Dlc Ul Cul Led Tube T8 2Ft/3Ft/4Ft/5Ft/6Ft/8Ft Ac100~277V 5 Years Warranty
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pieces pc
- Supply Capability:
- 50,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Advantage of DLC UL cUL led tube T8
1. UL/cUL certified 100~277Vac, 2ft, 3ft, 4ft, 5ft available (E349233&E349234)
2. DLC/CE/RoSH/FCC approved
3. High luminous efficacy up to 110lm/w
4. High CRI up to 80
5. PFC>0.9, THD<14%
6. LM79 test report for led tube, LM80 test report for LED lighting source, IES files
7. Strict quality control
(1). ISO9001:2008 quality management system
(2). Hi-pot test at 2500V voltage while assembling
(3). Vibration test before shipment
(4). 72 hours aging test before shipment
8. 3 or 5 years warranty
9. Welcome multiple UL listing
Basic Parameter of DLC UL cUL led tube T8
Model No. | SNT8B-06S | SNT8B-09S | SNT8B-12S | SNT8B-15S |
Lighting Source | SMD2323 | SMD2323 | SMD2323 | SMD2323 |
LED QTY | 50 | 72 | 100 | 120 |
Power | 9w | 14w | 18w | 22w |
Luminious Flux | 990lm | 1540lm | 1980lm | 2420lm |
Luminious Efficacy | 110lm/w | 110lm/w | 110lm/w | 110lm/w |
Length | 600mm/2ft | 900mm/3ft | 1200mm/4ft | 1500mm/5ft |
CRI | 80+ | 80+ | 80+ | 80+ |
PFC | 0.9+ | 0.9+ | 0.9+ | 0.9+ |
Beam Angle | 120 | 120 | 120 | 120 |
Base | G13 | G13 | G13 | G13 |
Input Voltage | AC120-277V | AC120-277V | AC120-277V | AC120-277V |
CCT | (2700~3300K)/(4100~4500k)/(5500~6000K)/(>6000K) | |||
Material | Al+ PC | Al+ PC | Al+ PC | Al+ PC |
IP | IP40 | IP40 | IP40 | IP40 |
Life Span | 50,000hrs | 50,000hrs | 50,000hrs | 50,000hrs |
Recommended application of DLC UL cUL led tube T8
general illumination for homes, offices, restaurants, hotels, schools, hospitals, institution buildings, shopping malls, buses, trains, warehouses, parking lots etc.
Our service:
1. Your inquiry would be replied in within 24 hours.
2. Your special requirements of ul t8 tube can be accepted.
3. Reasonable price would be provided by your order qty.
4. 5 years experience of production will always provide you pretty competitive price and superior goods.
5. 10 years experience engineers would be provided you helpful free technical.
6. 1300-square-meter factory can output at least 50KK SMD LEDs and 70K LED lighting monthly, To effect delivery smoothly.
7. Reasonable shipping cost are quoted under your requests.
- Q:The difference between LED and fluorescent lamps
- Fluorescent tube filled with low-pressure argon or argon neon mixed gas and mercury vapor, and the inside surface of the fluorescent tube in the glass is coated with phosphor fluorescent paint, has made of tungsten filament in the ends of the tube coil. When power on, first of all, current through the filament heating and release the electronic, electronic tube gas into plasma, and make the tube current increase, when the voltage between the two groups of filament lamp began to produce discharge after more than a certain value, the mercury vapor from 253.7 nm and 185 nm wavelength ultraviolet, fluorescence phosphatic fluorescent paint on the surface of the pipe inside can absorb ultraviolet light, and release the lower wavelength of visible light. The color of the light is controlled by the proportion of phosphor, while the glass tube avoids harmful ultraviolet rays and other harmful substances
- Q:The circuit board in the LED fluorescent tube, what's the name of the component?
- I don't know what you're doing with your electrons, and I'll give you three days to complete the schematic. Just like your boss says, don't let it go.
- Q:How does the traditional fluorescent tube stand install led lamp tube reforming method
- According to the size of the pipe, the tube length is selected with the LED lamp and the transformer, the connection can be advised to the merchant when the purchase, and then put on. Pay attention to. Leds are larger in diameter than traditional straight tubes, and not all old light fixtures are adaptable.
- Q:Is a three-male LED fluorescent lamp? How the quality?
- All the leds in sanxiong are made of the chip of the corry, which is very expensive, which is about a dozen times better than the normal LED product, but the quality, the light color aspect is not to be said, very good. See the product that you want to use good or general, want to use good can choose, if required, recommended the other manufacturers, including, Anatole, group of states, Carl is fine.
- Q:LED energy-saving integrated fluorescent lamp tube, in the center has four segment interconnection, when the dark halo light is not known to be that electronic parts failure.
- Integration tube: currently, mainly appears in the LED industry, design reason mainly lies in the fact that the LED itself is not easy to damage, but the LED heat emitted by itself is very big, if the cooling area is too small, easy to cause the droop is bigger, so will the lamp and stents design together at the same time can reduce the cost, and can ensure the LED light attenuation!
- Q:How do I get the four joints of the LED fluorescent tube, and I'm going to do any two of them that can search through the AC220V to light up, and not make the wire and the zero line together? thank you
- I can't put a picture on it, you can try it yourself, add a rectification bridge at each end of the tube, and then you put the positive plus positive on both sides, negative plus negative, onto the next bridge
- Q:The LED light bulb is more efficient than the daylight lamp
- If you have to do the right thing to protect your eyes, you won't be able to complete the test unless the national instrument gives you the test. Save electricity, let alone the affirmation is LED lights save electricity, and fluorescent lamp power, also LED to light a lot, the brightness of the fluorescent lamp 20 watts, LED 7 watts around as long as can achieve to about 20 watts of fluorescent lamp, can save electric energy 50%.
- Q:What are the types of leds?
- Now the most common in the market is T5 integrated fluorescent lamp, T8 sub-standard, T8 integrated fluorescent lamp, three kinds. The length is 30cm, 60cm, 90cm, 120cm, 150cm, etc. There are also T4, T6, T10, etc. These specifications are rarely used in LED fluorescent lights. Please accept your satisfaction Is that ok?
- Q:How much energy does normal lamp tube compare with LED light tube?
- The standard lamp tube 27w is equivalent to the 9w of led lamp tube, led lamp tube is nearly 3 times more energy than normal lamp tube, and the led life is longer, can generally usable 30000h hours.
- Q:The life of LED fluorescent lamp tube
- LED fluorescent lamp power saving more than 80%, life expectancy of more than 10 times of ordinary lamp, is almost free maintenance, often there is no want to change the lamp, ballast, the problem of electric fluorescent starter, about half a year down can switch back to the cost of cost savings
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Dlc Ul Cul Led Tube T8 2Ft/3Ft/4Ft/5Ft/6Ft/8Ft Ac100~277V 5 Years Warranty
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Pieces pc
- Supply Capability:
- 50,000 Pieces per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords