Q:Is the valve clockwise?

The valve that can rotate is the principle of screw and nut. We can see that the switch is also buckled, so it is counterclockwise, the net is rotated out, clockwise downward, so it is off.

Q:1. What does valve 13Cr&FHF mean? 2, valve WC6 (F11) what does that mean? 3. What does valve P280GH mean? 4. What does valve A335P22 mean?Thank you

The first seems to refer to the material inside the valve, containing Cr of 13% (equivalent to the 1Cr13 of our country), FHF=full face hardThe other refers to the body of the material, the corresponding standard forWC6=ASTM A217 WC6P280GH=EN10222 P280GHA335P22=ASTM A335 P22

Q:Can other valves be used instead of 10?

An elbow, an outer wire, screw down the joint of the hose, the elbow is joined together.

Q:What are the specifications of the valves PN25, DN50?

PN25 - nominal pressure 25bar (25kgf/cm -)DN50 - nominal diameter is 50mm (2)

Q:In the fire drawing, what valve does the following valve represent?

1, fire drawings, the following valve signal valve and alarm valve.2 、 signal valve is the best matching product of automatic fire sprinkler system. The structure characteristics and working principle: the top design electrical device the butterfly valve of the worm and the worm gear driving device, and with the stem straight connecting transmission. In the closed precision electromechanical device, opening mechanical instructions and imported electrical components and parts with rust proof valve. The output signal is stable and reliable for a long time.3 、 alarm valve products are wet alarm valve, dry alarm valve, rain alarm valve, pre acting alarm valve and so on. It is the core component of wet automatic sprinkler system. The water enters from the bottom of the valve body and closes the check valve through the dead weight inside the valve body to form a standby system with water pressure. The high pressure gauge indicates the system pressure, and the low pressure gauge indicates the pressure outside the system. When the protected area fire, high temperature make the nozzle temperature sensing element of blast nozzle sprinkler system, pressure drop, the valve opens, water flows continuously into the system, the nozzle opening, continuous sprinkler. At the same time, a small amount of water enters the alarm tube from the inner hole of the valve seat, passes through the filter, the retarder, and then pushes the hydraulic alarm to alarm. In addition, after the pressure switch is activated, the electrical signal is issued and the make-up water is started.

Q:What valve should be used to test the water valve?

Switch and multi way valve in the pipeline not only can flow, and flow diversion, flexible control of the medium, but also to turn off any channel to the other two channels. This kind of valve should be installed horizontally in the pipeline. Classification of ball valve: pneumatic ball valve, electric ball valve, manual ball valve.

Q:I would like to ask commonly used water valve what kind of? What are the characteristics?

butterfly valveThe butterfly valve has the advantages of simple structure, small volume, light weight, only by a few parts. But only can rotate 90 degrees rapid hoist, simple operation, while the fluid control valves have good properties. The butterfly valve in the fully open position, the disc thickness is only when the medium flows through the power, by the valve the pressure will be very small, so it has better flow characteristics. Our company is mainly metal plastic butterfly valve, eccentric butterfly valve, butterfly valve, inlet butterfly valve, wafer butterfly valve and so on.Globe valveBall valve and plug valve is the same type of valve, only its closure is a sphere, the sphere rotates around the body center line to achieve the opening and closing the valve. A valve in the pipeline is mainly used for cutting, distribution and change the direction of media flow, the ball valve is a new valve in recent years has been widely using.

Q:What kind of industry does valve belong to?

Valves are machinery and industry equipment；Valve belongs to general mechanical equipment

Q:What's the valve as a unit?

Business now there are many valve manufacturers, with the rapid expansion of SMEs, SMEs are more ~!

Q:In the decoration, I do not know where to get the valve, what kind of products should be bought?It is hard to fit the valve in the water inlet of the house. If not, can you? Will it have any effect on future use?

Common valve position is few, 1 or 2 wash basin faucet pipe toilet pool 3 4 water heater 5 water washing machineThese positions require only simple ball valves or globe valves. Gas valves need not be considered, provided by gas installation companies (specific standards).The main valve can achieve the above water source control, the installation of the branch valve is to take into account the maintenance is convenient, does not affect other water.