Q:Is there a socket on a socket?

f overloaded use will cause the wire to heat, reduce insulation, can easily lead to short circuit or fire accident, plus you are using the two socket plug extension to use,

Q:We use the power outlet are mostly single-phase three-wire socket or single-phase two-wire socket

The following two lines are the neutral line (the sign letter is "N" Neutral wire), FireWire (logo letter "L" Live Wire), the order is left and right fire, (the back of the plug against himself).

Q:Power outlet plug the correct connection FireWire, zero line, ground color

When installing the socket (including the three-phase air conditioning) to the fire line connected to the socket N, the zero line connected to the socket L, influential? Electrician said nothing!

Q:There are four (three-phase) plug

For household appliances (such as washing machines) with electrical shock to plug the power supply, use a socket with a switch to disconnect the power supply.

Q:How to plug a 16A plug on a 10A power outlet

because once the conversion socket bad contact, not only fever, and electrical appliances are also easy to damage.

Q:Is there a difference between air conditioning sockets and other sockets?

air-conditioning socket and the general socket of the insert is not the same distance. The thickness of the plain insert is 0.3mm, 30 silk

Q:What is the meaning of the female socket and male plug?

will not fall into the foreign body or the operation caused by electric shock accident. It is simple and easy to manufacture.

Q:How can the socket take the LN line if it will be reversed?

For the 220V three-pole (three-hole) socket, the Chinese standard is to be wired after the face of the socket jack

Q:Explosion-proof socket and the difference between ordinary socket

Ordinary socket made of ABS + polycarbonate alloy synthetic material, the socket copper is made of 1.0 mm pure copper plate and nickel plating

Q:10A plug can be plugged into 16A wall outlet?

0A plug into the 16A wall socket, from the load point of view there is no problem, but often 10A plug to less than 16A socket, so use does not meet the requirements.