Electric Foldaway Canopy Blinds
1.Electric/Motorized/Remote Control Foldaway Canopy Blinds Introduction
FCS skylight roof curtain is fabric folding single loop traction. The system consists of three parts of the
transmission mechanism, fabric and control system.
One end of the transmission part is the power end, the tubular motor driven the volume tube and rope which
fixed on the roll tube, so that a steel wire retractable; the other end of the transmission part to a fixed pulley,
change the direction through the pulley, so that both ends of a rope can be simultaneously fixed on the rope,
and wire rope is always kept taut.
When the width or length is too long , we can use the guide wire or rail guide system and other auxiliary device. And a wide range of fabrics can be selected.
2.Canopy Blinds Detail Information
Sun Shading Effect
Height & Width
Refer to our colors swatch or customized colors available
( Homemade and Imported )
50/63mm Aluminum Alloy
3/5 cm Aluminum
3.FCS Electric Folding Canopy Blinds System
FCS Roof Blinds System
Various of tubular motor could be adopted
steel wire transmission
The guidance track or steel wire is used
Standard and sunscreen fabric
Open and close model
Single open ( double open could be realized in certain condition.)
Wireless control, infrared control and manual switch etc.The group control and
other intelligent control mode also could be realized.
The fabric looks average wave as the roof blinds spread totally.
Large sunshade project, such as business center, Department store, gymnasium
4.The Motor System
Our tubular motor,adopting advanced technology,is developed by our own company.There are four
main parts of the motor:motor,break,gearbox,and limit switch.The motor can be widely used in
awning,roller blinds,garage,door,projection screen,etc.The main features as below:
1.Small,light and low noise,hidden.
2.Stable and durable limit switch makes sure the motor has excellent performance for long.
3.Thermal protector can make the tubular motor stop automatically when working temperature is over
130 degree.When the temperature goes down(about 15 minutes),the motor can work again.
4.Perfect shape,simple operation,convenient to assemble.