Quick Details of Drawer Slide S-003:
Type: Slide,ball bearing drawer slide Place of Origin: China (Mainland) Color: White Application: Furniture Width: 27cm,35cm,45cm
Thickness: 0.8-2.0mm Package: 15-30 sets/carton style: 3 fold drawer slide Lifetime: 50000 times Loadability: Within 45kgs
Specifications of Drawer Slide S-003:
Drawer slide :
1)Material: cold rolled steel
2)Antirust protection layer, epoxy coated static powder
Type: Ball Bearing Slide/Drawer slide/Channel
Material: Cold-rolled steel plate
Max loading : 45kg
Installation method: Side installation,13 +0.2mm
Finishing: Blue zinc-plated, color zinc-plated, black zinc-plated.
Fine adjustment of gap is possible whe installing,quick separation mecanism,vibration prevention ball strip for absorbing impulsive force.and mechanism to prevent drawer from springing out.
Application: Mid-duty movable cabinet, desk drawer, ordinary furniture or any applications requiring 45kg load or less and requiring full extension.
Packaging & Delivery:
Packaging Detail: 15-30 sets/carton
Delivery Detail: 20days per 20" container
- Q:How to install drawers in brick cabinets, brick cabinets can be installed basket
- Field test, brick cabinet, drawer slide rail. The brick cabinet with drawer slide when push-pull resistance is very small, and when the slide pull end of the drawer and will not fall off or turn on the scene you can also pull the drawer, hands in the brick cabinet with drawer Click to see whether the drawer is loose, whether the clanking sound. At the same time, brick cabinet drawer drawer drawer in the process of pulling out the resistance and resilience appear where, whether smooth, but also require you to push and pull a few times in the field, after the observation can be determined.
- Q:What drawer can I do with the depth of cabinet 200mm?
- The regular ones are 10cm, 15cm, and 20cm.The drawer (CH only u Ti) table, cabinets and other furniture put things in the box bottom, no cover, can be drawn out to promote.
- Q:What kind of drawer slides?
- Secondly, the five plates are assembled by screw, drawer, drawer panel with a slot, after processing, the drawer has been installed in the drawer, let the adjusting screw holes coincide, then push the locking drawer locking nail and slide.
- Q:How to install furniture slide way?
- First of all, you need to determine the kind of slide at home, such as three tracks, two tracks. Then pull out the cabinet easily, but when you pull out, you must maintain a smooth state, so that when you pull out, it will not damage the cabinet and track. Take a look at whether there is a sharp button on either side of the cabinet. If you see it, try to press it downward with your hand. If you press it, you will hear a click, and then you will take out the cabinet.But when you press, you must not too hard, if the pressure does not understand that something stuck, you need to check. After pressing, take it out gently, and keep it flat so that it doesn't hurt the rails too much. Then pull out after check whether the drawer rail is due to deformation, or other situation, if the deformation, usually adjust the location of deformation in the fixed well, according to the original way, put it into one, this can easily complete the drawer slide disassembly, and two a big problem of installation.
- Q:How to install drawer slide?
- First, assemble the five boards of the drawer, screw the screws, the drawer panel with the card slot, and the two small holes in the middle are used for the installation of the handle.
- Q:How to support slide rail installation steps
- To install the drawer slide, first of all, the track should be taken apart, the narrow is installed on the side board of the drawer, and the width is installed on the cabinet body. When installing, the slide rail is below the flat drawer, the side plate is lower, and the front drawer is flat and the front edge plate is in front. We must distinguish between before and after. 3. Install the cabinet. Screw the white plastic holes on the side panel of the cabinet first, then install the wide track which is removed. A slide rail is fixed with two small screws one after the other. Both sides of the cabinet should be installed and fixed.
- Q:The overlapping drawer must raise the above drawer to be able to close, in the following drawer, needs to adjust the slide rail, how to adjust?
- Look at your description. It's supposed that the drawer slide is loose.You can check to see if the upper drawer has a larger gap with the top plate. If so, then the drawer is removed.
- Q:Installation dimensions of drawer slide and cabinet body
- The cabinet can be installed three drawers, an average of three equal height to remove the skirting board and panel
- Q:How to properly install desk three drawer guide?
- The guide rail is installed in the cabinet. According to the data, determine the length of your drawer and the depth of the counter to fit the size in the drawer. Secondly, the five plates are assembled by screw, drawer, drawer panel with a slot, after processing, the drawer has been installed in the drawer, let the adjusting screw holes coincide, then push the locking drawer locking nail and slide.
- Q:How to disassemble two steel ball slides?
- The steel ball slide divided into light and heavy steel ball slide slide; for moving parts on the slide track, generally slot, moving parts end is fixed with a roller or ball, slider, slide, roller or ball card into the rail groove can slide in the groove, the moving parts on the rail. Is the use of high precision ball bearing slide as the ball slide, slide outside a general embedded with a bead piece, be fixed on both sides of the ball, the moving parts are arranged in the bead piece, through the ball rolling the moving parts slide forward for cabinets, wardrobe and drawer tool box, tool cabinets, fire engines and so on. Easy assembly and disassembly, without tools, smooth and silent is its main feature.
Our company is one of the largest manufactures of steel ball sliding tracks in China. Since the establishment of the company, we have been dedicated to developing and marketing steel ball sliding track series. We have world-advanced manufacturing techniques and facilities, as well as qualified technical team, which has kept Gainlead in the leading position in Chinese steel ball sliding track market.
1. Manufacturer Overview
|Annual Output Value
||US$ 50 to US$ 100 Million
||25.00% South America
23.00% North America
15.00% Central America
8.00% Mid East
5.00% Southern Europe
5.00% Eastern Europe
4.00% Northern Europe
4.00% Western Europe
3.00% Domestic Market
2.00% Southeast Asia
1.00% South Asia
1.00% Eastern Asia
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||English, Chinese, Spanish, Japanese
||50,000-100,000 square meters
|No. of Production Lines
||OEM Service Offered
|Product Price Range