Product Name: Disel Forklift Truck 6.0T with Good Price
CHARACTERISTIC AND DIAMENSION
MAST TILT ANGLE
FRONT OVERHANG（Wheel center to fork face）
OVERALL LENGTH（Without fork）
MAST LOWERED HEIGHT
MAST EXTENDED HEIGHT （With Backrest）
Overhead Guard Height
TURNING RADIUS (outside)
LIFTING （Full load）
POWER AND TRANSMISSION
FUEL TEAK CAPACITY
ELECTRICAL SHIFT/MANUAL SHIFT
For Transporting Goods
Put into containers.
Q1: Why buy Materials & Equipment from OKorder.com?
A1: All products have its ISO certifications, adheres to the highest standards and a commitment to supply chain safety and customer satisfaction.
Q2: How do we guarantee the quality of our products?
A2: We have established an advanced quality management system which conducts strict quality tests at every step, from raw materials to the final product. At the same time, we provide extensive follow-up service assurances as required.
Q3: How soon can we receive the product after purchase?
A3: Within three days of placing an order, we will begin production. The specific shipping date is dependent upon international and government factors, but is typically 10 to 30 workdays.
Q4: If we can produce some Disel Forklift Truck 6.0T with Good Price according to customers request?
A4: Yes, we can produce Disel Forklift Truck 6.0T with Good Price according to the difference country situations to make it suitable to the market and customers. We have very professional technical team to make the design.
Q5: How to make a quick resolution for after service?
A5:We have overseas branches all-around of world, If needed, the seller shall dispatch 2 engineers to the buyer's site for supervision of training. The buyer shall make available of necessary facilities &skilled personnel at site for training.
- Q:How does the forklift start?
- Start the engine Step 1: step on the clutch pedal, start the engine, gradually increase the temperature of the engine, adjust the multi-way valve properly, and lift the fork lift off the ground about 15-20cm. (1) will shift in the middle (gap), hand brake in the braking state, insert the starting switch key and turn clockwise to "warm up" position, for 5 seconds, and then go to "start" position, at the same time gently on the accelerator pedal, and tread down the clutch pedal, starting time shall not exceed 10 seconds, once starting immediately after let go, the key to automatic reset, if the engine won't start, should lie between 1 to 2 minutes, starting again.
- Q:What is the difference between a forklift mechanical drive and a hydraulic drive?
- Hydraulic drive has a smooth, smooth and easy control. When the gas pedal is released, the shutdown of the oil circuit also causes the vehicle to slow down automatically. I won't tell you what the maintenance costs are, but the hydraulic car is expensive and the parts are too expensive and the parts are too expensive. But as long as normal use and maintenance is ok. Using hydraulic drive advice, use linde.
- Q:The operation procedure of forklift truck
- 1) check the vehicle Before (1) forklifts, the appearance should be inspected, and the fuel, lubricating oil and cooling water should be added. (2) check start-up, operation and braking performance. (3) check the lighting and sound signal to be fully effective. (4) the forklift should check the pressure and the temperature is normal. (5) after the operation of the forklift truck, it should also check the leak and replace the sealing part in time. (6) the electric cylinder forklift should check the contents of the electric car and inspect the circuit of the electric bottle forklift
- Q:How many decibels is the sound of a battery forklift? Is it noise?
- Electric forklifts are less noisy, less than 70 decibels for foreign brands, not noise The domestic is larger, it is 75 to 80 decibels, the diesel car has more than 80 decibels
- Q:What oil do you use for forklift
- According to the regulations of the engine manufacturer choice, shall not be lower than the quality levels but can be higher than stipulated by the manufacturer, the quality level is usually set by the American petroleum institute standards, such as API (American petroleum institute English abbreviation) CF - 4, and CH, CG - 4-4, including class C on behalf of the engine oil is suitable for diesel engine use, and the English letters represents quality levels, CF - CH - 4 level from low to high The viscosity of the oil also should be selected by the manufacturer's (viscosity and ambient temperature).
- Q:What is the safe speed of the forklift truck
- In factories, cars are typically limited to 5km/h, which is not a requirement for companies.
- Q:How many ways to push the forklift truck?
- commonly used ordinary internal-combustion forklift diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 8.0 tons, general operation channel width of 3.5-5.0 meters, emissions and noise into consideration, usually used in outdoor, workshops or other places with special requirements for emissions and noise did not.
- Q:How do you tell if a forklift is retrofitted?
- To identify whether the forklift is refurbished: The new forklift has only the sole manufacturer's certificate, which has engine Numbers, serial Numbers, production dates, and old forklifts. Look up from beneath the car, such as no sludge in the sag, paint thinner, door frame without wear and walk it sounds small, small gap control system, the basic is new. The most common thing is to look at the colour and shine of the tires, and the rear tire color and gloss are all dim. It is also possible to distinguish between the tread of the tread and the tread of the tread, and the new tyres are not as smooth as the new ones. Renovation tire tire body is compared commonly coarse, tire side have traces, a sign of retreaded tire are mostly to the poster, with fingernails scratching the logo, can pick off will be retreaded tire.
- Q:What procedures are required for a forklift licence
- You need to buy the invoice and the certificate from the new car, and every car has to fail, especially if the lights are OK. Then look for the quality technical supervision bureau, fill in a form, they send someone to come and check once!
- Q:What are the rules for the forklift
- There is an article on this website that is in PDF format that you can't replicate, and you can look it up and look at the rules that include loading and unloading when you can't lean forward
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range