Q:Should I connect the butterfly valve before and after the pump? Or gate valve?

The best pump outlet valve, because the valve opening control accuracy, no movement. Valve structure is strong, adjusting performance better than butterfly valve. The pump outlet needs constant switching and adjustment, so the pump outlet valve is suitable for gate valve.Life water system valve, it is best to choose the gate valve, strong and reliable, cut off the system to grasp. But the cost is higher, occupying more space.Choose 1 or 1.6, there is no principle requirements, because the water supply pressure of life is generally between 0.25-0.5MPA, can meet the requirements. Only 1.6 is more durable and stronger, but the price is higher.

Q:i have a slightly small mitral valve leak in my heart. my cardiologist say nothing to worry about, but i am not sure. can some one explain if it would eventually lead to some complications?

I have Mitral Valve Prolapse, and slight regurgitation. If your cardiologist says not to worry, I wouldn't worry. Mitral Valve prolapse just means you have a slight deformity of the bicuspid valve. It doesn't close correctly. It's not a disease, or anything like that, just a slight deformity. The symptoms are annoying. You may or may not have palpitations, slight sharp chest pain sometimes, dizziness, fatigue, and anxiety from it. You must have it checked yearly to make sure it's not progressing. I have had it since I was born, and now I am 28, and it has not progressed at all. MILLIONS of people are walking around with it, and don't even know it. It's not really a big deal. However, it does have the potential to worsen and you may or may not need a new valve. But that normally happens when you're older, in your 50's or up. Don't worry about it.

Q:What are the major disadvantages of butterfly valves?

Also known as butterfly valve, control valve has a simple structure, can be used for low pressure pipeline valve switching control is closed parts (disc or disc) is a disk, around the valve axis to achieve the opening and closing a valve, the valve can be used to control the flow of air, water, steam steam, all kinds of corrosive medium, mud, oil, metals and radioactive liquid media and other types of fluid. On the pipeline, mainly from cutting and throttling. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation.shortcoming1, use pressure and working temperature range is small.2, poor sealing.Butterfly valve can be divided into bias plate, vertical plate, inclined plate and lever by structure. According to the form of sealing, can be soft sealed and hard sealed type of two. The soft sealing type usually adopts rubber ring seal, and the hard sealing type usually adopts metal ring seal.According to the connection type can be divided into flange connection and clamp type connection; according to the transmission mode can be divided into manual, gear drive, pneumatic, hydraulic and electric several.

Q:What kind of butterfly valve is sd342x?

Sd342x: two-way double eccentric soft sealing butterfly valveS: two way pressureD: butterfly valve3: turbine operation4: flange connection2: double eccentricX: rubber sealProbably the shape is not so good in appearance,Double eccentric mostly elastic sealThree eccentric is multi-layer sealHope to be of help to youOpened valve Co., Ltd. on the production of butterfly valve

Q:When i waa replacing the valves in the las 4 valves , they dropped and i dont know how to make them go back up, and i dont want to take the engine out of the car, is there any tool to make the valve go back up or there is any way to do it?? People told me that i can crank it by and , but i dont know how to do it where do i have to do it, i need help please im begging for help!

As you've been asking this question for a week now time and time again I guess its time for the Nasty one to set you straight, As I've been a mechanic for over 30 years my knowledge is vast and no further questions need to be asked, You screwed up! now that you have dropped the valves into the cylinders you have to remove the head or heads that you screwed up on, period, end of sentence, there is no other way, and no you will not need to remove the engine to remove the heads, But had you did a bit of research before diving into this without a clue you would have found that a simple length of clothes line or thin rope stuffed down the spark plug hole and turned the engine over by hand to bring the piston up and push the rope into the valves to hold them place would have saved you from pulling the heads off this POS, excuse me I meant fine piece of English engineering, by trying to turn the engine over now is just a good way to bend a valve, and for all you know the piston could have been at the bottom of its stroke and the valves fell out of there guides are not even in contact with the head, so with this said do some research on how to remove the heads on this thing and fix your screw up. Live and learn, you just opted to learn the hard way,

Q:I have a 1993 Oldsmobile Cutlass Supreme and I think I have the case of the blow-by. The engine had high mileage, but was rebuilt b/c it stalled while driving. 3.1L V6 gasoline engine. The fuel filter and the fuel pump are brand new. Now we have the same problem a few months later. It stalls while driving. Its been sitting a while and won't start by itself, so I pulled off the air intake hose off of the air filter to spray starting fluid into it. I noticed oil puddled in the air intake hose, so I looked for the PCV valve on the rocker cover. There is a tube going from the air-intake hose to the rocker cover. I popped out the tube from the rocker cover and there is no PCV valve. Just tube. Is that where the PCV valve is supposed to go? If not, where can I find it on the engine? And could that possibly fix the blow-by and the stalling engine? I'd appreciate any help. Thanks in advance.

top of the manifold

Q:e.g. a patient with a prosthetic aortic valve and a patient with a prosthetic mitral valve. Also, can you get stenosis of mechanical valves or just tissue grafts?Thanks!

mechanical okorder /

Q:What is the electric butterfly valve? Please, great God!

The output signal is stable and reliable for a long time. The valve has an electric node, which is drawn out to the control center by signal line, and the signal line voltage is 12V. In fact, the valve is open and closed, there is a signal to the consumer control center, easy to monitor, the valve in addition to the electric node, with the ordinary valve is not much difference, there are also signal butterfly valve.

Q:What is the meaning of American Standard butterfly valve B series

American Standard flange connection is divided into A, B series. A series for normal flanges, B series for compact flanges. 24 "to no AB series, flange standards for B16.5, 24" above B16.47.

Q:The difference between the directly buried gate and the flange valve and butterfly valve

Buried gate also called buried gate valve, valve can be directly buried underground, built without manhole, reduce road excavation area; small well maintained road and beautiful room can reduce the difficulty of construction, reduce project cost. The directly buried soft sealing gate valve is divided into two types: telescopic type and fine fixing type, wherein, the telescopic type is divided into metal type and plastic type. In the process of construction, the telescopic type can be adjusted arbitrarily according to the distance between the buried depth of the valve and the ground, and the micro adjustment can be adjusted on the spot. The directly buried gate valve has the advantages of long-term use, no leakage, no maintenance, etc., and can effectively avoid other people switching the valve and stealing the manhole cover at will.Flange gate valve is connected to the flange gate valve, this connection is the most common way. The flange gate valve is stable and reliable when used in the pipeline, so the flange gate valve is used on the high pressure pipeline.Butterfly valve refers to the closure of parts (valve or butterfly plate) as the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve used in furnace, coal gas, natural gas, liquefied petroleum gas, city gas, hot and cold air, chemical smelting and power generation environmental protection engineering system, conveying a variety of corrosive and non corrosive media pipeline, used to adjust and cut off the media flow.