E Glass Woven Roving 800grs
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
1. E glass woven rovings 800grs are bidirectional fabric made by direct rovings in plain weave pattern.
2.Applicable for hand lay-up, winding and compress molding process,Suitable for manufacturing tank,boat,automobile parts and other FRP products.
1.Consistent thickness and excellent surface treatment.
2. Rapid impregnating and good compatibility with resin.
3. Uniform tension,high dimensional stability and making handing easy.
4. Good mechanical properties and high strength of parts.
Technical Specification
TEST ITEM | STANDARD | STANDARD VALUE | AVERAGE VALUE | RESULT | ||
AREA WEIGHT (G/M2) | iso3374 | 800+/-5% | 810 | yes | ||
WIDTH (MM) | iso5025 | 1250±20MM | 1250 | YES | ||
FABRICS COUNT (ENDS/10CM) | WARP | iso4602 | 18±2 | 18 | yes | |
WEFT | iso4602 | 18±2 | 15 | YES | ||
TENSILE STRENGTH(N/50CM) | WARP | iso4606 | ≥4000 | 4015 | yes | |
WEFT | iso4606 | ≥4000 | 4015 | YES | ||
moisture CONTENT (%) | iso3344 | <=0.15 | 0.1 | yes | ||
LOSS ON IGNITION (%) | iso1887 | 0.4-0.8 | 0.5 | yes |
FAQ
Package and Storage:Eech roll is packed by polyester bag,and then put into a cardboard box or plastic wowen bag.The weight of each roll is between 20 to 85 Kg, The rolls are to be horizontally placed and could be in bulk or on pallet.Optimum storage conditions are between the temperature of 5~35℃ and with the humidity between 35%~65%.The product should be used within 12 months from the time of delivery and remain in theiroriginal packaging until just prior to use.
- Q:What does fireproof bag used for ?
- It is made from cotton.
- Q:The difference between glass fiber plain cloth and glass fiber woven roving.
- According to the weight and width, there are many models including 200 g, 400 g, 600 g and 800 g. The width of 900, 1000, 1270 and 1400 are commonly used. The width is from a few centimeters to 3 meters and the weight is from 60 to 800.
- Q:Fiber has the difference between twist and twist
- Twist refers to the twist of a single yarn in a single yarn or strand. The inclination of the single yarn from the lower right corner to the upper left is called "S twist". The twist from the lower left corner to the upper right is called the Z twist
- Q:Model parameters of glass fiber reinforced plastic and glass fiber cloth
- The materials for strengthen are Medium, vinyl type and flame retardant, vinyl resin. There are many types of materials like phthalate, benzene, alkali free glass fiber roving, knitted mat etc.: polyester resin
- Q:Introduction of inorganic glass fiber reinforced plastic air pipe
- Inorganic glass fiber reinforced plastic air pipe, according to the properties of the binding materials, can be divides into: Made of binding materials with glass fiber mesh cloth hydraulicity inorganic glass steel duct and made of cementitious materials and glass fiber mesh air hardening modified magnesium oxychloride cement duct with two types of modified magnesium oxychloride cement to the sulfate type. The pH value of the hardened material should be less than 8.8, and there is no alkalinity corrosion of the glass fiber. Inorganic glass steel duct should be used alkali-free, medium alkali or alkali resistant glass fiber mesh cloth, and are consistent with current national standard "glass fiber grid" JC561, "the alkali free glass fiber roving," JC/T281, "in the alkali glass fiber roving" JC/T576 regulations. The quality of magnesium oxychloride cement duct Magnesium Oxide should comply with the national standard "Magnesium Oxide" light burned magnesite products with WB/T1019-2002 regulations. Inorganic glass steel duct can divided into the overall common type (non insulation), integral insulation type (inner and outer surface of inorganic glass steel, middle insulating material) and combination type (by special adhesive, composite plate, flange, reinforcement angle etc) and the combination of insulation, its production parameters should comply with the provisions of the table 1, 2, 3. The longitudinal and transverse lap joint distance between adjacent layers of glass fiber grid cloth should be more than 300mm, and the distance of the same layer lap joint shall not be less than 500mm. Lap length should be greater than 50mm. The wind pipe surface thickness of the slurry flating glass fiber mesh cloth is appropriate. And the surface do not have dense pores and spillage.
- Q:What is the difference between the glass and glass?reinforced?plastics?
- Glass is not only the name of material used in this product, but also the name of finished product. Glass?reinforced?plastics, the name of the material, is a heating fixed plastics compositing glass fiber with a variety of other material.
- Q:How many types of glass fiber and what is escorting yarn?
- According to the yarn bundle, it can be divided into roving, fine yarn and textile yarn. According to production types, it can be divided into direct yarn and union yarn. Yarn can be divided into twisted yarn and felting yarn according to the degree of twist. According to the manufacturing products, it is divided into winding yarn and twistless yarn.
- Q:What is the difference between glass fiber reinforced plastic antenna and cannon antenna?
- One is made of glass, the other is made of iron.
- Q:What's the difference between fiberglass roving and spun yarn? Is the production equipment the same?
- The company has advanced production equipment, strong technical force, mainly produces non alkali glass fiber 30 and 40 spun yarn, and produces 1500 tons annually. There are two kinds of paraffin and silane
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
E Glass Woven Roving 800grs
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 16000 kg
- Supply Capability:
- 160000kg Per Month kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords