Q:Companies do department door, want to be fixed on the ceiling, the ceiling is flat, how can the installation can be simple and beautiful? What material to install?

Sheep eye (that is, the following is a round of the top of the kind of screw, hardware stores are generally sold) directly screw up, the following with the line or the kind of fine chain can be simple and practical.

Q:Like pvc board and so on how to cut, very bad bonding it?

Generally with ABS board, pvc board, acrylic, plexiglass, it is recommended to buy engraving sculpture, the first glue is better, you can buy imported plastic.

Q:Installation works PVC wire tube castable board inside the plugging dredge there to sell?

Has processed a wire tube to clear the locator! With the feeling to find the location quite accurate, near the site after reading to me to purchase.

Q:Okay, I am learning/having to install the pipes to a new kitchen (home I just bought)..it has pvc pipes about 4 inches into the floor (sticking up) and then about 10 feet hanging in the basement (ceiling area)..these are not connected to anything, just hanging there.There are current copper pipes in the home and they do not reach the pvc pipe (nor do they have attachments for them; only an elbow).I want to know which is better pvc or PEX?And if it is either one,how do I attach it to copper pipes? I should also mention that the copper pipes along the ceiling are 1 and the extensions going to washer,bathroom, and former kitchen are 1/2. The pvc pipes hanging down from the new kitchen are 1/2. Any ideas from any handyman would be great. One more thing-no I cannot hire a plumber because I can't afford one. I am a lady; not richie rich. Either way..all advice is accepted and appriciated. Oh and if you could tell me what supplies I would need also, thanks.

This Site Might Help You. RE: Couple of plumbing questions (pvc versus pex)? Okay, I am learning/having to install the pipes to a new kitchen (home I just bought)..it has pvc pipes about 4 inches into the floor (sticking up) and then about 10 feet hanging in the basement (ceiling area)..these are not connected to anything, just hanging there.There are current copper pipes...

Q:Pvc board how to paint? With the general way of painting in the pvc board spray paint spray uneven, which know friends told me, his home to buy a few pvc board to do the closet, but how the experimental spray spray do not understand. Polyvinyl chloride material

Sandpaper polished into a mat noodles and then spray it

Q:How many years can I use a PVC

Standard design PVC gusset life should be around 15 years ? Cut the fun of the conscience of the boss produced about 3 years of scrap products

Q:Pvc board to do the props hard, I want to do cos props

PVC can be divided into: general-purpose PVC resin, high degree of polymerization PVC resin resin, cross-linked PVC resin. General type PVC resin is formed by polymerization of vinyl chloride monomer under the action of initiator. High polymerization degree PVC resin resin is formed by polymerization of vinyl chloride monomer under the action of initiator; high degree of polymerization refers to vinyl chloride monomer Polymerization resin is added in the polymerization system. The crosslinked PVC resin is a resin obtained by adding a chain extender in the vinyl chloride monomer polymerization system. So PVC made of props or have a certain degree of hardness, tube network prompts you: in the wear must be careful not to hurt the skin

Q:Such as the thickness is 5MM size is 417 * 512 size is calculated area? We 5mm thickness of the board is 0.25 yuan / cm to help me count Kazakhstan price a lot of hey? How is the calculation formula calculated?

PVC transparent board Product thickness: 2-20mm Maximum width of products: 1300mm Product Length: 100-10000mm Recommended Specifications: 1300 × 2000mm PVC soft board (coil) Product thickness: 1-10mm The maximum width of the product 1300mm Product Length: Unlimited Recommended Specifications: Width 1300 mm, weight 50kg / roll PVC hard board Product thickness limit: 25mm or less. The following are the same as the " Product width: 900mm, 1300mm, 1500mm.

Q:I recently used PP board (non-PVC board) to do a turtle pool, but in the paste when found with hot melt adhesive anyway will be leaking, has been repeated several times, but also with the screw

Aluminum foil, commonly known as foil, aluminum foil, etc., is a flattened metal aluminum manufacturing tools, mainly for kitchen cooking, containing food, or used to make some simple and clean materials. Thousands of tons of aluminum foil are used throughout the world for the protection and packaging of food, cosmetics and chemicals. Most of the aluminum foil is bright and the other side is gray and dumb. Food with aluminum foil can be wrapped in both sides of food, usually recommended to bright side wrapped, enhance the heat conduction effect.

Q:Wood board and PVC board with what glue combination

Universal glue full coating, thin coating, pressure paste. Or glass paste point paste.