CSR64 MET COKE

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
1000 m.t.
Supply Capability:
100000 m.t./month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:


1. Structure of Metallurgical Coke of Coke Strength after Reactivity 65 Description:

Coke reactivity and carbon dioxide, oxygen and water vapor on the ability of chemical reaction, CRI = (G0, G1 / G0 x 100% (note: coke G0 - test sample weight, g, G1 - coke after reaction sample weight, g).Coke after coke strength after reaction is refers to the response under the action of thermal stress and mechanical force and resistance to fracture and wear ability.Coke in the blast furnace ironmaking, casting iron and fixed bed gasification process, will react with carbon dioxide, oxygen and water vapor.Due to the reaction of coke with oxygen and water vapor and carbon dioxide reaction similar laws, so most countries use coke reaction with carbon dioxide features assess coke reactivity.

Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.

On China's coke production distribution, the regional distribution imbalance of coking enterprises, mainly distributed in north China, east China and northeast China.

2. Main Features of the Metallurgical Coke of Coke Strength after Reactivity 65:

• Quality assurance

• Mutual benefit

• Preferential price

• Various choice

3. Metallurgical Coke of Coke Strength after Reactivity 65 Images:

 

CSR64 MET  COKE

CSR64 MET  COKE

CSR64 MET  COKE


4. Metallurgical Coke of Coke Strength after Reactivity 65 Specification:

 

Parameters

Guarantee

Rejection

Total Moisture ( As received basis )

8% max


Ash ( dry basis )

12.5% max

13.5%

Volatile Matter ( dry basis )

1.5% max

> 1.8%

Sulphur ( dry basis )

0.70% max

> 0.80%

Phosphorus ( dry basis )

0.035% max

> 0.045%

Size 10-30 mm 

90% min


+30 mm

5% max

8%

-10 mm

5% max

>8%

 


5. FAQ

CRI and strength after reaction coke reactivity of CSR repeatability r shall not exceed the following values:
CRIr 2.4% or less
CSR: 3.2% or less
The coke reactivity and strength after reaction of the test results are shown parallel arithmetic mean of test results.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Coke coal charcoal are used for what
Coke:The utility model is mainly used for blast furnace ironmaking and smelting of blast furnace for non-ferrous metals such as copper, lead, zinc, titanium, antimony, mercury, etc.. The use of coke instead of charcoal in the blast furnace has laid the foundation for the large-scale development of modern blast furnaces and is a major milestone in the history of metallurgy. In order to achieve better technical and economic indexes of blast furnace operation, the coke (metallurgical coke) must have proper chemical and physical properties. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Such as foundry coke, generally require large size, low porosity, high fixed carbon and low sulfur; chemical gasification, strict requirements for strength, but requires good response, high ash melting point; calcium carbide and coke production requirements to improve the fixed carbon content.
Q:China's coke iron smelting began in what time?
The ancient iron smelting method in smelting iron block, lower temperature, iron ore solid reduction sponge iron, and iron into play by forging. Smelting iron block, furnace, furnace with ground and shaft 3. The block iron making in our country began in the spring and Autumn period, and in the near future, the pig iron with more than 2% carbon dioxide was refined and used as a casting tool
Q:What's the connection between coking coal and coke
Coking coal is divided into two categories, the first category of coking coal dry ash free volatile Vdaf>10% ~ 28%, G>65 bond index, thickness, y = 25mm. This part of the coking coal is particularly good, can separate the qualified blast furnace coke. Another kind of coking coal dry ash based volatile Vdaf>20% ~ 28%, caking index G>50 ~ 65, coking than the former difference. Coking coal is a kind of typical coking coal, which has a good thermal stability
Q:What is the difference between coking coal and coke
Coking coal is an essential raw material for the production of coking coal, coking coal is one of the main uses of coke, coke is full of coking coal, coking coal is necessary for coke.
Q:Standard grade two grade coke standard
2, the phosphorus in the coke: iron metallurgical coke coke content should be in the following 0.02 - 0.03%.3, the ash content of coke: Coke Ash on the impact of the blast furnace smelting is very significant. Coke ash increased by 1%, coke consumption increased by 2 - 2.5%, therefore, the reduction of coke ash is very necessary.4, volatile in coke: according to the volatile content of coke can determine the maturity of coke. Such as volatile content is greater than 1.5%, is said to produce coke; volatile less than 0.5 - 0.7%, it is said to be overdone, the general maturity of metallurgical coke volatile is divided into about 1%.
Q:The pulverized coal is separated from the air to enhance the heat, in addition to the main coke
Ethylene containing carbon carbon double bond can add poly to generate polyvinyl chloride, can be used for food packaging, reaction equation is: nCH2=CH2Initiator,The answer is: nCH2=CH2Initiator;
Q:Who knows what the provisions of the coke train sampling country?
Test procedureDetermination of total moistureA, said the samples size less than 13mm with pre dried and weighed for about 500g (referred to 1g), smooth specimen,B, a sample tray is placed on the 170 a 180 C in the drying box, LH removed after cooling, weighing 5min. C, check dryness, each time 10min, until the two consecutive quality difference in LG, calculate the quality of the last time.Determination of moisture content of samplesA, with the weighing bottle drying to constant quality in advance and has quickly called weighing samples size less than 0.2mm uniform mixing of the 1 + 0.05g (referred to 0.0002g), flat on the weighing bottle.B, will be filled with a sample of the bottle to be placed in the 105-110 drying box drying 1H, remove the weighing bottle immediately covered with lid, put into the dryer to cool to room temperature (about 20min), weighing.C, check of dry, insult 15min, until two consecutive poor quality in 0.001g, take the quality of the last calculation, if quality is weight gain first calculated on the basis of.Five, the calculation of test resultsCalculation of total moisture content according to formula (L):
Q:Why use coke instead of carbon in blast furnace ironmaking
The reaction of the blast furnace ironmaking is the reduction reaction: the coke produces CO in the furnace, the CO reduces the iron oxide, and the part of CO burns, and the whole process will release a lot of heatCheck information, combined with the knowledge of the professional knowledge, for reference purposes only!
Q:What is coke? What is the use?
Lay the foundation for large-scale modern blast furnace, is an important milepost in the history of metallurgy. The blast furnace operation and achieve good technical and economic indexes, smelting with coke (coke) must have appropriate chemical and physical properties, including thermal properties in the smelting process.
Q:The chemical composition of coke m10.m25 refers to?
M10 refers to the wear resistance of coke, M25 refers to the crushing strength is the mechanical strength. Mainly the cold strength of coke. Coke is also the most important indicator is the hot state, CRI thermal reaction and CSR reaction intensity. In blast furnace production, both cold and thermal strength are important.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range