Q:But they had heard jac forklift, now out a new model seems like three years warranty, feeling pretty good, now dare to do three years warranty of forklift jianghuai should be the first.

The joint hang-fork is the longest year, some of which are 3 months and 6 months, hydraulic parts and bridge transmission for a year, or 2, 000 hours; The engine is half a year, 1000 hours. Most of the other manufacturers are guaranteed for six mon

Q:How can the forklift truck change the antifreeze fluid and find no drainage

After rinsing the old antifreeze liquid, open the water pipe and release the tap water

Q:How does flexsim implement a forklift truck to move the product to the shelf

Double-click the staging area to check "use transport" for the temporary entity flow TAB.

Q:Basic requirements for forklift operation

Must go through the relevant departments exam, special type of work operation certificate issued by government agencies, can drive forklift, and strictly abide by the following safety operation procedures. Must study carefully and follow the rules strictly, and be familiar with the performance of vehicle and operation area. Master the basic knowledge and skill of maintaining forklift, and do well in the maintenance of the vehicle according to the regulations. It is strictly forbidden to drive people and drink and drive. No eating and small talk during the journey; No mobile phone calls on the way

Q:For what occasion is a forklift solid tire and pneumatic tyre

If the quarry rocks and other bad sites are made of solid tires, you are not afraid to wear a flat tire! The pneumatic tyre is light and flexible, but the tyre is too scared to wear, so it is suitable for the warehouse, the factory and the asphalt road.

Q:What is the difference between a forklift and a trailer for a hydraulic drive?

The hydraulic drive, forward and backward joystick is on the left hand, push forward (mechanical changeover valve) or move (the electromagnetism valve), the move forward; Back is the back. On the right hand side is a cargo fork operated valve, from the steering wheel to the right, in turn to lift, to tilt, to the tools (side shift, rotate, hold, etc.). The pedals move from left to right, braking, throttle. Hang up the ignition.

Q:Where are the advantages and disadvantages of a battery lifter and a diesel forklift

chassis The driving system is a device that ensures the forklift rolls and supports the entire forklift, consisting of a scaffold, a bridge, a wheel, and a suspension device. Forklift drive axle, front axle for this is to increase the load carrying the front axle shaft, in order to improve the driving wheel on the adhesive quality, increase the surface adhesion, to ensure that the driving force of the engine to be able to give full play to. The rear bridge is to the bridge. The steering gear is located in front of the driver, and the lever, such as a gearbar, is placed on the right side of the driver's seat.Steering system is used to make the forklift is decided according to the driver's intention to walk in the direction of the system, forklift steering system according to the energy needed for the steering is different, can be divided into mechanical steering system and power steering system. The former USES the power of the driver to turn to energy, which is made up of the steering gear and steering gear and the steering mechanism. The latter is a combination of driver's physical and engine power steering. In normal circumstances, the forklift turns to the required energy, and only a small portion of it is supplied by the driver, mostly by the engine. The steering mechanism is provided. But in the case of a switch to a power plant, the driver will generally be able to take the steering wheel. In the case of forklift, the steering wheel is used to reduce the driver's load. The usual power steering gear has the integral power steering, the semi-integral power steering and the steering force..

Q:Does the forklift have only one wheel? Front engine

Due to the effect of differential, when a car driving wheel stuck in soft ground on the other side of the wheel is common to skid, and generally no differential lock, lock generally only suv there speed.

Q:A manual forklift oil leak, what if you can't get up?

Internal leakage (1) there is too much friction between the stem and the valve body Multiple directional control valve hoisting and tilt on the stem of each have three groove, groove and oil that can be switched on or off oil, change the way to work. Good distributing valve clearance between the valve stem and valve body is small, the spill is few, so the hydraulic cylinder down or tilt volume is small, do not affect work. But when wear clearance is too large, under the pressure of the hydraulic oil pump at work to produce, can cause work in oil or oil spill oil and the oil return tao, automatic back to the tank. The reason is mainly, because of the distributing valve use for a long time or the oil not clean accelerated wear of valve stem and valve body, such as destroy the sealing surface, lead to the oil. Repair if stem wear lighter, when to stem chrome plated finish; If the stem is worn badly, it needs to be replaced.

Q:What do you mean by the center spacing of the load on an electric forklift?

This principle is like the weight of a scale, but the weight of the lead is small, but it can be weighed up to a thousand jin, because its torque is longer. The same principle applies to electric stacking. Because most electric stacking vehicles are supported, that is, the legs are supported under the fork. Such a design could extend the fulcrum of the vehicle forward and, at the same time, reduce the size and weight of the body.