Diesel Forklift Truck- FD25/30/35
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Model | | FD25 | FD30 | FD35 |
Power | | Diesel | Diesel | Diesel |
Operator type | | seat | seat | seat |
Capacity/rated load | Q(kg) | 2500 | 3000 | 3500 |
Load centre distance | c(mm) | 500 | 500 | 500 |
Lift height | h3(mm) | 3000-6000 | 3000-6000 | 3000-6000 |
Load distance,centre of drive axle to fork | x(mm) | 485 | 485 | 485 |
Wheelbase | y(mm) | 1700 | ||
Service weight | kg | 3980 | 4350 | 4457 |
Tyres type | | pneumatic/solid | ||
Tyre size,front | mm | φ657X172 | φ695X218 | φ695X218 |
Tyre size rear | mm | φ527X150 | φ577X162 | φ577X162 |
Tread,front | b10(mm) | 970 | 1000 | 1000 |
Tread,rear | b11(mm) | 970 | ||
Tilt of mast/fork carriage forward/backward | Grad | 6°~12° | ||
Height,mast lowered | h1(mm) | 2040-2654 | 2070-2684 | 2070-2684 |
Height,mast extended | h4(mm) | 4067-7067 | 4250-7250 | 4250-7250 |
Height of overhead guard(cabin) | h6(mm) | 2060 | 2090 | 2090 |
Seat height/stand height | h7(mm) | 1052 | 1064 | 1064 |
Overall length | l1(mm) | 3650 | 3750 | 3860 |
Length to face of forks | l2(mm) | 2580 | 2680 | 2790 |
Overall width | b1(mm) | 1150 | 1205 | 1225 |
Fork dimensions | s/e/l(mm) | 40/130/1070 | 45/130/1070 | 45/140/1070 |
Fork-carriage width | b3(mm) | 1160 | 1200 | 1200 |
Ground clearance,centre of wheelbase | m2(mm) | 135 | 150 | 150 |
Aisle width for pallets 1000×1200 crossways | Ast(mm) | 3790 | 3950 | 4000 |
Aisle width for pallets 800×1200 lengthways | Ast(mm) | 3590 | 3750 | 3800 |
Turning radius | Wa(mm) | 2190 | 2350 | 2400 |
Internal turning radius | b13(mm) | 875 | 902 | 902 |
Lift speed, laden/unladen | m/s | 460 | 450 | 400 |
Type of drive control | | mechanical/hydraulic |
----------
Stability
• Cab design by SIP point , conform to EN- ISO 5353, ensure compartment with great comfortable and fatigue- free operating.
• Leak-free O-rings imported from Japan NOK face seal fittings reduce leaks
• Drive axle and steering axle , transmission made by TCM technology , float type structure achieve a flexible connection between engine and frame , reduce vibrations greatly. JAPAN SHIMADSU type hydraulic pump with low noise
• The cylinder have dual safety system — with lowering safety valve and lowering limited valve.
Safety
• Advanced multifunction LCD/digital display provides fast and accurate Monitoring truck status.
• The cylinder offers new design by dual safety system — with lowering safety valve and lowering limited valve.
• The electric F/R lever with neutral safety start system.
• An intelligent sensor and buffer monitoring system: with safty check valve to absorb the mast drop speed automatically to avoid crashing the floor and damaging goods.
Ergonomics & Efficiency
• Wide view mast, clear visibility.
• Cowl-mounted hydraulic levers design offers big operation space.
• Adjustable tilt steering column offers the most comfortable operator position.
• The optional of the magnetic electric F/R control lever ,simple for operation and less efforts.
• Low noise <82AB(A) : sound absorbing material mounted within the front engine cover, with air intake system on the back pillars of overhead guard .maximum reduces the noise.
• New designed aluminum structural radiators.
Easy Maintenance
• Insulated engine cover with gas-filled cylinders with automatic locking device to assist in opening and preventing the cover from unexpected closing. The cover can opens up to 78-90 degrees.
• Steering axle uses the traverse tanks. The compact construction with large open space, easy to maintain.
