Application of With CE 220V Electric Power Rammer
Widly used in Road construction, Bridge foundation, Building construction, Dam, Irrigration reservior.
It is used to tamp various gravel and sand, and also can be used to tamp asphalt, concrete and clay.
Main Features of With CE 220V Electric Power Rammer
1.Our tamping rammer is with advanced design, stable performance, strong tamping force, easy operation, safe using, wide application and high efficiency.
2. Secondary Filtration System, which can purify the air over 99%of dust and prolong the engine life;
3.Dust off corrugated box, which made in Germany and its service time is over two years.
4. Crankcase, which is made of aluminum alloy.
5.Oil Pointer, which can avoid excessive fueling and is by one-time precison casting.
6.Gears, which is made of 20 Cr-Mn alloy steel, forged by nitriding, the internal organizational structure mostly optimized, high strength and wear resistant.
Our Staff have engaged in the small-middle size construction machinery for over 10 years, with abundant experience we believe we can supply you with superior product quality and professional service.
Technical Parameters of With CE 220V Electric Power Rammer
- Q:What is the concrete vibrator?
- When mixing concrete pouring concrete components with concrete mixers, it is necessary to eliminate the bubbles, make tamping
- Q:What is the range of concrete vibrating rods?
- 1) When concrete is layered, the thickness of each layer of concrete shall not exceed 1.25 times of that of the vibrating bar. When vibrating the upper layer, it shall be inserted into the lower layer for about 5cm to eliminate the seams between the two layers.
- Q:What kind of vibrating method is used in the process of column concrete vibrations?
- And the step of dehumidating the concrete mixture discharged into the pouring compartment.
- Q:What are the requirements for vibrating concrete with vibrators?
- (4). The thickness of the stratified vibrations can not exceed 1.25 times the length of the rod, and when the concrete is vibrated on the upper layer, the head should be inserted into the next layer of concrete for 5cm deep so that the upper and lower layers are dissolved together to avoid seams
- Q:Concrete vibrations is not divided into artificial and mechanical two?
- used for all kinds of cast-in-place concrete engineering, external vibrator and vibration table is mainly used for concrete
- Q:What is the effect of concrete vibrations?
- Vibration rod inserted into the lower layer has been the depth of concrete should be not less than 5cm, strictly control the vibrating time, usually about 20 seconds, to prevent leakage or vibration
- Q:What is the rechargeable concrete vibrator?
- Work by the two holding the vibrator handle 4, according to the need to drag the work.
- Q:What are the types of concrete vibrators?
- Internal vibrator is also called plug-in vibrator (as shown).This vibrator is mainly used for large thickness of the concrete layer, such as piers, abutment foundation and foundation pile.
- Q:What are the safety procedures for concrete vibrators?
- The radius of curvature of the flexible vibrator of the plug-in vibrator shall not be less than 50 cm and shall not be more than two bends. When the operation is to be applied, the vibrating bar shall be sunned vertically and shall not be forced into the concrete,
- Q:What are the vibrations of cast-in-place concrete slabs?
- Mechanical vibration of concrete should be consistent with the following provisions of the editor
Our main products consist of various spraying machines and road machineries. Spraying machines mainly include putty, plaster, mortar, fire-proofing material, water-proofing material, water-soluble formula spraying machines, mortar conveying and grouting machines. Road machineries mainly contain road roller, tamping rammer, plate compactor, road cutter, cutting blade and power trowel.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
||50.00% Domestic Market
15.00% Southeast Asia
15.00% South America
5.00% Mid East
5.00% Eastern Europe
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||10,000-30,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range
||High and/or Average