Drywall Stud Track and Accessories from China Factory

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
10000 pc
Supply Capability:
3000000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Description: 

 

1.Superposition joint part between main carrier and vice carrier or vice carrier and carrier is called point lap.

2.It uses lap structure to assembly, connection between joints dovetail very well. The joint face unknits and have a nice appearance.

3.There is a barb at the vice carrier joint, it can avoid loosing and falling from the infection of outside force.

4.Soleplate of main and vice carrier is zincification armor plate, which meets the national GB standard demand. We use baked paint zincifcation armor plate as baked paint panel,whoes capacity of zincification is high. It meet the national GB standard demand.

5. Raw Meterial is galvanized steel with 80-100g/sqm

 

Specification

commodity

size (mm)

thickness (mm)

length (mm)

pack

Australia system

Primary cross rail

25*21

0.55, 0.75,0.85,1.0

3600, 4800

10

Furring channel

28*38

0.55, 0.75,0.85,1.0

3000,3600,4800

25

Wall track

26*16*26

0.45,0.55,0.75

3000

20

Angle

30*30

0.55, 0.75

3000

50

Stud

51*35.5

0.55, 0.75

2400,3600,4800

10

64*35.5

0.55, 0.75

2400,3600,4800

10

76*35.5

0.55, 0.75

2400,3600,4800

10

92*35.5

0.55, 0.75

2400,3600,4800

10

Track

51*32/50

0.55, 0.75

3000

10

64*32/50

0.55, 0.75

3000

10

76*32/50

0.55, 0.75

3000

10

92*32/50

0.55, 0.75

3000

10

Middle East system

Main channel

38*12

0.45,0.50,0.60,0.80,1.0

2400,2950,3600

20

Furring channel

68*35*12

0.40,0.45,0.50,0.60

2400,2950,3600

25

Edge channel

25*25

0.35,0.40,0.45,0.50

3000

50

Stud

50*34.5

0.40,0.45,0.50

3000,3600,4800

10

70*34.5

0.45,0.50,0.60

3000,3600,4800

10

75*34.5

0.45,0.50,0.60,0.70

3000,3600,4800

10

100*35

0.50,0.60,0.70,0.80,1.0

3000,3600,4800

10

Track

52*25

0.40,0.45,0.50

3000,3600,4800

10

72*25

0.45,0.50,0.60

3000,3600,4800

10

76*25

0.45,0.50,0.60,0.70

3000,3600,4800

10

100*25

0.50,0.60,0.70,0.80,1.0

3000,3600,4800

10

East Europe system

CD

60*27

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

12

UD

28*27

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

20

T-type keel

20*6

0.35,0.40,0.45

2400,3000,3600

50

24*10

0.35,0.40,0.45

2400,3000,3600

50

Stud (CW)

50*50

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

70*50

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

75*50

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

100*50

0.40,0.45,0.50,0.60,0.80,1.0

2800,3000,3600

10

Track (UW)

52*40

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

72*40

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

75*40

0.40,0.45,0.50,0.60,0.80

2800,3000,3600

10

100*40

0.40,0.45,0.50,0.60,0.80,1.0

2800,3000,3600

10 

 

Advantage and feature:

 1.Light, good strength, cauterization resistance and water resistance

 2.Matching magnesium fire-proof board, gypsum board and many other walll and ceiling board

 3.Moisture-proof, shock-resistance, environment-friendly and so on.

