D2S Hid Xenon Lighting Bulbs 35 Watt with High Quality
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Pairs pc
- Supply Capability:
- 500 Pairs per Week pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
35W D2S Hid Xenon Lighting Bulbs
1.power: 35W;
2.socket:D2S;
3.warranty: 18 months;
4. high quality;
Specifications of 35W D2S Hid Xenon Lighting Bulbs:
1. power: 35W;
2. socket: D2S;
3. Voltage: 12V or 24V;
4. Efficiency: 95% ;
5. lumination: 3,500 Lm;
6. Long life: 10 times longer than ordinary halogen lamps, about 3,000 - 5,000 hours;
7. Operating ambient temperature range: -20 ~ +85oC
8. Low voltage protection: when voltage of the battery is less than 9V, ballast will stop working to avoid HID bulb exhausting electric energy
9. Over-voltage protection: when voltage of the battery is more than 16V for trouble of power supply system and battery, ballast will stop working to prevent high voltage from burning bulb
10. Waterproof: up to DIN400500 legal standard
11. Anti-dust: up to SAE J575 legal standard
12. Shockproof: up to DIN40056 legal standard
- Q:Is the energy-saving lamp a fluorescent lamp?
- The energy-saving lamp belongs to the fluorescent lamp class.The same power of energy-saving lamps should be incandescent lamp brightness of more than 3.5--8 times.
- Q:Are there any differences between fluorescent lamps and energy-saving lamps? What are the differences between them?
- Rare earth phosphors are mainly used in office, store and factory high performance fluorescent lamps. Since the middle of 80s, with the development of less expensive fluorescent phosphor containing terbium, the application of this energy-saving lamp has been increasing rapidly. In mid 90s, the international launch of the TMT2 straight tube fluorescent lamp, the diameter of only 7mm, power is 6W~13W, light efficiency is 621m/W.T5 straight tube type fluorescent tube diameter is 16mm, power 14W~35W, 28W fluorescent light up to 104m/W, life is more than 16000h. in new development of high power light type 55W~120W is suitable for outdoor lighting compact energy saving rare earth fluorescent lamp, light efficiency more than 801m/W.
- Q:Why can fluorescent lamps emit various colors?
- Phosphor of red, green and blue three colors, yttrium oxide (red light, peak wavelength 611nm), magnesium aluminate (emitting green light),The peak wavelength is 541nm) and the barium magnesium aluminate (blue light, with a peak wavelength of 450nm) mixed in a certain proportion can be obtainedFluorescent powder of any color can be sent out
- Q:How to adjust light in fluorescent lamp
- The dimming of fluorescent lamp is a method of frequency modulation dimming. The power adjustment of the fluorescent light source is realized by the characteristics of the voltage conversion ratio and frequency correlation of the high frequency transformer in the ballast. The higher the frequency of the high frequency transformer in the ballast, the lower the output voltage of the high frequency transformer; the lower the frequency of the high frequency transformer, the higher the output voltage of the high-frequency transformer. The control circuit can adjust the oscillation frequency of the high frequency transformer, and can adjust the output luminous flux of the fluorescent lamp.
- Q:Maintenance and repair of fluorescent lamp
- Pay attention to maintaining a ventilation environment, not only to take away the dust, but also to reduce the temperature of the tube so as to extend the life of the tube. 1, the fluorescent lamp heating easy to attract dust, clean and ready to turn off the power, and then try to make the indoor air circulation, with a twist dry cloth stained with a little cleaner to clean the tube gently, and then use a clean dry cloth to clean the cleaning agent.
- Q:What's the difference between an energy-saving fluorescent lamp and a LED light?
- The semiconductor wafer consists of two parts,One part is the P type semiconductor, in which the hole dominates,The other end is the N type semiconductor, which is mainly electronic here.
- Q:What are the types of fluorescent lamps?
- The single side compact fluorescent lamp. The lamp, fluorescent lamp ballast and the lamp tightly integrated (ballast inside the base), in addition to destruction, to put the demolition, it was known as the "compact" fluorescent lamp. Because no additional ballast, the driving circuit in the ballast. The fluorescent lamp is self ballasted fluorescent lamp and fluorescent lamp. The lamp start by E27 lamp directly with the power supply network connection, can directly replace incandescent lamps.
- Q:What is a fluorescent lamp? What are fluorescent lights?
- The traditional fluorescent lamp type fluorescent lamp and electrodeless fluorescent lamp, traditional fluorescent lamp is a low pressure mercury lamp, mercury vapor is the use of low pressure in the discharge process of ultraviolet radiation, so that the phosphors emit visible light emitting principle, so it belongs to low pressure arc discharge light source. The traditional fluorescent lamp is equipped with two filaments. The filament is coated with electronic emission materials, three yuan carbonate (barium carbonate, strontium carbonate and calcium carbonate), commonly known as electronic powder. The alternating filament acts as a cathode and anode under alternating voltage. The inner wall of the lamp tube is coated with phosphor powder. The tubes are filled with argon at 400Pa-500Pa pressure and a small amount of mercury. After discharge, the liquid mercury evaporates into mercury vapor at a pressure of 0.8 Pa. In the electric field, the mercury atoms continuously from the original state is excited into the excited state, then spontaneous transitions to the ground state, and the radiation wavelength of 253.7nm and 185nm (the peak value of ultraviolet wavelength is 253.7nm, total radiation energy 70-80%; peak wavelength is 185nm, accounting for about 10% of the total radiant energy), to the release of excess energy. The fluorescent powder absorbs ultraviolet radiation and emits visible light. Fluorescent powder is different, the light is also different, that is, fluorescent lamps can be made white and various colors reasons.
1. Manufacturer Overview |
|
---|---|
Location | Guangzhou, Guangdong, China (Mainland) |
Year Established | 2009 |
Annual Output Value | US$50 Million - US$100 Million |
Main Markets | North America; South America; Eastern Europe; Southeast Asia; Africa; Oceania; Eastern Asia; Western Europe |
Company Certifications | ISO 9001:2000; CE; E-Mark |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | 61% - 70% |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
D2S Hid Xenon Lighting Bulbs 35 Watt with High Quality
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 Pairs pc
- Supply Capability:
- 500 Pairs per Week pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords