 4388.
Dimensions of KC71 Tape
1” x .030” x 16.4'
25mm(width) x 0.76mm(Thickness) x 5m(length)
Consult us for other sizes
Specifications of KC71 Tape
Applications of KC71 Tape
• Electrical insulation and jacketing in splices of solid dielectric cable up to 69kV
• Building stress cones in terminations of solid dielectric cable up to 35kV
• Jacketing of indoor terminations
• Bus bar insulation and corrosion protection
• Jacket repair and restoration in all types of cable
• Moisture sealing applications
FAQ
Q1.Can we have the customized size tape?
A1:Consult us for other size
Q2:Is this Tape environmental-friendly?
A2:This tape is flame/arec resistance and environmental-friendly.
Q3:Can we have the sample/trail order to test quality?
A3:Surely we support the sample/trail order.
- Q:What's the raw tape?
- A white, opaque, membranous, polytetrafluoroethylene product, used as a supplement in plumbing and plumbing. Chemical name is PTFE, the product name is "PTFE" - raw tape. Raw rubber tape is PTFE - the commonly known as raw meal belt. The raw rubber tape is mainly used for the interface of hot and cold water supply pipe fittings, so as to enhance the tightness of the pipe connection, prevent the interface from leaking, and increase the leak proof function of the interface. At present, sanitary tapes are used in HVAC and water supply and drainage.
- Q:What is the difference between the effect of electrical tape and the rubber band?
- High tension self adhesive tape refers to the rubber belt. It is of great elasticity. It is used in the distribution box, grounding and bridge span.Electrical tape refers to the PVC material. Polyvinyl chloride film coated with pressure sensitive adhesive. Generally used in automobile maintenance, wire and cable terminals and intermediate joints insulation protection, acquaintance, color separation, sheath protection, wiring harness.
- Q:PVC electrical tape, and insulation tape difference
- Is actually about the same things, pVC is a polymer material, insulating many wires is PVC, the general said that with insulating tape yarn inside that, relatively speaking, PVC tape more resistant to high temperature, usually to 80 degrees.
- Q:What's the quota for PE membrane isolation layer?
- 0.4 thick polyethylene plastic film isolating layer, Beijing fixed no specific item, is paved with a layer of plastic cloth, can supplement the quota, labor costs by 0.5 yuan / square meters, according to the actual price included in the cost of materials.
- Q:How many or how many hours can the scotch tape decompose?
- The mechanical strength and electrical insulation are good, but its heat resistance is poor, softening point is 80 degrees, at 130 degrees, began to decompose, change color, and precipitation of HCI (chemical substances)
- Q:Why are bare wires tied with black tape?
- Black tape is often referred to as "PVC" adhesive tape, which ties bare wires because of the electrical insulation properties of the PVC electrical tape.
- Q:What's the difference between an electrostatic tape and an PVC tape?
- Polyester electrical tape, also known as Myra tape, is made of polyester film and solvent based pressure-sensitive adhesive, tensile strength, high temperature resistance, used in the manufacture of various transformers.
- Q:Toilet water pipe seam water seepage, with raw tape tight, can you?
- If the water leakage is not very severe, it is OK to apply the glass glue outside the pipe and the leaking place, but the premise is that when the glass glue is applied, the pipe must be dry and keep for more than 12 hours at least.
- Q:How to correctly use cold resistant anti freeze PVC electric adhesive tape
- And then winding, we all know, but it must be used to press it with your fingers, so as to reflect the advantages of thin film, you can rest assured that use it
- Q:What is PVC double sided tape?
- PVC double-sided tape, mainly refers to the PVC membrane as the substrate double-sided tape, double-sided coated elastomer pressure-sensitive adhesive or resin adhesive, acrylic pressure-sensitive adhesive, adhesive prepared on the PVC substrate with rolls or sheets.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Electrical Tape for Insulation Use of High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5000 roll
- Supply Capability:
- 100000 roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
