Diesel Forklift Truck 2-3.5ton
Certification:CE, ISO9001: 2000
Packing:Moistureproof Package in Container
Production Capacity:1000 Unit/Month
2-3.5Ton Diesel Forklift Truck
1. Three alternatives of engine: Imported Isuzu C240, Yanmar 4TNE92/94/98 engine, and domestic Xinchai 490/495. Economical but powerful enough
2. Transmission: With TCM technology
3. Man-machine engineering designs, including the floating shock absorber configured on the engine, the elastic linked steering axle, the redirector providing low tensional moment, the semi-floating bonnet with built-in heat and sound insulation, ensure the comfort of driving.
4. The optional imported engines meet EU stage-III mission control regulation and obtain EPA accreditation
|4||Gearbox change speed type||Hydraulic/Mechanical|
|9||Free lift height||mm||140||145||150|
|11||Mast tilt angle||Fwd/Bwd||deg||6/12|
|12||Overall length (without fork)||mm||2513||2583||2698||2725|
|14||Mast height fork lowered||mm||1995||2070||2160|
|15||Overall height fork raised||mm||4030||4250||3290|
|16||Overall height (overhead guard)||mm||2070||2090|
|17||Turning radius (outside)||mm||2170||2240||2400||2450|
|18||Load distance (centerline of front axle to front face of forks)||mm||483||498|
|19||Minimum Aisle -90 degree stack(Add load length and clearance)||mm||2640||2710||2885|
|23||Min. Under-clearance ||Bottom of mast||mm||110||135||145|
|24||Bottom of frame||mm||115||140||140|
|Performance||25||Speed||Travel Max.||With load||km/h||17||18|
|31||Max. Drawbar pull||With/without load||kg||1250/850||1250/850||1100/1000||1304/1190|
|33||Max.Gradeability||With/without load||% (fan)||20/20||17/18||15/18||15/18|
|35||Weight distribution||With load||Front||kg||4730||5480||6455||7320|
|Brake||41||Brake||Service ||Hydraulic-Foot pedal|
|Transmission||43||Battery||Voltage / Capacity||V/AH||12/100|
|44||Internal combustion engine||Model||ISUZU / YANMAR / NISSAN / XINCAI|
|47||Number of cylinder||4|
|49||Fuel tank capacity||lit||60||70|
|51||Shift (Fwd/Rvs)||1/1 (2/2)|
- Q:What certificate is required to train the forklift
- You will drive a forklift to register for the certificate. Will not still go to zhongshan's dongfeng town, zhongshan real kung fu professional forklift training to study and test.
- Q:What's the matter with forklift
- 5) forklift rack and gear meshing clearance adjusting too close, if this is the case, the fault diagnosis and discharge should be removed when the rocker arm in steering gear, if you turn the steering wheel to feel heavy, you should adjust the rack and gear fan, the progress of the screw rod bearing. If it feels unevenly or inside, check the screws, steel balls, pipe clips, rack and bearings without any roughness or damage. Repair or replace when necessary. Ruled out the above failure, forklift can normal operation, should pay more attention to forklift truck is in failure, timely troubleshooting, not small fault assemble into a big failure. All mentioned above is a counterweight forklift driving type steering mechanism, balance weight used in most hydraulic forklift steering, so normally is smaller and lighter. But the same as the material handling tools, electric stacker, electric truck steering system is how China chose, popular models is based on the principle of the leveraged direct mechanical twisting to handle drives the driving wheel reverse adjustment, so very tired very difficult operation. Also, so make working forklift for this kind of fatigue and developed an EPS electronic power steering system, with the motor drives the driving wheel steering, operators only need to turn the handle to realize positioning can be easily. In detail, the electronic steering system principle Outlines of course
- Q:What are the procedures for buying a forklift?
- Special equipment operator (original and photocopy); Product quality certificate (original and photocopy). Note: all copies need to be covered with the official seal.
- Q:What oil do you use for forklift
- Go to a regular agent or service center because there are fake products in the market and avoid unnecessary losses.
- Q:How many ways to push the forklift truck?
- commonly used ordinary internal-combustion forklift diesel, gasoline, liquefied petroleum gas or natural gas engine as power, load capacity of 1.2 8.0 tons, general operation channel width of 3.5-5.0 meters, emissions and noise into consideration, usually used in outdoor, workshops or other places with special requirements for emissions and noise did not.
- Q:How to test a forklift
- You usually have a forklift for a vocational school. It's easy to do, but there are places where real documents can be bought.
- Q:What should 80V force forklift voltage current be?
- Voltage 380, the current changes with charge time, from strong to weak. The internal combustion forklift is divided into regular internal combustion forklift, heavy lift truck, container forklift truck and side forklift truck. Internal-combustion forklift
- Q:What is the difference between a forklift and a trailer for a hydraulic drive?
- Just like the manual, you can hang up the gear without stepping on it, and only go forward and backward. It's better than manual. The left side is going down, and the handle on the right is leaning forward, and then backwards. Actually, you go to the scene and you have to try it first. Step on the brakes and try to go down. this
- Q:What are the types of battery forklifts
- And the forward electric forklift truck Carrying capacity of 1.0 ~ 2.5 tons, the door frame can be whole forward or back, back channel width when the operation is 2.7 ~ 3.2 meters, the hoisting height of up to 11 meters, commonly used in warehouse storage, unstuffing, of medium height. Electric pallets carry forklifts Carrying capacity of 1.6 ~ 3.0 tons, homework channel width is generally 2.3 ~ 2.3 meters, goods fork hoisting height is in commonly 210 mm or so, mainly used in the level of the warehouse handling and loading and unloading of goods. There are two modes of walking and driving. 2. Electric pallet stacking forklift bearing capacity is 1.0 ~ 1.6 tons, homework channel width is generally 2.3 ~ 2.3 meters, on the structure more than the electric pallet handling forklift truck door frame, fork cargo hoisting height within 4.8 meters, general is mainly used for stacking and handling of goods in the warehouse.
- Q:The forklift is limited in the factory area
- 5KM/H, the water on a forklift, people go beyond 5KM in an hour. A bit of efficiency is gone. In the case of safety, no matter, the maximum of 20KM/H, the maximum of 15KM/H. This is the top speed of a small tonklift truck.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range