 4.Easy and fast for install, time-saving

 5.High quality, competitive price and complete sets of style

 6.We can supply you the products based on your specific requirements

 

FAQ

1.Sample: small sample can be offered by free

2.OEM: OEM is accepted

3.MOQ: small order is ok

4.Test: any third party is accepted to test

5.Factory: Can visit factory any time

6.Delivery Time: small order is within 7days or according to your order

 

 

Product Overviews

 

Drywall Stud Track and Accessories from China Factory

Drywall Stud Track and Accessories from China Factory

Drywall Stud Track and Accessories from China Factory

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Home to decorate the ceiling, playing the wall, I learned from the market can be resistant, dragon card, Saint Gobanchenko these brands of light steel keel gypsum board which good point?
These things, you have to buy their own! Said the brand can also be gypsum board! But it should be better bunny. Guangdong which side with a lot! Quality is also good! Knight is light steel keel! The price is in general!
Q:Light steel keel gypsum board wall panels have cracks how to do?
The original piece of putty knock down, from the new batch of putty on it
Q:Decoration problems I want to do a noise wall, the light steel keel fixed on the wall, the gypsum board nailed to the above, how much labor costs
General package material single-sided more than one hundred double-sided more than two hundred square meters, there are special sound insulation wall board, the effect is very good, but the area is not big people do not necessarily do
Q:Light steel keel + gypsum board + surface brush latex paint partition wall per square meter offer is how much?
Light steel keel about 12-13 yuan, enough to do a square, gypsum board per square 16 yuan (double) or so, paint workers wages about 25 yuan. / Square (package workers package material); Labor costs about 18 yuan, all offer for 75 yuan or so.
Q:Gypsum board wall above the good paint glass?
Gypsum board partition wall construction operation process: (1) According to the design drawings, in the already done walls, floors, the ground release off the line, the door hole edge. (2) according to the design drawings and the actual size, with a wheel cutting machine cutting keel and classified stacking. (3) according to the line has been put away and the door edge, with nails or expansion bolts to the ground keel fixed on the ground floor, nail or expansion bolt spacing 600mm. The top of the keel into the wall of the reserved hole 100mm, and then use cement mortar packing fixed, or with nails, expansion bolts to the end of the handle along the top keel fixed to the wall. (4) According to the cut line and the edge of the door, according to the size of the file size layout, painted in the edge, along the top keel, less than the modulus should be placed in the partition with the wall at the first board. (5) According to the document mark will be cut in advance of the length of the vertical keel in turn inserted along the edge, along the top keel groove, the flange towards the direction of the proposed panel to be installed. Adjust the vertical, positioning accuracy, with rivets fixed. The vertical keel on the wall is fixed to the wall with a nail or expansion bolt, and the distance between the nail or the expansion bolt is 1m. (6) the installation of doors and windows to strengthen the installation of the keel: the first installation of the hole on both sides of the vertical reinforcement keel, and then install the hole up and down to strengthen the keel, and finally install the big hole on both sides of the upper and lower reinforcement keel and bracing. (7) Install the cross brace and support card. The vertical keel fastened, so that the entire partition keel has sufficient strength and stiffness.
Q:Light steel keel gypsum board wall height is how to determine
D =
Q:100 square light steel keel wall how many pieces of heaven and earth keel
Heaven and earth keel accurately depends on the length of the wall, the dragon than the dragon multi-hole size. Usually can be doubled the length of the wall to remove the door. Vertical spacing is usually 400, the door has to strengthen the vertical keel, wearing a keel to see the height of the wall, you can 1, but also two. Depending on the specific design. If the height of 3m, heaven and earth keel to 67m-several door size.
Q:Can my light steel keel ceiling withstand the weight?
According to your argument is no problem. Please feel free to use it
Q:Light steel keel partition wall construction process is what
Fixed Border keel: Border keylone along the position of the ball, the edge of the keel should be coincident with the elastic line. The end of the keel should be fixed, fixed point spacing should not be greater than lm, fixed should be solid.
Q:Light steel keel gypsum board partition should pay attention to what quality problems
1, contact with the stability of the keel through the keel when the wall height of not more than 3m can be set to a wall height of 3-5m should be set up two, more than 5m should be set to 3. 2, light steel keel gypsum board partition wall should be done to the structure board. 3, for the sound insulation requirements of the partition, should be along the top keel and along the keel and the main structure of the junction, the pad with long sound insulation tape, and in the gypsum board and the main structure of the embedded sealant, Fill 50mm thick glass wool.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range