Different color 12 volt led light strip wholesale,wireless led strip light with remote control .
30leds per meter/54leds per meter/60leds per meter/120leds per meter/customized
150SMDs 5meters/270SMDs 5meters/300SMDs 5meters/600SMDs 5meters/customized
rgb/pure white/warm white/cold white/red/yellow/blue/green/purple/pink
Long life span
Music Control Function
IC Control Function
1) Architectural decorative lighting
2) Archway, canopy and bridge edge lighting
3) Amusement park, theater and aircraft cabin mood lighting
4) Emergency hallway lighting
5) Auditorium walkway lighting
6) Stairway accent lighting
7) Concealed lighting
8) Backlighting for signage letters
9) Channel letter lighting
10) Emergency exit path lighting
11) Cove lighting
Customized label/ Logo can be made onto packing box.
Packaging & Delivery
1 x Box
Estimated Delivery Time
2-8 business days
3-8 business days
2-10 business days
1-7 business days
6-14 business days
7-12 business days
China Post Air Mail
7-15 business days
China Post SAL
14-30 business days
30-40 business days
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:Is the LED belt safe?
- In general, the high voltage light belt is relatively safe; otherwise, a high pressure are scared, is not.
- Q:Can the LED light band be used alone in the open air? Is it waterproof when it rains?
- Are you talking about the LED belt? Light belts are generally not recommended for outdoor use because the performance is relatively less stable. You can use outdoor lights such as cord lights or guardrail tubes.
- Q:Home decoration, lights band 5050 and 3528 what is the difference?
- The first is the process of LED welding in copper wire above, then put the PVC pipe or equipment used in direct forming, round and flat two, named according to the number and the shape of the lamp wire belt to distinguish between two lines called, round in front with a round, round or flat line; in front with flat characters, namely flat line. Later developed into a flexible circuit board is used FPC as carrier, because of its simpler processing technology, quality is easier to control, longer life, higher brightness and color, and gradually replaced the earlier process, become the trend.Because the lamp belt is generally welded LED, so there are many LED lights, but because the noun is too long and simplified into a band.
- Q:Can one of the four LED lights carry a five?
- If it is of high voltage type, it is possible to supply the power directly from the 220V.
- Q:LED soft light with color temperature 2400k what do you mean?
- LED soft light with color temperature 2400K meaning: LED color temperature parameter is 2400K, color temperature generally press 3000K warm white 4000K, white 6000K, cold white points. 2400K color warmer, suitable for places requiring lower color temperature.
- Q:Waterproof LED lamp belt used after a period of time, there is a part of the lamp with white into orange, what's the matter?
- Waterproof lamp with 3 waterproof glue, waterproof casing, gluewaterproof.The three lights in the process of using the glue properties will produce oxidation, with epoxy glue, glue, glue sleeve.After the oxidation may have a slight color, slightly yellow, light color after visual orange emission through the surface of the glue in may.
- Q:LED lamp and lamp with high and low points?
- I don't understand what you say,The normal white light source is the basic 3V to light, if you give a 2.7/2.8V or to light up, but if you give a 1.5V is absolutely not bright,It depends on his volt ampere characteristics,We should look at how much light with a lamp, and on a few a few,
- Q:According to the LED lights, how to judge the quality of the products?
- Look at the cleanliness of the surface of the LED lamp band. If the LED belt produced by SMT process, its surface cleanliness is very good, and no impurities or stains can be seen. However, if you use hand welding process produced cottage version of LED lights, regardless of how the surface cleaning, there will be traces of stains and cleaning, and at the same time on the surface of FPC will have soldering flux and tin residue.
- Q:Can you tell me if the LED light belt can be lit for a long time?
- LED can be used for more than 50000 hours in the general description, and some manufacturers advertise that LED can operate for about 100000 hours. The main problem in this respect is that the LED is not simply no longer operational, and its rated service life cannot be calculated with conventional lamps. In fact, when testing the life of the LED, no one stays around and waits for it to stop working. However, there are other ways to measure the life of LED.
- Q:What are the LED patch bands, single panels and double panels? What's the difference between them?
- The difference between single and double sided panels is that the single panel is the PCB board. Only one side has circuitry. The double panel is the top and bottom of the substrate. In the application of the light belt, the substrate material is the same, the function is to link the electronic components as required, and to become a complete PCB, to achieve the required functions.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range