Q:Specifically an engine valve retainer.

Valve Retainer

Q:Can the inlet and outlet of butterfly valve be reversed? Why? What will happen if the reverse gear is installed?

Are butterfly valves and check valves fitted together?Butterfly valve is nothing positive and negative ah!

Q:Butterfly valve D71X-16 and D71X-16Q what is the difference?

The two difference is that the body of the material is not the same, 16 behind with no sign, expressed as a default, is carbon steel (usually C), if you need to specify material, just behind with symbols, such as Q nodular cast iron, stainless steel P.

Q:CAD drawing of butterfly valve

Your question is very international. Ha-haThis method of painting is not clear in one or two words.First you'll know the map, then you'll use CAD, so the two will add up.Guess you will.

Q:What type of valve does the butterfly valve D343X DN300 represent?

D butterfly valve3 worm gear drive4 flange connection3, three eccentric structureX the rubber cover is rubberAccording to JB/T308-2004< valve model compilation method >

Q:What is the national standard for clip butterfly valves?

GB/T 12238-2008 "flange and clip connection elastic seal butterfly valve"GB/T 26144-2010 flanged and clip on steel lined fluoroplastic butterfly valvesJB/T 8527-1997 "metal sealed butterfly valve"

Q:What is the difference between the installation and function of a butterfly valve and butterfly valve?

Therefore, the fully open position of the valve is determined by the position of the gate. Some gate valve, stem nut is located on the gate, the handwheel rotates to drive the stem to rotate, and make the gate lift, this kind of valve is called rotary bar gate valve, or call dark rod gate valve. The type of gate width, sealing surface configuration can be divided into wedge gate valve and parallel gate valve, wedge gate type valve can be divided into: single gate type, dual gate plate and the flexible gate type; parallel gate type valve can be divided into single and dual gate gate plate. According to the thread position of the valve stem, can be divided into two kinds of open rod gate valve and dark rod gate valve. Valve installation and maintenance should pay attention to the following: hand wheel, handle and transmission mechanism are not allowed for lifting, and is strictly prohibited. Double gate valve should be installed vertically, that is, the valve stem is in a vertical position, and the handwheel is at the top. The gate valve with bypass valve shall be opened before opening to balance the pressure difference between inlet and outlet and reduce the opening force. The gate valve with drive mechanism is installed according to the instruction of the product instruction. If the valve is constantly switched on, lubricate it at least once a month. The valve has the advantages of small fluid resistance, the sealing surface by the erosion of small and medium Chong brush. Opening and closing is more labor-saving. Medium flow direction is unrestricted, no disturbance, no pressure reduction. The utility model has the advantages of simple shape, short structural length, good manufacturing technique and wide application range. Valve faults between the sealing surface can lead to erosion and abrasion, maintenance more difficult. Larger size, open need a certain space, long opening and closing time. Complex structure.

Q:How can I get the fire signal butterfly valve?

Look at the instructions! Will not pick up the sales representative to come to guide!

Q:The difference between the directly buried gate and the flange valve and butterfly valve

The flange gate valve is stable and reliable when used in the pipeline, so the flange gate valve is used on the high pressure pipeline.Butterfly valve refers to the closure of parts (valve or butterfly plate) as the disk, around the valve shaft to achieve rotation and closing of a valve, the main cut off on the pipe and throttling role. Butterfly valve headstock is a disc shaped disc, in the valve body around its own axis of rotation, so as to achieve the purpose of opening or closing or regulation. Butterfly valve used in furnace, coal gas, natural gas, liquefied petroleum gas, city gas, hot and cold air, chemical smelting and power generation environmental protection engineering system, conveying a variety of corrosive and non corrosive media pipeline, used to adjust and cut off the media flow.

Q:16 inches below the choice of electromagnetic valve can be the same, it turned out to be DN200 election 1/4, and now there are DN350 can also use this? With it, limiter, pressure relief valve, locator model will change?

The valve (including the valve, butterfly valve, etc.) are equipped with pneumatic actuators are standard (including restrictor valve positioner of the electromagnetic valve is connected with the installation.) is the international standard NAMUR standards, in the standard of inside electromagnetic valve is G1/4, of course, this is the solenoid valve installation in the NAMUR interface of the driver on the situation, if the solenoid valve is not installed on the drive, but through the trachea installed in a few meters away, it would have to choose a larger size, how to choose? Depends on the switching speed of the valve requirements, such as drive gas consumption is 2L, need to open in 1S, the electromagnetic the valve requires the flow of 120L/min, plus the line loss and acceleration, 500L/min is enough.