Dmx LED RGB Pixel Lighting 26Mm For Ktv Bar Night Club Ucs 1903
- Ref Price:
-
$0.31 - 1.03
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
26mm led rgb pixel light ucs1903 IC
RGB led point pixel lights for amusement -3 pcs SMD 5050 RGB
Details:
RGB Pixels are digitally-controllable lights you can set to any color, or animate
Each RGB LED and controller chip is molded into a 'dot' of silicone.
The dots are waterproof and rugged.
There are four flanges molded in so that you can 'push' them
into a 26mm drill hole in any material up to 1.5mm/0.06" thick
They're typically used to make outdoor signs. Compared to our other LED dots
The pixels are connected by a 3-conductor cable. Blue is +12V, Yellow is Ground, Green is Data
Data is shifted down from one pixel to the next so that you can easily
connect to the strand or attach more onto the end.
Feature:
I SD controller
l Programable by Software
l Individually Control
l Conformal Coating,PVC glue protection
l IP66, Water-proof protection
l Easy installation (punching 26mm hole on metal panel)
l 26mm rgb led pixel light
Specifications
Model NO. | SJ-IC219 |
IC chip | UCS1903 |
Power Consumption | 0.72W |
Work Voltage | DC 12V |
Beam Angle | ≥120 |
LED Quantity | 3 PCS SMD 5050 |
Color | Full color (ICRGB) |
Dimension | 26*33*34mm |
Waterproof Grade | IP66 |
Work Temperature | -40-+60°C |
Life-span | 50,000H |
Certificate | CE&RoHS |
Warranty | 2 years |
Office Time:
1.8:30 a.M to 6:00 p.M (GMT+8) of Monday to Friday
2.Our office is closed on Chinese Public holidays
Payment methods:
1.T/T
2. LC
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
Air freight | 3-10 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:What is patch LED?
- LED lights, a common model, has 34654635285050 piranha.The most common assembly of lights and PCB boards is the DIP, that is, dual in line and SMT surface mount technology two.The 346546 is the LED with two positive and negative pins, which are inserted into the PCB board after cutting the foot;3528 and 5050 are a cube with 3 LED lights inside, known as the "three in one" LED lamp. It has no pin underneath, but has a metal patch that can be passed through the reflow soldering machine through the solder to the PCB board.General indoor LED screen with more patches, outdoor screen with more pins.
- Q:Indoor full color LED display module and LED what is the difference between a full color?
- The classification of the LED display according to the installation environment: indoor LED display screen, semi outdoor LED display, outdoor LED display; according to color: color LED screen, dual color LED display screen, LED display screen, the color LED display screen; according to the functional area can be divided into graphic screen, screen, screen, screen, digital dot matrix digital hybrid screen.
- Q:The quality of the LED patch module
- Chip size. The larger the size of the same chip, the higher the general brightness, the stronger the bearing capacity, the higher the stability performance, of course, the price is relatively high. The size of the module chips now includes: 9MIL, 10MIL, 12MIL, 14MIL, 23MIL, and so on.
- Q:What is the principle used in SMD LED lamp, should pay attention to what the problem?
- Pin forming, 1, LED pin molding must be completed before welding, bending angle must be more than 3mm of the gel to bend the stent. Pin over 2 times in the same place can not fold number, pin bent to 90 degrees, and then returned to the original position for 1 times; 2, pin forming must use fixture or by professional personnel to complete the first, pay attention to avoid the epoxy body caused by excessive internal wire fracture; 3, to ensure the distance between pin pin forming consistent with the circuit board; 4, when LED has good welding in the welding process or after, please don't bend light feet, to avoid damage to the lamp.
- Q:SMD LED lamp working voltage?
- Single chip of 1 watts, more than a lot, different colors, the voltage will be different. White is usually 3.0-3.6V.* in addition to their working voltage, working current is more important parameters, once the flow, it will burn out.The LED lamp. With chips is variety, many tricks, they can be connected in series and parallel. The voltage is divided into high voltage, low voltage and medium voltage
- Q:What determines the brightness of the patch LED?
- The current through the lamp itself. If the same lamp, so it is necessary to ensure consistency in the different current circuit, the test voltage of little significance, especially in the case of parallel lamp, current a few beads each share is not the same, some big, some small.
- Q:LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- SMD patch products basically can be used in reflow soldering, especially a little note here that the eutectic welding is the connection between the chip and the substrate support or specifically, is the bottom of the chip after completion of production of coating material and a layer of Sikkim alloy, and then set up a heating zone in solid crystal machine package in time and a temperature of about 300 degrees, the realization process of the chip at the bottom of the Sikkim alloy melt and silver plated layer connection bracket, and a clear distinction between reflow.
- Q:What does patch LED light mean?
- Look, what's your product?. Some products have volume requirements, straight line will be relatively large, patches of small affixed to the circuit board does not occupy space, if only the light source, it may be an ordinary light bulb, as LED power saving.
- Q:What are the storage requirements of SMT patch LED (LED)?
- Moisture-proof packing- anti SMD LED in the transport and storage of moisture absorption, SMD LED shall be placed in sealed moisture-proof bag, inside put damp proof agent for protection, and placed the humidity humidity SMD display card packaging bag.
- Q:Patch LED features
- The principle of luminescence is that of cold luminescence, not by heating or discharging light, so the component life is about 50~100 times longer than that of tungsten filament bulb, and about one hundred thousand hours.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Dmx LED RGB Pixel Lighting 26Mm For Ktv Bar Night Club Ucs 1903
- Ref Price:
-
$0.31 - 1.03
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 50 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