• Use integral sealed electric circuitry. Optimized the control system and easy maintenance.
• Floor board are easily removed, reduce time for quick service assess.
- Q:How is the forklift card checked online?
- Click on the "special equipment management" section; On the right, you will see a "operator" under the "integrated query" section. Click "operator" to enter the "national special equipment practitioner information query system"; Enter the query system to click the "operator query" entry, enter 3 items: name, id number, forklift card number, according to the query
- Q:What's the tonnage of the forklift
- The standard forklift truck is usually one ton, two tons, three tons Special choice in addition to the standard forklifts, forklift with a container for container operations, points into the tank container forklift forklift (2 ~ 5 t), the empty container stacking forklift (7 ~ 10 t) and a tank full of loading and unloading container forklift (20 ~ 42 t) Each rating of the forklift truck crane quality refers to the cargo weight within the standard load center distance forklift, forklift truck door frame, vertical lifting by forklift standard lifting height (hoisting height provisions in China standard is 3000 mm) when lifting the quality of the goods. User when choosing forklift tonnage, therefore, should be based on the center of gravity of the loading and unloading goods compared with the size of the forklift truck standard load center, such as cargo center of gravity is equal to or less than the standard forklift load center distance, is the selected forklift lifting quality rating equal to or higher than the goods quality. If the center of mass of the cargo is greater than the standard load center of the forklift truck, the loading curve of the forklift truck will be determined according to the loading curve of the forklift truck.
- Q:The basics of driving a forklift
- Note the position of the gearshift and the reverse pole. The speed of the forklift truck is slow, usually only one and two blocks, and a reverse gear is specially set up. When driving, first hang in the reverse gear, switch the forklift to move forward or back, then push the shift lever to 1 stop and start smoothly. The forklift does not stop changing direction, causing damage to the transmission.
- Q:What type of work is the forklift worker in the new labor law
- Multiple labor relations due to the labor contract law acknowledged in this concept, so the labor relationship is weakened, as long as the original unit will your affiliated to the labor contract the legal procedure, you should be and the labor service company to sign labor contract, the labor service company with your former unit labor dispatching agreement, you have no relationship with the original state-owned enterprises, they're just burden you overtime, security protection and training support.
- Q:For what occasion is a forklift solid tire and pneumatic tyre
- First forklift is no shock, not like a car has good shock absorption measures, completely on seat to buffer, inflatable tires that can reduce the vibration of the body, to a certain extent in more bumpy road runs not so uncomfortable. However, the fact that the heart is in a foreign country is a lot more on the road that is flat, not applicable to the place that is very bumpy.
- Q:The depreciation period and the rate of depreciation of engineering machinery such as forklift truck
- The depreciation of engineering machinery such as forklift truck is five years The new accounting standards are not required for the rate of damage. 5% of the original requirements
- Q:How does the fork of a forklift know that there is no balance
- Heavy load balance: is a problem distortion for the test fork or not. The payload is placed in the middle of the cargo fork. Stop at a few centimetres from the ground (for safety) to measure or measure. The fork tip is separated from the ground. Can be measured.
- Q:What procedures are required for a forklift licence
- The forklift should be known Number one: you need information for the inspection (2) inspection of motor vehicles in the factory Certificate of forklift (original and copy of each) A copy of the owner's code certificate A copy of the business license of the owner It is not directly handled by the legal person (which is required to submit a power of attorney)
- Q:What is the difference between a forklift and a forklift?
- A forklift is used to carry loose and solid goods, usually with building materials, such as gravel, sand, etc. Forklift truck is mainly used for packing good or single bulk goods such as containers, cargo wooden cases, etc.
- Q:Is this the electric forklift truck?
- The electric bottle forklift is generally referred to as a battery balanced heavy lift truck (four wheels, or three pivot points), which is a switch between two wheels and a switch to a flexible one. Electric forklift is more widely used, with electric stacker, electric front-moving truck, battery balance truck. Electric stacking (stacking) wheels are relatively small, suitable for flat surface use, and battery balanced lifter wheels are as large as diesel forklifts.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Diesel Forklift Truck- FD25/30/35
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords